1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the ABB RT6 24DC Safety Relay (Model: RT6, Part Number: 2TLA010026R0000). Please read this manual thoroughly before attempting any installation or operation to ensure proper functionality and to prevent potential hazards. Keep this manual in a safe place for future reference.
2. Sigurnosne informacije
Važno: Always observe local and national safety regulations and standards when installing, operating, or maintaining this device. Failure to do so may result in serious injury or equipment damage.
- Only qualified personnel should install, operate, and service this equipment.
- Disconnect all power before performing any work on the relay or connected circuits.
- Osigurajte ispravno uzemljenje kako biste spriječili strujni udar.
- Do not bypass or disable any safety features of the relay or the system it controls.
- Zaštitite uređaj od vlage, prašine i ekstremnih temperatura.
Sigurnosni simboli:
- UPOZORENJE: Označava potencijalno opasnu situaciju koja, ako se ne izbjegne, može dovesti do smrti ili ozbiljne ozljede.
- OPREZ: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury or equipment damage.
- OBAVIJEST: Indicates important information not related to personal injury.
3. Proizvod je gotovview
The ABB RT6 24DC Safety Relay is designed to monitor safety functions in industrial applications, ensuring machine and personnel safety. It features a compact design and is suitable for various safety circuits.
Slika 3.1: Prednja strana view of the ABB RT6 24DC Safety Relay. This image displays the compact housing, terminal blocks for wiring connections, and indicator LEDs for status monitoring.
Ključne karakteristike:
- Kompaktan dizajn za instalaciju koja štedi prostor.
- 24V DC radna voltage.
- Multiple safety outputs for flexible integration.
- Diagnostic LEDs for quick status indication.
- Easy wiring via removable terminal blocks.
4. Podešavanje
4.1 Montaža
The RT6 safety relay is designed for DIN rail mounting. Ensure the DIN rail is securely fastened within the control cabinet. Snap the relay onto the DIN rail by hooking the top edge first, then pressing down until it clicks into place.
4.2 Ožičenje
UPOZORENJE: Ensure all power is disconnected before wiring. Incorrect wiring can lead to equipment damage or personal injury.
- Refer to the wiring diagram provided on the side of the unit or in the detailed technical documentation for specific terminal connections.
- Connect the 24V DC power supply to the designated power input terminals.
- Connect safety input devices (e.g., emergency stop buttons, light curtains) to the safety input terminals.
- Connect the safety outputs to the controlled devices (e.g., contactors, motor starters).
- Uvjerite se da su svi priključci sigurni i pravilno izolirani.
4.3 Početno napajanje
After completing all wiring, apply power to the system. Observe the diagnostic LEDs on the front panel. The power LED should illuminate, and other LEDs will indicate the status of the safety inputs and outputs.
5. Operativni
5.1 Osnovni rad
The RT6 safety relay operates automatically once correctly configured and powered. When all safety inputs are closed (i.e., no safety function is active), the safety outputs will activate, allowing the controlled machinery to operate. If any safety input opens, the safety outputs will immediately de-energize, bringing the machinery to a safe state.
5.2 Indikatorska svjetla
The front panel features several LEDs to indicate the relay's status:
- LED za napajanje: Illuminates when the relay receives power.
- Ulazne LED diode: Indicate the status of the safety input channels (e.g., green for active, off for open).
- Izlaz LED: Indicates the status of the safety outputs (e.g., green for active, off for de-energized).
- LED dioda greške: Illuminates or flashes to indicate a fault condition within the relay or the safety circuit. Refer to the troubleshooting section for fault codes.
5.3 Procedure resetovanja
After a safety function has been activated (e.g., an emergency stop button pressed), the safety relay typically requires a manual or automatic reset before the safety outputs can be re-energized. The reset method depends on the relay's configuration:
- Ručno resetiranje: Press the designated reset button on the control panel after the safety circuit is restored.
- Automatsko resetiranje: The relay automatically resets once the safety circuit is restored. This mode is generally used for specific applications and requires careful risk assessment.
6. Održavanje
Regular maintenance ensures the continued reliable operation of the ABB RT6 Safety Relay.
6.1 Raspored inspekcije
- mjesečno: Visually inspect the relay for any signs of physical damage, discoloration, or loose connections.
- Godišnje: Perform a functional test of the safety circuit, including the relay, by activating each safety input device (e.g., pressing E-stop, breaking light curtain beam) and verifying that the safety outputs de-energize.
6.2 Čišćenje
OPREZ: Isključite napajanje prije čišćenja.
Clean the exterior of the relay with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the housing. Ensure no dust or debris accumulates around the terminals or ventilation openings.
7. Otkrivanje problema
If the RT6 safety relay is not functioning as expected, refer to the following table for common issues and solutions.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Relay not powering on (Power LED off) | No 24V DC supply; Incorrect wiring; Blown fuse. | Check power supply connections; Verify wiring against diagram; Check and replace fuse if necessary. |
| Safety outputs not activating (Output LED off) | Safety input open; Relay in fault state; Reset required. | Check all safety input devices; Clear any fault conditions; Perform a manual reset if configured. |
| Fault LED illuminated/flashing | Internal fault; Wiring error; External device fault. | Consult the detailed technical manual for specific fault codes; Verify all wiring; Check connected safety devices. |
| Unexpected de-energization of outputs | Safety input activated; Power interruption. | Inspect safety devices for activation; Check power supply stability. |
If the problem persists after following these steps, contact ABB technical support.
8. Specifikacije
The following are key technical specifications for the ABB RT6 24DC Safety Relay:
- Model: RT6
- Broj dijela: 2TLA010026R0000
- Dimenzije proizvoda: 1.77 x 4.72 x 3.31 inča
- Težina artikla: 2.2 funte
- Način rada: Automatski
- Coil Voltage: 24 volti DC
- Kontakt Trenutna ocjena: 10 Amps
- Maximum Switching Voltage: 24 Volts
9. Garancija
The ABB RT6 24DC Safety Relay is covered by ABB's standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official ABB website or contact your local ABB representative. Keep your purchase receipt as proof of purchase.
10. Podrška
For technical assistance, product inquiries, or service requests, please contact ABB customer support. You can find contact information, FAQs, and additional resources on the official ABB webstranica: https://new.abb.com/contact-us
When contacting support, please have the product model (RT6) and part number (2TLA010026R0000) readily available.
