Conair Fabric Shaver and Lint Remover (Model CLS1)

1. Uvod

Thank you for choosing the Conair Fabric Shaver and Lint Remover, Model CLS1. This battery-operated device is designed to safely and effectively remove fuzz, lint, and pills from a wide variety of fabrics, restoring their appearance. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Sigurnosne informacije

Opće sigurnosne mjere:

• Čuvati van domašaja djece.
• Do not use on delicate fabrics that may snag easily. Test on an inconspicuous area first.
• Ensure the shaver is turned off before cleaning or handling the blades.
• Ne potapajte jedinicu u vodu ili druge tečnosti.
• Use only for its intended purpose of fabric defuzzing.

Sigurnost baterije:

• Potrebne su 2 AA baterije (nisu uključene).
• Nemojte miješati stare i nove baterije.
• Nemojte miješati alkalne, standardne (ugljik-cink) ili punjive (nikl-kadmijum) baterije.
• Izvadite baterije ako se uređaj ne koristi duži period.
• Istrošene baterije odložite na odgovarajući način u skladu sa lokalnim propisima.

3. Proizvod je gotovview

The Conair Fabric Shaver is designed for ease of use and effective performance. It features a comfortable ergonomic grip and a large shaving head for efficient coverage.

Figure 1: Conair Fabric Shaver with key components labeled, including the honeycomb mesh design, 2-inch shaving surface, 3-setting distance controller, detachable fuzz collector, easy-grip handle, and battery compartment.

Ključne karakteristike:

• Large 2-inch Shaving Head: For efficient coverage on various fabric surfaces.
• 3 Depth Settings: Adjustable to safely shave fuzz, pilling, and lint from different fabric types.
• Detachable Lint Catcher: For easy cleanup of collected fuzz.
• Ergonomski grip: Provides comfortable handling during use.
• Bežični rad: Battery-operated for portability and convenience.

4. Podešavanje

Instalacija baterije:

1. Pronađite odjeljak za baterije na dnu drške.
2. Twist and remove the battery compartment cover.
3. Umetnite 2 AA baterija, pazeći na ispravan polaritet (+/-) kao što je naznačeno unutar odjeljka.
4. Replace the battery compartment cover and twist to secure.

5. Uputstvo za upotrebu

Adjusting Depth Settings:

The shaver features 3 depth settings to accommodate different fabric types and pilling levels. Rotate the shaving head cover to select the desired setting:

• Setting 1 (Lowest): For delicate fabrics or light pilling.
• Postavka 2 (Srednja): For general use on most fabrics.
• Setting 3 (Highest): For heavy fabrics or stubborn pills.

Figure 2: A hand demonstrates adjusting the 3-setting distance controller on the fabric shaver's head.

Using the Fabric Shaver:

1. Lay the garment or fabric flat on a hard, smooth surface. Ensure the fabric is taut to prevent snagging.
2. Select the appropriate depth setting for your fabric.
3. Pomaknite prekidač za UKLJUČENO/ISKLJUČENO u položaj 'UKLJUČENO'.
4. Gently glide the shaving head over the pilled or fuzzed area. Apply light, even pressure.
5. Move the shaver in circular motions or short, even strokes. Avoid pressing too hard or holding it in one spot for too long.
6. Periodically check the lint catcher and empty it as it fills.
7. Once finished, slide the ON/OFF switch to the 'OFF' position.

Figure 3: The fabric shaver is shown in action, gently gliding over a sweater to remove fuzz and pilling.

Figure 4: A visual comparison showing a sweatshirt with visible pilling (Before) and the same sweatshirt after treatment with the fabric shaver, appearing smooth and renewed (After).

6. Održavanje

Cleaning the Lint Catcher:

For optimal performance, empty the lint catcher regularly.

1. Provjerite je li brijač ISKLJUČEN.
2. Gently slide down the detachable lint catcher located on the handle.
3. Ispraznite sakupljene dlačice i vlakna u kantu za smeće.
4. Slide the lint catcher back into place until it clicks securely.

Njega oštrica:

Oštrice su oštre. Pažljivo rukujte.

• To clean around the blades, carefully remove the shaving head cover by twisting it counter-clockwise.
• Use a small brush (not included) to gently remove any trapped lint or debris from the blades and the inner compartment.
• Do not touch the blades directly with your fingers.
• Replace the shaving head cover by twisting it clockwise until secure.

7. Otkrivanje problema

Uređaj se ne uključuje:

• Provjerite jesu li baterije pravilno umetnute s odgovarajućim polaritetom.
• Zamijenite stare baterije novim AA baterijama.
• Ensure the ON/OFF switch is fully in the 'ON' position.

Poor performance/not removing fuzz:

• Empty the lint catcher if it is full.
• Clean the blades and inner compartment of any trapped lint or debris.
• Ensure the fabric is laid flat and taut.
• Adjust the depth setting to a higher level for thicker fabrics or more stubborn pills.

8. Specifikacije

9. Informacije o garanciji

This item has been built to U.S. electronics specifications. It may require additional modifications or converters to be used in countries other than the U.S. and Canada. For specific warranty details, please refer to the documentation included with your purchase or contact Conair customer support.

10. Korisnička podrška

If you have any questions or require assistance with your Conair Fabric Shaver, please visit the official Conair webweb-stranicu ili kontaktirajte njihovu službu za korisnike. Kontakt informacije se obično mogu pronaći na pakovanju proizvoda ili na službenoj stranici brenda website.