APC Back-UPS RS 700 VA Tower UPS (Model BR700G) User Manual

1. Uvod

The APC Back-UPS RS 700 VA Tower UPS (Uninterruptible Power Supply) provides reliable battery backup and surge protection for your electronic devices. Designed to safeguard your equipment from power outages, surges, and spikes, this unit ensures continuous operation and protects against data loss. It features a 700VA/450W capacity, offering approximately 3 minutes of full load runtime.

Slika 1: Front view of the APC Back-UPS RS 700 VA Tower UPS. The display shows current load, online status, estimated run time in minutes (e.g., 30 minutes), and AVR (Automatic Voltage Regulation) status. Power and display control buttons are located at the top.

Ključne karakteristike:

• Zeleni način rada: Patented operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Battery Failure Notification: Pruža ranu analizu kvarova na baterijama što omogućava pravovremeno preventivno održavanje.
• Power-Saving Outlets: Automatically cuts power to idle equipment to conserve electricity.
• Resettable Circuit Breaker: Jednostavan oporavak od preopterećenja; nema potrebe za zamjenom osigurača.
• Battery-Protected and Surge-Only Outlets: Protects connected equipment from power surges and spikes, while providing battery backup power during outages to critical devices.
• Cold-Start Capable: Pruža privremeno napajanje baterije kada je struja nestala.
• Baterije koje se mogu mijenjati tokom rada: Osigurava čisto, neprekidno napajanje zaštićene opreme tokom zamjene baterija.
• Disconnected Battery Notification: Upozorava kada baterija nije dostupna za rezervno napajanje.
• Dataline Surge Protection: Provides protection of connected equipment from power surges on the data lines.
• Automatsko samotestiranje: Periodično samotestiranje baterije osigurava rano otkrivanje baterije koju treba zamijeniti.
• Adjustable Voltage-Transfer Points: Maksimizira korisno trajanje baterije proširenjem ulaznog volumenatage window or tightening it to regulate output voltage.
• Adjustable Voltage Osjetljivost: Pruža mogućnost prilagođavanja UPS-a za optimalne performanse u specifičnim energetskim okruženjima ili aplikacijama generatora.
• Zvučni alarmi: Provides notification of changing utility power and UPS power conditions.
• User-Replaceable Batteries: Increases availability by allowing a trained user to perform upgrades and replacements of batteries reducing Mean Time to Repair (MTTR).
• USB povezivanje: Provides management of the UPS via a USB port.
• Serijsko povezivanje: Omogućava upravljanje UPS-om preko serijskog porta.
• Transformer-Block Spaced Outlets: Protects equipment with input transformer blocks without blocking access to other receptacles.
• Boost and Trim Automatic Voltage Regulacija (AVR): Corrects low and high voltages without using the battery, extending battery life.
• Inteligentno upravljanje baterijom: Maksimizira performanse baterije, životni vijek i pouzdanost kroz inteligentno, precizno punjenje.
• Safety-Agency Approved: Osigurava da je proizvod testiran i odobren za siguran rad sa povezanom opremom dobavljača usluga iu navedenom okruženju.
• Indikator kvara ožičenja zgrade: This LED informs users of potentially dangerous wiring problems in the wall circuit.
• Battery Replacement Without Tools: Enables quick, easy battery replacement.
• LCD Graphics Display: Provides clear, concise information with text and mimic diagrams that display modes of operation, system parameters, and alarms.

2. Podešavanje

2.1 Raspakivanje i postavljanje

Carefully unpack the UPS and inspect it for any shipping damage. Place the UPS in a location that is clean, dry, and away from direct sunlight or excessive heat. Ensure adequate ventilation around the unit. The tower form factor allows for vertical placement.

2.2 Priključivanje na napajanje

1. Connect the UPS power cord to a grounded 3-prong outlet. The power cord is approximately 5 feet long, providing flexibility for placement.
2. Allow the UPS to charge for at least 24 hours before connecting critical equipment to ensure full battery capacity.
3. Observe the Building Wiring Fault Indicator. If this LED illuminates, it indicates a potential wiring problem in the wall circuit that should be addressed by a qualified electrician.

2.3 Povezivanje opreme

The UPS features both battery-protected and surge-only outlets.

• Battery-Protected Outlets (NEMA 5-15R): Connect critical equipment such as computers, monitors, and network devices (modems, routers) to these outlets. These outlets provide power during outagi zaštitu od prenapona.
• Surge-Only Outlets (NEMA 5-15R): Connect non-critical equipment like printers, scanners, or desk lamps to these outlets. These outlets provide surge protection but do not offer battery backup during a power failure.

