Hioki 3030-10 HiTester analogni multimetar - uputstvo za upotrebu

1. Uvod

This manual provides essential instructions for the safe and effective operation of the Hioki 3030-10 HiTester Analog Multimeter. This device is an average-sensing, manual-ranging meter designed for measuring voltage, resistance, and current in various electrical testing applications. Please read this manual thoroughly before use and retain it for future reference.

2. Sigurnosne informacije

To ensure safe operation and prevent damage to the device, observe the following safety precautions:

• The meter is designed to meet International Electrotechnical Commission (IEC) safety standard 61010.
• It is certified for Category III installations up to 600V, suitable for use with enclosed building circuit installations (e.g., service panel parts, branch circuits, fixed installations connected directly to AC power supply).
• A 0.5-amp/250V fuse is installed to protect the operator from electric shock due to transient voltage. Do not bypass or use an incorrect fuse.
• Always select the appropriate measurement range before connecting the test leads to the circuit.
• Ne prekoračujte maksimalne ulazne vrijednosti za bilo koju funkciju.
• Prije svake upotrebe provjerite mjerne kablove da li su oštećeni. Zamijenite ih ako je izolacija oštećena.
• The meter is designed to withstand falls of up to 1 meter onto hardwood or concrete. However, avoid dropping the device.

3. Sadržaj paketa

Provjerite da li su svi elementi prisutni:

• Hioki 3030-10 HiTester Analog Multimeter
• Detachable Test Leads (Red and Black)
• Torbica za nošenje
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview i karakteristike

Slika 1: Hioki 3030-10 HiTester Analog Multimeter. The image displays the multimeter unit, its protective carrying case, and the red and black test leads. The multimeter features a clear analog display with multiple scales for various measurements, a central rotary switch for function and range selection, and input jacks for the test leads.

The Hioki 3030-10 is an analog multimeter designed for reliable electrical measurements. Key features include:

• Analogni ekran: Provides a clear, real-time indication of measurements, useful for observing trends and fluctuations.
• Manual Ranging: Requires the user to select the appropriate measurement range for precision.
• Average-Sensing: Delivers accurate readings for linear loads with undistorted waveforms.
• Funkcije mjerenja: Mjere DC/AC voltage, DC struja i otpor.
• Battery Test Feature: Determines charge level for 1.5V batteries.
• LED Test Function: Allows testing of LED lights.
• Temperature Measurement Capability: Requires a separately sold thermistor probe.
• Usklađenost sa sigurnošću: Meets IEC 61010, CAT III 600V safety standards.
• Izdržljiv dizajn: Engineered to withstand drops up to 1 meter.

5. Podešavanje

5.1 Instalacija baterije

The Hioki 3030-10 requires two AAA batteries for operation. To install or replace batteries:

1. Ensure the multimeter is turned OFF (rotary switch set to 'OFF').
2. Pronađite poklopac odjeljka za baterije na stražnjoj strani uređaja.
3. Open the cover and insert two AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Sigurno zatvorite poklopac odjeljka za baterije.

5.2 Spajanje mjernog kabela

Connect the detachable test leads to the multimeter:

• Umetnite crni mjerni kabel u ulazni priključak "COM" (zajednički).
• Insert the red test lead into the "VΩmA" input jack for voltagmjerenja e, otpora i struje.
• Prije nego što nastavite s bilo kakvim mjerenjima, provjerite jesu li spojevi čvrsti.

6. Uputstvo za upotrebu

The Hioki 3030-10 is a manual-ranging multimeter. Always select the appropriate function and range using the rotary switch before making a measurement.

6.1 DC Voltage mjerenje (V)

1. Podesite rotacijski prekidač na željenu jačinu jednosmjerne struje (DC Vol).tage (V) range (e.g., 0.3V, 3V, 12V, 30V, 120V, 300V, 600V). Start with the highest range if the voltage je nepoznato.
2. Spojite crveni mjerni kabel na pozitivnu (+) stranu strujnog kola, a crni mjerni kabel na negativnu (-) stranu.
3. Pročitajte voltage value from the appropriate DCV scale on the analog display.

