RCF NX10-SMA 10-inčni 2-smjerni koaksijalni monitor Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and efficient operation of your RCF NX10-SMA 10-inch 2-Way Coaxial Monitor. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Slika 1: Prednja strana view of the RCF NX10-SMA coaxial monitor, showcasing its protective grille and compact design.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili strujni udar, požar ili ozljede:

• Napajanje: Uređaj priključite samo na navedeni izvor napajanja.tage. Ensure the power cord is undamaged and properly grounded.
• ventilacija: Ne blokirajte ventilacijske otvore. Osigurajte dovoljan protok zraka oko uređaja kako biste spriječili pregrijavanje.
• Vlaga: Do not expose the unit to rain or moisture. Avoid placing liquids on or near the unit.
• servisiranje: Ne pokušavajte sami servisirati ovaj proizvod. Sve servise prepustite kvalificiranom servisnom osoblju.
• plasman: Ensure the unit is placed on a stable surface or securely mounted to prevent it from falling.
• Zaštita sluha: Prolonged exposure to high sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the unit at high volumes.

3. Podešavanje

3.1 Raspakivanje

Carefully remove the RCF NX10-SMA monitor from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.

3.2 Fizički smještaj

The NX10-SMA is designed for versatile placement, commonly used as a stage monitor. Its angled cabinet allows for optimal sound projection towards the performer. Ensure the monitor is placed on a stable, flat surface or securely mounted.

Slika 2: Bočna strana view of the RCF NX10-SMA monitor, illustrating its angled profile pogodno za stage monitoring.

3.3 Veze

Refer to the rear panel for all input and output connections. Ensure all connections are secure before powering on the unit.

• AC ulaz: Connect the provided power cable to the AC INPUT socket.
• AC Link: Use the AC LINK output to daisy-chain power to other compatible RCF units. Do not exceed the maximum current rating.
• Unos: Connect your audio source (e.g., mixer, instrument) to the INPUT XLR connector.
• Link: Use the LINK XLR output to send the audio signal to another NX10-SMA unit or other audio equipment.

Figure 3: Rear panel of the RCF NX10-SMA, detailing the AC input/link, audio input/link, and control knobs.

4. Operativni

4.1 Uključivanje/isključivanje

After all connections are made, switch the power button located on the rear panel to the 'ON' position. To power off, switch the button to 'OFF'. It is recommended to power on your monitors last and power them off first in your audio chain.

4.2 Kontrola jačine zvuka

Adjust the 'VOLUME' knob on the rear panel to set the desired output level. Start with the volume at a low setting and gradually increase it to prevent sudden loud sounds.

4.3 Input Sensitivity/EQ Presets

The NX10-SMA may feature controls for input sensitivity or EQ presets (e.g., 'STAGE', 'MAIN', 'BOOST'). Consult the labels on the rear panel (refer to Figure 3) and adjust these settings according to your application and desired sound profile.

5. Održavanje

5.1 Čišćenje

Clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Ensure no liquids enter the unit.

5.2 Skladištenje

When not in use, store the RCF NX10-SMA in a dry, dust-free environment, away from extreme temperatures. If transporting, use appropriate protective cases.

5.3 Opšta njega

Regularly check cables for wear and tear. Avoid dropping or subjecting the unit to strong impacts.

6. Otkrivanje problema

If you encounter issues with your RCF NX10-SMA, refer to the following common problems and solutions:

• Nema zvuka:
  • Ensure the unit is powered on and the power cable is securely connected.
  • Check that the audio source is active and connected correctly to the INPUT.
  • Verify the 'VOLUME' knob is not set to minimum.
  • Test with a different audio cable.
• izobličeni zvuk:
  • Smanjite ulazni nivo zvuka sa vašeg audio izvora.
  • Lower the 'VOLUME' knob on the monitor.
  • Provjerite ima li oštećenih kablova.
• Jedinica se ne uključuje:
  • Ensure the power cable is fully inserted into both the unit and the power outlet.
  • Provjerite utičnicu s drugim uređajem.
  • Provjerite je li prekidač za napajanje u položaju 'UKLJUČENO'.

If the problem persists after attempting these solutions, contact RCF customer support or a qualified service technician.

7. Specifikacije

The following table outlines the key specifications for the RCF NX10-SMA 10-inch 2-Way Coaxial Monitor:

8. Informacije o garanciji

For detailed warranty information, please refer to the warranty card included with your product or visit the official RCF webstranica. Uslovi i odredbe garancije mogu se razlikovati u zavisnosti od regije i prodavca.

9. Korisnička podrška

If you require technical assistance, have questions about your RCF NX10-SMA, or need to report a service issue, please contact RCF customer support or your authorized RCF dealer. Contact information can typically be found on the RCF official webweb-mjestu ili u dokumentaciji vašeg proizvoda.