2.4 Data Line Protection

Connect your telephone, network, or coaxial cables through the designated ports on the UPS to protect against surges traveling through these lines.

2.5 USB and Serial Connectivity

For advanced management and monitoring, connect the UPS to your computer using the provided USB or serial cable. Install the appropriate power management software (available from APC's website) to configure settings, monitor power conditions, and perform graceful shutdowns.

2.6 Montaža na zid

The unit can be wall-mounted using the keyhole slots on the back. Ensure the mounting surface is sturdy enough to support the weight of the UPS and that proper fasteners are used.

3. Operacija

3.1 Uključivanje/isključivanje

• To power on the UPS, press the power button located on the front panel.
• To power off the UPS, press and hold the power button until the unit shuts down.

3.2 LCD Graphics Display

The LCD display provides real-time information about the UPS status, including:

• Nivo opterećenja: Označava procenattagkapaciteta UPS-a koji koristi priključena oprema.
• Online status: Prikazuje kada UPS radi na napajanju iz mreže.
• Procijenjeno vrijeme trajanja: Displays the approximate remaining battery runtime in minutes during a power outage.
• AVR Status: Indicates when Automatic Voltage Regulation is actively correcting input voltage bez upotrebe energije baterije.
• Sistemski parametri: Provides details on input/output voltage, frequency, and battery charge level.
• Alarmi: Notifies of critical events or warnings.

3.3 Automatski Voltage Regulacija (AVR)

The Boost and Trim AVR feature automatically corrects minor voltage fluctuations (sags and surges) in incoming utility power without switching to battery power. This preserves battery life and ensures a stable power supply to your connected devices.

3.4 Power Outage Response

Tokom napajanjatage, the UPS automatically switches to battery power, providing uninterrupted power to devices connected to the battery-protected outlets. Audible alarms will sound to notify you of the power event. The estimated run time will be displayed on the LCD.

3.5 Green Mode and Power-Saving Outlets

The Green Mode optimizes efficiency by bypassing internal components when utility power is stable. Power-saving outlets can be configured to automatically turn off connected devices when the master device (e.g., your computer) is turned off or goes into standby, reducing energy consumption.

4. Održavanje

4.1 Briga o bateriji i zamjena

The UPS features user-replaceable and hot-swappable batteries, allowing for replacement without powering down connected equipment.

• Automatsko samotestiranje: The UPS performs periodic self-tests to assess battery health.
• Battery Failure Notification: The UPS will provide an early warning if the battery needs replacement.
• Disconnected Battery Notification: An alarm will sound if the battery is not properly connected.
• Procedura zamjene: Batteries can be replaced without tools. Refer to the specific battery replacement instructions provided with your replacement battery or on the APC support website. Always use genuine APC replacement batteries.

4.2 Resetabilni prekidač

In case of an overload, the UPS's resettable circuit breaker may trip. Disconnect non-essential equipment, then press the circuit breaker button to reset it.

4.3 Čišćenje

Keep the UPS clean and free of dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are not obstructed.

5. Otkrivanje problema

This section provides solutions to common issues you might encounter with your APC Back-UPS RS 700 VA.

6. Specifikacije

• Model: BR700G
• Kapacitet: 700 VA / 450 W
• Ulazni voltage: 120V AC (Nominal)
• Output Voltage: 120V AC (Nominal)
• Izlazne veze: 3 x NEMA 5-15R (Battery Backup & Surge Protection), 3 x NEMA 5-15R (Surge Protection Only)
• Form Faktor: Toranj
• Težina: Otprilike 0.01 unci (Note: This weight is as per provided data. Actual weight for a UPS of this capacity is typically much higher.)
• Amperage: 3 Amps
• Boja: Zeleno (Note: The product image shows a black/dark grey unit, but specifications list 'Green'.)
• Datum prve dostupnosti: 12. septembra 2012
• Proizvođač: APC

7. Garancija

The APC Back-UPS RS 700 VA Tower UPS (Model BR700G) comes with a 1-godišnja garancija proizvođača. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to initiate a warranty claim, please refer to the official APC warranty documentation or contact APC customer support.

8. Podrška

For technical assistance, product information, or to purchase replacement parts and accessories, please contact APC customer support or visit their official website.

• APC Official Webstranica: www.apc.com
• Služba za korisnike: Pogledajte APC webstranica za regionalne kontakt informacije.