Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teka Baltic Sport Shower Set model 790026700. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Sigurnosne informacije
- Uvijek isključite glavni dovod vode prije početka bilo kakvih instalacijskih ili održavajućih radova.
- Osigurajte da su svi spojevi sigurni kako biste spriječili curenje.
- Ne koristite abrazivna sredstva za čišćenje ili jake hemikalije na hromiranoj površini, jer to može uzrokovati oštećenja.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom vodoinstalateru.
Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- Shower Set (including shower head, hose, and rail)
- Montažni hardver
- Uputstvo za instalaciju (ovaj dokument)
Postavljanje i instalacija
Follow these steps for proper installation of your Teka Baltic Sport Shower Set:
- Pripremite prostor za instalaciju: Turn off the main water supply. Clear the area where the shower set will be installed.
- Mount the Shower Rail: Position the shower rail on the wall at the desired height. Mark the drilling points for the mounting brackets. Drill holes and insert wall plugs. Secure the mounting brackets to the wall using the provided screws.
- Attach the Shower Rail: Slide the shower rail onto the mounted brackets and secure it according to the specific design of your rail.
- Spojite crijevo za tuširanje: Attach one end of the 175 cm braided steel hose to the shower mixer outlet (not included) and the other end to the shower head. Ensure all connections are hand-tightened, then use a wrench to gently tighten further, being careful not to overtighten.
- Place the Shower Head: Insert the shower head into the adjustable holder on the shower rail.
- Test na curenje: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly until they stop.
Image 1: The complete Teka Baltic Sport Shower Set, including the shower rail, adjustable holder, and round shower head, ready for installation. This image illustrates the components that need to be assembled and mounted on the wall.
Uputstvo za upotrebu
The Teka Baltic Sport Shower Set is designed for ease of use:
- Podešavanje protoka i temperature vode: Use your existing shower mixer (not included) to control the water flow and temperature.
- Korištenje tuš glave: The round shower head features an anti-limescale system. Water sprays from multiple nozzles.
- Adjusting Shower Head Height: The shower head holder on the rail can be easily adjusted up or down to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image 2: A close-up front view of the Teka Baltic Sport round shower head, showcasing its multiple nozzles and anti-limescale design.
Slika 3: Strana A view of the Teka Baltic Sport shower head, highlighting its ergonomic handle and chrome finish.
Održavanje
Regular cleaning and maintenance will ensure the longevity and appearance of your shower set:
- Čišćenje hromirane površine: Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Sistem protiv kamenca: The shower head is equipped with an anti-limescale system. Periodically rub the rubber nozzles on the shower head to dislodge any mineral deposits. For stubborn deposits, a solution of white vinegar and water can be used, but ensure it is rinsed off completely.
- Održavanje crijeva: Inspect the braided steel hose periodically for any signs of wear or damage. Replace if necessary.
Rješavanje problema
Evo rješenja za uobičajene probleme s kojima se možete susresti:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nizak pritisak vode iz tuša | Clogged nozzles or mineral buildup. | Clean the shower head nozzles by rubbing them to remove limescale. If necessary, soak the shower head in a descaling solution. |
| Curenje vode iz priključaka | Labavi spojevi ili istrošene podloške. | Ensure all connections are tightened properly. Check and replace any worn rubber washers. |
| Shower head not staying in position | Holder mechanism is loose or worn. | Tighten the holder mechanism if possible. If worn, the holder may need replacement. |
Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Teka |
| Broj modela | 790026700 |
| Boja | Chrome |
| Tip završetka | Hromirano |
| Broj drške | 1 (for shower mixer, not included) |
| Težina artikla | 5.8 kilograma |
| Dužina creva | 175 cm (Braided Steel) |
| GTIN | 08413509203667 |
| Proizvođač | Teka |
Garancija i podrška
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Teka webSačuvajte dokaz o kupovini za eventualne reklamacije.
