PIKO G Scale Reed Switch Assembly (Model 35267) Instruction Manual

Uvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your PIKO G Scale Reed Switch Assembly, Model 35267. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

Postavljanje i instalacija

The PIKO G Scale Reed Switch Assembly (35267) is designed for use with G scale model train layouts to detect the presence of a train. It typically works by sensing a magnet attached to the underside of a locomotive or rolling stock.

Komponente:

Reed Switch Assembly (Model 35267)
Connecting wires (if not integrated)
Mounting hardware (screws, clips, etc. - not always included, check packaging)

Koraci instalacije:

Identifikujte plasman: Determine the desired location on your G scale track where train detection is required. This could be for signaling, automated accessories, or track occupancy indication.
Mount the Reed Switch: Securely attach the reed switch assembly to the track bed or adjacent to the track. Ensure the switch is positioned so that a magnet on the train will pass directly over or very close to it. The exact mounting method may vary based on your layout and the specific design of the assembly.
Povežite ožičenje: Connect the reed switch to your control system, signal, or accessory. Refer to the wiring diagram of your specific control unit for correct connections. Reed switches typically have two wires and act as a simple open/close contact.
Test funkcionalnost: Place a locomotive or car with a magnet over the installed reed switch. Verify that the connected accessory or signal responds as expected. Adjust the position of the reed switch or magnet if necessary to achieve reliable detection.

Image: PIKO G Scale Reed Switch Assembly (Model 35267). This image shows the general appearance of the reed switch assembly, which is used to detect the presence of G scale model trains on a track.

Uputstvo za upotrebu

The PIKO G Scale Reed Switch Assembly operates passively, meaning it does not require external power to function as a switch. It is activated by a magnetic field.

When a train equipped with a magnet passes over the reed switch, the magnetic field causes the internal contacts of the switch to close.
This closure completes an electrical circuit, sending a signal to the connected device (e.g., a signal light, a sound module, or a relay for track power control).
Once the magnet moves away, the contacts open, breaking the circuit and deactivating the connected device.

Ensure that the magnets on your rolling stock are strong enough and positioned correctly to reliably trigger the reed switch.

Održavanje

The PIKO G Scale Reed Switch Assembly is designed for durability and requires minimal maintenance.

čišćenje: Periodically inspect the reed switch for dust, dirt, or debris. Gently clean with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
inspekcija: Check the wiring connections regularly to ensure they are secure and free from corrosion or damage.
Uslovi okoline: While designed for G scale outdoor use, prolonged exposure to extreme weather conditions (heavy rain, snow, direct sunlight) can affect longevity. Consider protective measures if installed in exposed outdoor environments.
Skladištenje: If removing the assembly for storage, keep it in a clean, dry place away from strong magnetic fields.

Rješavanje problema

If your reed switch assembly is not functioning as expected, consider the following:

Problem	Mogući uzrok	Rješenje
Switch does not activate.	Magnet on train is too weak or improperly positioned. Reed switch is too far from the magnet. Wiring connection is loose or incorrect. Reed switch is faulty.	Ensure a strong magnet is attached to the train, directly above the switch. Adjust the reed switch position closer to the track/magnet. Provjerite sve ožičenja radi sigurnosti i ispravnosti. Test the reed switch with a separate magnet; if it still doesn't activate, it may need replacement.
Switch activates erratically.	Interference from other magnetic sources. Loose mounting, causing vibration. Weak or inconsistent magnet on train.	Ensure no other strong magnets are nearby. Securely mount the reed switch to prevent movement. Replace or reinforce the train magnet.

Specifikacije

Broj modela: PIKO 35267
Vrsta proizvoda: G-Reed Switch Assembly
mjerač: G Scale
Proizvođač: PIKO
Preporučena dob: 15 godina i više
ASIN: B00ACGFZ3Y

Garancija i podrška

For specific warranty information, please refer to the documentation provided with your purchase or contact your retailer. PIKO products are generally covered by a manufacturer's warranty against defects in materials and workmanship.

For technical support or further assistance, please contact PIKO customer service or your authorized PIKO dealer. Contact details can typically be found on the official PIKO weblokacija ili ambalaža proizvoda.

	PIKO G digitalni sistem: Prekoview i komponente za modele vlakova u G-skali Istražite PIKO G digitalni sistem, sveobuhvatno rješenje za napredno upravljanje modelima vlakova u G-skali. Saznajte više o digitalnoj centralnoj stanici, pojačivačima, dekoderima prekidača, daljinskom upravljaču Navigator i još mnogo toga za povezano i bežično upravljanje.
	PIKO Električna lokomotiva Rh 1000 NS: Uputstvo za upotrebu i rezervni dijelovi (#97504) Detaljne upute za PIKO HO električnu lokomotivu Rh 1000 NS (Model #97504), uključujući montažu, demontažu, instalaciju dekodera i zvuka, te sveobuhvatan popis rezervnih dijelova.
	PIKO SmartDecoder XP Sound Next18 za električnu lokomotivu BR 243 TT - Višeprotokolni dekoder zvuka Detaljne specifikacije i karakteristike PIKO SmartDecoder XP Sound Next18, višeprotokolnog dekodera zvuka za električne lokomotive u mjerilu TT, koji nudi napredni zvuk, kontrolu motora i kompatibilnost s digitalnim sistemom.
	Vodič za instalaciju i upotrebu višeprotokolnog dekodera PIKO 76790 Sveobuhvatan vodič za instaliranje, programiranje i rad PIKO 76790 multiprotokolnog dekodera. Saznajte više o kompatibilnosti s DCC i Motorola, regulaciji opterećenja, preključivanju pickup papučice i tehničkim specifikacijama za ljubitelje modelnih vlakova.
	PIKO SmartControlwlan digitalni komandni upravljački sistem - Uputstvo za upotrebu Sveobuhvatno uputstvo za upotrebu PIKO SmartControlwlan DCC sistema, koje detaljno opisuje podešavanje, rad, upravljanje lokomotivom i priborom, programiranje ruta i postavke za ljubitelje modelne željeznice. Naučite kako da kontrolišete vozove, skretnice, signale i programirate životopise pomoću ovog sistema koji je jednostavan za korištenje.
	PIKO RH S489.0 TT Model električne lokomotive: Upute i rezervni dijelovi Sveobuhvatni vodič za model električne lokomotive PIKO RH S489.0 TT, koji sadrži detaljne upute, tehničke specifikacije, raspored funkcija i kompletan popis rezervnih dijelova. Uključuje informacije o PIKO SmartDecoder XP Sound Next18.

Piko 35267