LD Systems LDWSECO2X2R2 Double Receiver User Manual

Uvod

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Važna sigurnosna uputstva

• Pročitajte ove upute: Sva uputstva za bezbednost i rad treba pročitati pre nego što proizvod počne da radi.
• Keep these instructions: Sigurnosna uputstva i uputstva za upotrebu treba sačuvati za buduću upotrebu.
• Obratite pažnju na sva upozorenja: Treba se pridržavati svih upozorenja na proizvodu i u uputama za upotrebu.
• Pratite sva uputstva: Treba se pridržavati svih uputstava za rad i upotrebu.
• Nemojte koristiti ovaj aparat u blizini vode: Nemojte koristiti ovaj proizvod u blizini vode ili vlage.
• Clean only with dry cloth: Isključite ovaj proizvod iz zidne utičnice prije čišćenja.
• ventilacija: Ne blokirajte ventilacijske otvore. Instalirajte u skladu s uputama proizvođača.
• Izvori napajanja: Koristite ovaj proizvod samo s vrstom izvora napajanja naznačenom na naljepnici s oznakom.
• servisiranje: Ne pokušavajte sami da servisirate ovaj proizvod jer otvaranje ili uklanjanje poklopaca može da vas izloži opasnom voltage ili druge opasnosti. Sav servis prepustite kvalifikovanom serviseru.

Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze sve dolje navedene stavke:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Korisnički priručnik (ovaj dokument)
• Antennas (quantity may vary based on model variant)

Product Overview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Slika: Front view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Kontrole na prednjoj ploči:

• Dugme za napajanje: Uključuje ili isključuje jedinicu.
• Prikaz kanala: Shows the currently selected channel for each receiver.
• Kontrole jačine zvuka: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Priključci na stražnjoj ploči:

• Antenski ulazi: Povežite isporučene antene.
• Balansirani XLR izlazi: For connecting to professional audio mixers or amplifiers.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• DC ulaz napajanja: Spojite priloženi adapter za napajanje.

Vodič za postavljanje

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Raspakujte prijemnik: Pažljivo izvadite sve komponente iz pakovanja.
2. Povežite antene: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Position the Receiver: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Povežite audio izlaze:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or amplifier.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Priključite napajanje: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Uključeno: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Uputstvo za upotrebu

1. Uključeno: Ensure both the receiver and your wireless transmitters are powered on.
2. Provjerite signal: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Podesite glasnoću: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Audio monitora: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Odabir kanala (ako je primjenjivo): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Iskljuciti: When finished, power off your transmitters first, then power off the receiver.

Održavanje

• čišćenje: Isključite napajanje prije čišćenja. Koristite meku, suhu krpu za brisanje vanjske strane prijemnika. Ne koristite tekuća sredstva za čišćenje ili aerosolne sprejeve.
• Skladištenje: When not in use for extended periods, store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• Antene: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• adapter za napajanje: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Rješavanje problema

Specifikacije

Garancija i podrška

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Napomena: Informacije o dostupnosti rezervnih dijelova nisu navedene u detaljima o proizvodu.