1. Uvod
Thank you for choosing the BLACK+DECKER Multi-Evo Trimmer Head Attachment ERH183. This attachment is designed to convert your BLACK+DECKER Multi-Evo 18V base unit into a versatile trimmer or router, suitable for various woodworking tasks such as edge profiling, grooving, and decorative work. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.
2. Sigurnosne informacije
Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read and understand all instructions before operating this attachment. Keep this manual for future reference.
- Nosite odgovarajuću ličnu zaštitnu opremu: Uvijek nosite zaštitne naočale, zaštitu za sluh i masku za prašinu.
- Ensure the workpiece is secure: Clamp or otherwise secure the material you are working on to prevent movement during operation.
- Držite ruke podalje od područja rezanja: Never touch the router bit while the tool is operating or connected to power.
- Disconnect power before making adjustments: Always remove the battery from the Multi-Evo base unit before changing bits, adjusting depth, or performing maintenance.
- Use sharp and correct bits: Dull or damaged bits can cause kickback and reduce cutting efficiency. Use bits designed for the material and task.
- Održavajte čvrst stisak: Hold the Multi-Evo unit firmly with both hands during operation.
- Radite u dobro prozračenom prostoru: Wood dust can be hazardous.
3. Proizvod je gotovview
The ERH183 trimmer head attachment is designed for precision routing and trimming. Familiarize yourself with its components before use.
Figure 3.1: The BLACK+DECKER Multi-Evo Trimmer Head Attachment ERH183. This image shows the compact design of the trimmer head, featuring the collet nut, base plate, and depth adjustment mechanism.
Figure 3.2: Trimmer head with its clear base, allowing visibility of the cutting area during operation. The base is designed for stability and precise control.
4. Podešavanje
4.1 Attaching the Trimmer Head to the Multi-Evo Base Unit
- Ensure the Multi-Evo base unit (sold separately) is switched off and the battery is removed.
- Align the trimmer head attachment with the Multi-Evo base unit.
- Push the attachment onto the base unit until it clicks securely into place.
- Verify that the attachment is firmly seated and does not wobble.
Figure 4.1: Illustrates the trimmer head attachment being connected to the BLACK+DECKER Multi-Evo 18V base unit. Ensure a secure connection before use.
4.2 Installing and Changing Router Bits
- Ensure the battery is removed from the Multi-Evo base unit.
- Press and hold the spindle lock button on the trimmer head.
- Using the provided wrench, loosen the collet nut by turning it counter-clockwise.
- Insert the desired router bit into the collet, ensuring at least 3/4 of the shank is inserted.
- Tighten the collet nut firmly with the wrench while holding the spindle lock button. Do not overtighten.
- Otpustite dugme za zaključavanje vretena.
Figure 4.2: An assortment of common router bits, including straight, chamfer, and round-over profiles. Select the appropriate bit for your specific woodworking task.
Figure 4.3: The wrench used for tightening and loosening the collet nut when installing or changing router bits.
4.3 Podešavanje dubine rezanja
- Ensure the battery is removed from the Multi-Evo base unit.
- Place the trimmer head on a flat surface with the router bit touching the surface.
- Loosen the depth adjustment knob or lever on the side of the trimmer head.
- Raise or lower the motor housing until the desired cutting depth is achieved.
- Tighten the depth adjustment knob or lever securely.
5. Uputstvo za upotrebu
Once the trimmer head is attached and the bit and depth are set, you can begin operation.
5.1 Uključivanje/isključivanje
- Insert the 18V battery into the Multi-Evo base unit.
- To start the tool, press the trigger switch on the Multi-Evo base unit. The speed is variable depending on trigger pressure.
- Da biste zaustavili alat, otpustite prekidač okidača.
5.2 Tehnike usmjeravanja
Always perform a test cut on a scrap piece of material before working on your main project.
- Smjer rezanja: For optimal control and finish, always feed the router against the rotation of the bit. This typically means moving from left to right when routing along an edge.
- Plitki rezovi: For deeper profiles, make several shallow passes rather than one deep cut. This reduces strain on the tool and bit, and provides a cleaner finish.
- Edge Routing: Keep the base plate flat against the workpiece edge. Use a guide if necessary for straight cuts.
- Ubodni rezovi: For internal cuts, ensure the bit is not touching the workpiece when starting the tool. Slowly lower the bit into the material once full speed is reached.
Figure 5.1: A user demonstrating edge profiling with the BLACK+DECKER Multi-Evo Trimmer Head. The tool is held firmly with both hands, guiding it along the edge of a wooden board.
Figure 5.2: The trimmer head in action, showing the clear base providing visibility of the cutting path on a wooden surface.
6. Održavanje
Regular maintenance ensures the longevity and optimal performance of your trimmer head attachment.
- čišćenje: After each use, disconnect the attachment from the power unit and use a soft brush or compressed air to remove dust and debris from the collet, base, and ventilation openings. Do not use solvents or abrasive cleaners.
- Inspekcija bitova: Regularly inspect router bits for sharpness and damage. Replace dull or chipped bits immediately to prevent poor cuts and potential kickback.
- Skladištenje: Store the trimmer head attachment in a dry, secure place, out of reach of children.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Alat se ne pokreće. | Baterija nije pravilno umetnuta ili je prazna. | Ensure battery is fully charged and properly inserted into the Multi-Evo base unit. |
| Poor cut quality or burning of wood. | Dull or incorrect router bit; feeding too fast; incorrect depth setting. | Replace with a sharp, appropriate bit. Reduce feed rate. Adjust cutting depth for multiple shallow passes. |
| Pretjerane vibracije. | Router bit not properly secured; damaged bit; attachment not fully seated. | Ensure collet nut is tightened. Replace damaged bit. Re-attach trimmer head securely to the base unit. |
| Tool stalls during operation. | Overloading the tool; dull bit; battery low. | Reduce feed rate. Use a sharp bit. Charge or replace battery. Make shallower cuts. |
8. Specifikacije
- Broj modela: ERH183
- Dimenzije proizvoda: 9 x 13.5 x 9 cm
- Težina artikla: 0.4 kilograma
- Izvor napajanja: Battery Powered (requires BLACK+DECKER Multi-Evo 18V base unit and battery, sold separately)
- Brzina bez opterećenja: 0-9000 RPM (when used with Multi-Evo 18V base unit)
- Veličina stezne čahure: 6mm (compatible with standard 6mm shank router bits)
- Material (Attachment Housing): Izdržljive plastične i metalne komponente
- Material (Router Bits - typical): High Carbon Steel, Stainless Steel (bits sold separately)
- Boja: Crna
9. Garancija i podrška
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your BLACK+DECKER Multi-Evo 18V base unit or visit the official BLACK+DECKER webSačuvajte dokaz o kupovini za slučaj reklamacije.
Webstranica: www.blackanddecker.com