Facom 10.9/16 Dynamo Fork Wrench User Manual
Model: 10.9/16 | Brand: Facom
1. Uvod
This manual provides essential information for the safe and effective use of your Facom 10.9/16 Dynamo Fork Wrench. This precision tool is designed with inch fork ends and a 9 x 12 mm attachment, making it suitable for specific torque applications when used with compatible torque wrenches or handles.
2. Sigurnosna uputstva
Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede i oštećenje alata:
- Always wear appropriate personal protective equipment, including eye protection, when using hand tools.
- Inspect the wrench for any signs of damage or wear before each use. Do not use a damaged tool.
- Ensure the wrench head is securely attached to the compatible torque wrench or handle before applying force.
- Use the correct size wrench for the fastener to prevent slipping and damage to the fastener or tool.
- Do not use extension pipes or other unauthorized means to increase leverage, as this can overload the tool and cause injury.
- Držite ruke i prste dalje od mesta uklještenja.
- Store the tool in a clean, dry place away from moisture and corrosive materials.
3. Komponente
The Facom 10.9/16 Dynamo Fork Wrench consists of the following primary component:
- Facom 10.9/16 Fork Wrench Head (9/16" inch fork end with 9 x 12 mm attachment)
Image: The Facom 10.9/16 Dynamo Fork Wrench, a chrome-finished fork-shaped head with a square drive attachment point.
4. Podešavanje
Before using the Facom 10.9/16 Dynamo Fork Wrench, ensure proper setup:
- Identify a compatible torque wrench or handle that features a 9 x 12 mm square drive or similar attachment mechanism.
- Align the 9 x 12 mm attachment point of the fork wrench head with the drive of your torque wrench or handle.
- Securely attach the fork wrench head to the drive. Ensure it clicks into place or is firmly seated, depending on the mechanism of your torque wrench. A loose connection can lead to inaccurate torque readings or tool slippage.
- Verify that the wrench head is stable and does not wobble before proceeding with operation.
5. Uputstvo za upotrebu
Follow these steps for effective operation of your Facom 10.9/16 Dynamo Fork Wrench:
- Once the fork wrench head is securely attached to your torque wrench, set the desired torque value on the torque wrench according to the fastener's specifications.
- Position the 9/16" fork end of the wrench onto the fastener. Ensure a full and firm engagement with the fastener's flats.
- Apply steady and controlled force to the torque wrench handle in the direction required to tighten or loosen the fastener.
- Continue applying force until the torque wrench indicates that the set torque value has been reached (e.g., a click sound or visual indicator).
- Remove the wrench from the fastener carefully.
- After use, detach the fork wrench head from the torque wrench and clean it as per the maintenance instructions.
6. Održavanje
Proper maintenance ensures the longevity and performance of your Facom 10.9/16 Dynamo Fork Wrench:
- čišćenje: After each use, wipe the wrench clean with a dry, soft cloth to remove any dirt, grease, or debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- inspekcija: Regularly inspect the wrench for any signs of wear, cracks, deformation, or corrosion, especially around the fork ends and the attachment point.
- podmazivanje: The wrench head itself typically does not require lubrication. However, ensure the drive mechanism of your compatible torque wrench is properly maintained according to its own manual.
- Skladištenje: Store the wrench in a clean, dry environment, preferably in a tool box or on a tool board, to protect it from moisture, dust, and physical damage. Avoid storing it in direct sunlight or extreme temperatures.
7. Otkrivanje problema
U nastavku su navedeni uobičajeni problemi i njihova moguća rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Wrench does not fit fastener. | Incorrect fastener size or wrench size. | Verify the fastener size. Ensure you are using the correct 9/16" wrench for the application. |
| Ključ klizi na pričvršćivaču. | Worn fastener, worn wrench, or improper engagement. | Ensure full engagement of the wrench with the fastener. Replace worn fasteners or wrenches if necessary. |
| Wrench head is loose on torque wrench. | Improper attachment or incompatible drive. | Ensure the wrench head is fully seated and locked onto the torque wrench's 9 x 12 mm drive. Verify compatibility. |
8. Specifikacije
Technical specifications for the Facom 10.9/16 Dynamo Fork Wrench:
| Specifikacija | Detalj |
|---|---|
| Proizvođač | Facom |
| Broj dijela | 10.9/16 |
| Dimenzije proizvoda | 7.59 x 8.66 x 2.01 cm; 40 g |
| Broj modela | 10.9/16 |
| Veličina | 9/16" |
| Boja | Srebro |
| Stil | INCH FORK ENDS 9/16" |
| Završi | Polirano |
| Materijal | Krom-vanadijum čelik |
| Broj stavki u pakovanju | 1 |
| Broj elemenata | 1 |
| Stil glave | Square Drive Lock |
| Uključene komponente | 1 x tip/end piece |
| Baterije uključene? | br |
| Baterije su potrebne? | br |
| ASIN | B00B1BZZOS |
| Datum prve dostupnosti | 10. decembar 2013 |
| Dužina proizvoda | 410 milimetara |
| Number of Product Packages | 1 |
| Tip završetka | Polirano |
| Način rada | Mehanički |
| UPC | 604310110628 |
9. Garancija i podrška
Facom products are manufactured to high standards and are designed for durability. For specific warranty information, please refer to the warranty documentation provided with your purchase or visit the official Facom website. In case of issues or for technical support, please contact Facom customer service or your authorized dealer.
Please note that Amazon's return policy for this product is typically 30 days from the date of receipt, as per standard Amazon terms.
