KanexPro WALLM-14-BLK-2242 Adjustable Tilt Wall Mount Instruction Manual

Uvod

Thank you for choosing the KanexPro WALLM-14-BLK-2242 Adjustable Tilt Wall Mount. This manual provides essential instructions for safe and proper installation, operation, and maintenance of your wall mount. Please read this manual thoroughly before installation and retain it for future reference. This mount is designed to securely hold compatible LCD and Plasma TVs, offering a variable downward tilt for optimal viewing angles.

Sigurnosne informacije

UPOZORENJE: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. The manufacturer is not liable for damage or injury caused by incorrect assembly or use.

• Ensure the mounting surface can safely support the combined weight of the mount and the display. The maximum weight capacity for this mount is 165 lbs (75 kg).
• This mount is designed for installation on wood studs or solid concrete walls. Do not install on drywall alone.
• Uvijek koristite detektor za drvene letve kako biste locirali središte drvenih letvi.
• Use appropriate mounting hardware for your specific wall type.
• Do not overtighten screws; this may cause damage and reduce holding capacity.
• Držite djecu i kućne ljubimce podalje tokom instalacije.
• Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom profesionalnom instalateru.

Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne i neoštećene. Ako bilo koji dijelovi nedostaju ili su neispravni, obratite se korisničkoj podršci.

• Zidna ploča (1)
• TV nosači (2)
• Komplet montažnog pribora (razni vijci, podloške, odstojnici, tiplovi)
• Integrated Bubble Level (on wall plate)

Postavljanje i instalacija

Potreban alat (nije uključen):

• Olovka
• Odvijač za glavu Phillips
• Električna bušilica
• Alat za pronalaženje stubova (za ugradnju drvenih stubova)
• Tape Measure
• Socket Wrench (for lag bolts)

Korak 1: Priprema zida

1. Determine the desired height for your television. The center of the TV should ideally be at eye level when seated.
2. Za zidove s drvenim stubovima: Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs. The wall plate is designed to span two standard 16-inch or 24-inch on-center studs.
3. For Solid Concrete Walls: Ensure the concrete is solid and free of cracks. Mark the desired drilling locations.

Korak 2: Pričvrstite zidnu ploču na zid

1. Hold the wall plate against the wall at your marked locations. Use the integrated bubble level to ensure it is perfectly horizontal.
2. Označite tačke bušenja kroz rupe na zidnoj ploči.
3. Za zidove s drvenim stubovima: Drill pilot holes (e.g., 7/32" or 5.5mm) into the center of the studs at the marked locations.
4. For Solid Concrete Walls: Drill holes (e.g., 3/8" or 10mm) to the appropriate depth for the concrete anchors. Insert the concrete anchors flush with the wall surface.
5. Align the wall plate with the drilled holes and secure it to the wall using the provided lag bolts and washers. Tighten firmly but do not overtighten.

Image: The KanexPro WALLM-14-BLK-2242 wall mount, showing the main wall plate with integrated level and the two vertical TV brackets attached. This view illustrates the overall structure of the mount.

Korak 3: Pričvrstite nosače za TV na televizor

1. Carefully place your television face down on a soft, clean surface to prevent screen damage.
2. Identify the VESA mounting holes on the back of your TV. This mount supports VESA patterns up to 750 x 450 mm.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Ensure the screws are not too long, which could damage internal components.
4. Attach the two TV brackets to the back of your television. Ensure they are oriented correctly (hooks facing upwards) and are securely fastened.

Image: A technical diagram illustrating the dimensions of the KanexPro WALLM-14-BLK-2242 wall mount and its VESA compatibility range. It shows the minimum and maximum VESA measurements (58-750mm horizontally, 75-450mm vertically) and the wall plate's physical dimensions (32 inches wide x 8 7/8 inches high).

Korak 4: Montirajte televizor na zidnu ploču

1. Uz pomoć, pažljivo podignite televizor pomoću priloženih nosača.
2. Hook the top edges of the TV brackets onto the top rail of the wall plate.
3. Pažljivo spuštajte TV dok nosači potpuno ne sjednu na zidnu ploču.
4. Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Secure these to prevent the TV from accidentally lifting off the mount.
5. Double-check that the TV is securely attached to the wall mount before releasing it.

Operating the Tilt Feature

The KanexPro WALLM-14-BLK-2242 features a variable tilt range of 0° to -15° downward, allowing you to adjust your viewing angle to reduce glare and improve comfort.

1. To adjust the tilt, locate the tilt adjustment knobs or levers on the sides of the TV brackets.
2. Loosen these knobs/levers slightly.
3. Carefully tilt the bottom of your television forward or backward to achieve the desired angle.
4. Once the desired tilt is set, firmly tighten the adjustment knobs/levers to secure the TV in place.

Slika: Perspektiva view of the KanexPro WALLM-14-BLK-2242 wall mount, highlighting the adjustable vertical brackets. This image helps visualize the components involved in the tilt mechanism.

Održavanje

Redovno održavanje osigurava dugotrajnost i sigurnost vašeg zidnog nosača.

• Povremeno provjeravajte sve vijke i šrafove kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
• Dust the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

Rješavanje problema

Ako naiđete na probleme tokom ili nakon instalacije, pogledajte sljedeće uobičajene probleme i rješenja:

• TV nije ravan: Ensure the wall plate was installed level using the integrated bubble level. If not, remove the TV, loosen the wall plate bolts, adjust, and retighten.
• TV feels unstable: Verify all mounting screws (both to the wall and to the TV) are securely tightened. Ensure the safety screws/locking mechanisms on the TV brackets are engaged. Confirm the TV weight does not exceed the mount's capacity.
• Difficulty tilting the TV: Loosen the tilt adjustment knobs/levers on the TV brackets. If they are too tight, the tilt mechanism will be stiff. Ensure no cables are obstructing the movement.
• dijelovi koji nedostaju: Review the 'Package Contents' section. If parts are missing, contact KanexPro customer support.

Specifikacije

Garancija i podrška

For warranty information or technical support, please refer to the documentation included with your purchase or contact KanexPro customer service directly. Keep your purchase receipt as proof of purchase.

Kontakt informacije: Please visit the official KanexPro webstranicu za najnovije kontakt podatke za podršku.