1. Uvod
Thank you for choosing the Marathon CL030033WD Atomic Self-Setting Wall Clock. This clock is designed for accuracy and convenience, automatically synchronizing with the atomic time signal to ensure precise timekeeping. It also features a clear digital display, multiple time zones, and temperature readings. This manual provides detailed instructions for setting up, operating, and maintaining your new clock.
Slika 1.1: Prednja strana view of the Marathon CL030033WD Atomic Self-Setting Wall Clock, displaying time, date, day, and temperature.
2. Značajke proizvoda
- Atomska sinhronizacija vremena: Automatically sets and adjusts time via the WWVB radio signal for precise accuracy.
- Veliki ekran koji se lako čita: Clear digital display for time, date, day of the week, and indoor temperature.
- Više vremenskih zona: Supports 8 selectable time zones.
- Self-Setting: Simply insert batteries for automatic setup.
- Raznovrsna montaža: Includes a built-in table stand and wall-mount option.
- Elegantan dizajn: Features a brushed steel effect frame with a wood tone finish.
- Prikaz temperature: Shows indoor temperature in both Celsius and Fahrenheit.
Image 2.1: The Marathon Atomic Wall Clock in a room setting, highlighting its large, easy-to-read display, multiple modes (time, date, temperature), and 8 time zone capability.
Image 2.2: Close-up of the clock face with icons representing its self-setting function, versatile mounting options, and sleek design.
Slika 2.3: Detaljno view of the clock's dynamic display, showing the date, day of the week, and temperature in both Celsius and Fahrenheit.
3. Sadržaj paketa
Molimo Vas da provjerite sadržaj paketa kako biste bili sigurni da su svi artikli prisutni:
- Marathon CL030033WD Atomic Self-Setting Wall Clock
- 2 x AA baterije
- Korisnički priručnik (ovaj dokument)
4. Podešavanje
4.1 Instalacija baterije
- Pronađite poklopac odjeljka za baterije na stražnjoj strani sata.
- Skinite poklopac.
- Insert the two AA batteries, ensuring the correct polarity (+ and -).
- Vratite poklopac odeljka za baterije.
4.2 Initial Power-Up and Atomic Signal Reception
Upon battery installation, the clock will automatically power on and begin searching for the WWVB atomic time signal. This process may take several minutes to several hours, depending on your location and environmental conditions. During this time, the signal reception indicator (often a wave icon) will flash.
- For optimal signal reception, place the clock near a window, away from electronic devices that may cause interference.
- The clock is designed to receive signals primarily in North America. Signal strength may vary in other regions.
- Once the signal is successfully received, the time and date will automatically set, and the signal indicator will become solid.
Image 4.1: The Marathon Atomic Wall Clock displayed in a living room, illustrating its ease of setup and use, including battery installation.
5. Uputstvo za upotrebu
The clock's display provides the following information:
- vrijeme: Large digits indicate the current time (12-hour format with AM/PM indicator).
- Datum: Mjesec i dan.
- Dan u sedmici: Skraćeni naziv dana.
- temperatura: Unutrašnja temperatura u Celzijusima ili Fahrenheitima.
- Indikator atomskog signala: Shows the status of atomic signal reception.
5.1 Funkcije dugmadi
The clock typically has buttons on the back for various settings. Common buttons include:
- SET: Enters or confirms setting modes.
- UPUTE: Toggles between display modes or setting options.
- WAVE / RCC: Manually initiates atomic signal search.
- VREMENSKA ZONA: Selects the desired time zone.
- +/C/F: Adjusts values during setting or switches temperature unit (Celsius/Fahrenheit).
6. Podešavanje vremenske zone
To set your local time zone:
- Pritisnite VREMENSKA ZONA button. The current time zone will begin to flash.
- Pritisnite + or - button (if available, or MODE/SET) to cycle through the available time zones (e.g., PST, MST, CST, EST, AST, NST, HST, AKST).
- Once your desired time zone is displayed, press the SET button to confirm. The clock will then adjust to the correct time for that zone after receiving the atomic signal.
7. Ručno podešavanje vremena
If the atomic signal is consistently unavailable or if you prefer to set the time manually:
- Pritisnite i držite SET button for approximately 3-5 seconds until the hour digits begin to flash.
- Koristite + or - dugme za podešavanje sata.
- Pritisnite SET ponovo da biste se prebacili na cifre minuta, a zatim podesite pomoću + or -.
- Nastavite pritiskati SET za ciklično mijenjanje postavki godine, mjeseca i dana, podešavajući svaku od njih pomoću + or -.
- After setting all desired parameters, press SET one last time to exit the manual setting mode.
Napomena: If the atomic signal is enabled, the clock may attempt to override manual settings once a strong signal is received. To prevent this, you may need to disable the atomic synchronization feature if available (refer to specific button functions on your clock).
8. Održavanje
8.1 Zamjena baterije
When the display dims or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 4.1. Always use fresh AA alkaline batteries.
8.2 Čišćenje
To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or chemical solvents, as these may damage the clock's finish or display.
9. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Sat ne podešava vrijeme automatski | Weak or no atomic signal reception. | Relocate the clock near a window, away from electronic interference. Manually initiate signal search using the WAVE/RCC button. Ensure you are within the WWVB signal range (North America). |
| Prikazuje se pogrešno vrijeme | Incorrect time zone selected; temporary signal loss. | Verify the time zone setting (Section 6). Allow time for the clock to re-synchronize with the atomic signal. If persistent, try manual time setting (Section 7). |
| Displej je zatamnjen ili prazan | Slabe ili ispražnjene baterije. | Replace batteries with fresh AA alkaline batteries (Section 8.1). |
| Očitavanje temperature je netačno | Clock exposed to direct sunlight or heat source. | Premjestite sat na mjesto sa stabilnom temperaturom okoline. |
10. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | CL030033WD |
| Brand | Marathon |
| Display Type | Digital (Analog style digits) |
| Posebna karakteristika | Atomic Time Synchronization, Temperature Display |
| Izvor napajanja | 2 x AA baterije (uključene) |
| Materijal | Wood (Frame) |
| Dimenzije (DxŠxV) | 22.9 x 14 x 2.5 centimetra (približno 9 x 5.7 x 1 inča) |
| Težina artikla | 531 grama (približno 1.17 lbs) |
| Vrsta montaže | Zidni nosač, Stolni stalak |
Image 10.1: The Marathon Atomic Wall Clock illustrating its physical dimensions, including overall width (9 inches / 23 cm), height (5.7 inches / 14.5 cm), and digit height (4 inches / 10 cm).
11. Garancija i podrška
Marathon products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Marathon website. For technical support or inquiries, please contact Marathon customer service through their official channels.