6.2 AC Voltage Measurement (~V)

1. Podesite rotacijski prekidač na željenu jačinu AC strujetage (~V) range (e.g., 12V, 30V, 120V, 300V, 600V). Start with the highest range if the voltage je nepoznato.
2. Spojite mjerne kablove preko AC voltažetage izvor.
3. Pročitajte voltage value from the appropriate ACV scale on the analog display.

6.3 DC Current Measurement (A)

Oprez: Uvijek spajajte multimetar serijski s kolom prilikom mjerenja struje. Nikada ga ne spajajte paralelno s voltom.tage izvor.

1. Set the rotary switch to the desired DC Current (A) range (e.g., 60µA, 30mA, 300mA). Start with the highest range if the current is unknown.
2. Break the circuit and connect the multimeter in series, ensuring the current flows through the meter.
3. Read the current value from the appropriate DCA scale on the analog display.

6.4 Mjerenje otpora (Ω)

Oprez: Prije mjerenja otpora provjerite je li strujno kolo bez napona.

1. Set the rotary switch to the desired Resistance (Ω) range (e.g., x1, x10, x100, x1k).
2. Before measuring, short the test leads together and adjust the "Ω ADJ" knob (if present) to zero the meter.
3. Spojite mjerne kablove preko komponente koju treba mjeriti.
4. Read the resistance value from the Ω scale on the analog display and multiply by the selected range multiplier.

6.5 Battery Test (BATT 1.5V)

1. Set the rotary switch to the "BATT 1.5V" position.
2. Connect the red test lead to the positive (+) terminal of the 1.5V battery and the black test lead to the negative (-) terminal.
3. Read the battery charge level from the "BATT" scale on the analog display.

6.6 LED Test (LED)

1. Set the rotary switch to the "LED" position.
2. Connect the test leads to the LED. Observe polarity; if the LED does not light, reverse the leads.
3. A lit LED indicates functionality.

6.7 Mjerenje temperature (TEMP)

This function requires a separately purchased thermistor probe. Refer to the thermistor probe's manual for specific connection and operation instructions.

1. Set the rotary switch to the "TEMP" position.
2. Connect the thermistor probe to the designated input jacks.
3. Read the temperature from the "TEMP(°C)" scale on the analog display.

7. Održavanje

7.1 Čišćenje

Obrišite mjerač casing s mekim, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is off and disconnected from all circuits before cleaning.

7.2 Zamjena osigurača

If the current measurement function ceases to operate, the fuse may need replacement. The Hioki 3030-10 uses a 0.5-amp/250V fuse. Always replace with a fuse of the identical type and rating.

1. Provjerite je li multimetar isključen i da su mjerni kabeli isključeni.
2. Refer to the device's internal diagram (if available) or contact customer support for instructions on accessing the fuse compartment.
3. Carefully remove the old fuse and insert the new 0.5A/250V fuse.
4. Reassemble the meter securely.

7.3 Skladištenje

When not in use, store the multimeter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.

8. Otkrivanje problema

If the multimeter does not function as expected, consider the following:

• Nema ekrana/napajanja: Provjerite jesu li baterije ispravno postavljene i uvjerite se da nisu ispražnjene. Zamijenite ih ako je potrebno.
• Netačna očitanja:
  • Osigurajte da su za mjerenje odabrani ispravna funkcija i raspon.
  • Verify test leads are properly connected and not damaged.
  • For resistance measurements, ensure the circuit is de-energized and the meter is zeroed.
• Current Function Not Working: Check the internal fuse (refer to Section 7.2).
• Igla se ne pomiče: Ensure the meter is powered on and the test leads are making good contact with the circuit. Check for open circuits.

If problems persist after attempting these steps, contact Hioki customer support for further assistance.

9. Specifikacije