SINGER Simple 2263 23-Stitch Sewing Machine

Uvod

This manual provides essential information for the proper setup, operation, and maintenance of your SINGER Simple 2263 23-Stitch Sewing Machine. Designed for ease of use, this machine offers foundational features for various sewing projects. Please read these instructions carefully before using the machine to ensure safe and efficient operation.

Figure 1: SINGER Simple 2263 23-Stitch Sewing Machine. This image displays the full sewing machine with its main components visible, including the stitch selector, tension dial, and needle area.

Važna sigurnosna uputstva

• Always unplug the sewing machine from the electrical outlet immediately after using and before cleaning, removing covers, or performing any user servicing.
• Do not allow the machine to be used as a toy. Close attention is necessary when the machine is used by or near children.
• Use this machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer.
• Nikada nemojte rukovati ovom šivaćom mašinom ako ima oštećen kabel ili utikač, ako ne radi kako treba, ako je pala ili oštećena, ili pala u vodu.
• Držite prste dalje od svih pokretnih dijelova. Potrebna je posebna pažnja oko igle šivaće mašine.
• Uvijek koristite odgovarajuću pločicu za iglu. Pogrešna ploča može uzrokovati lomljenje igle.
• Ne vucite niti gurajte tkaninu tokom šivenja. To može skrenuti iglu i uzrokovati njen lom.
• Nosite zaštitne naočare kada rukujete mašinom.

Šta je u kutiji

Prilikom raspakivanja, molimo Vas da provjerite da li su uključene sve sljedeće stavke:

• Uputstvo za upotrebu
• Vodič za brzi početak
• Darning Plate
• Thread Spool Cap Holders (2)
• Odvijač
• Višenamjensko stopalo
• Buttonhole Foot
• Noga za šivanje dugmeta
• bobine (3)
• igle (3)
• Lint Brush/Seam Ripper
• Power cord/Foot Control

Figure 2: Included Accessories. This image displays various accessories that come with the sewing machine, including bobbins, needles, different presser feet, and a seam ripper.

Setup

1. Priključak za napajanje

Connect the power cord to the machine and then to a 110-volt electrical outlet. Ensure the foot control is also connected to the machine.

2. Uvlačenje konca u mašinu

Pravilno uvlačenje konca je ključno za optimalnu kvalitetu šava. Slijedite ove korake:

1. Place a spool of thread onto the spool pin. Ensure the thread unwinds smoothly.

Figure 3: Spool Pin. This image shows a close-up of the spool pin located at the top of the machine, where the thread spool is placed.

2. Guide the thread through the upper thread guides and tension discs as indicated by the numbered path on the machine.
3. Thread the needle from front to back. The automatic needle threader can assist with this step.

Figure 4: Needle Area. This image provides a close-up view of the needle and presser foot area, highlighting the automatic needle threader mechanism.

3. Namotavanje i umetanje kalema

Refer to the Quick Start Guide for detailed instructions on winding the bobbin and correctly inserting it into the bobbin case.

Uputstvo za upotrebu

1. Odabir boda

Turn the stitch selector dial to choose from the 23 available stitch patterns. Ensure the needle is in its highest position before changing stitches.

2. Podešavanje dužine i širine boda

Use the length and width dials to fine-tune your chosen stitch. Experiment with different settings on scrap fabric to achieve the desired result.

3. Using the Presser Foot Lifter

The extra-high presser foot lifter allows for easy placement and removal of multiple layers of fabric or bulky materials under the presser foot.

4. Sewing a Buttonhole

Attach the buttonhole foot. Follow the markings on the foot and the machine's instructions for a four-step buttonhole process.

Figure 5: Buttonhole Stitching. This image shows the buttonhole presser foot attached to the machine, actively stitching a buttonhole on a piece of blue fabric.

Održavanje

1. Čišćenje mašine

Regular cleaning helps maintain machine performance. Use the provided lint brush to remove lint and dust from the bobbin area and feed dogs. Always unplug the machine before cleaning.

2. Zamjena igle

Replace the needle regularly, especially if it becomes bent, dull, or if you notice skipped stitches. Use the screwdriver to loosen the needle clamp screw, insert a new needle with the flat side facing the back, and tighten the screw.

Rješavanje problema

If you encounter issues, review sljedeći uobičajeni problemi i rješenja:

• Preskočeni šavovi: Check if the needle is bent or dull, replace if necessary. Ensure the needle is inserted correctly. Verify the machine is threaded properly.
• Prekidanje niti: Check for correct threading, proper thread tension, and ensure the needle is not bent or too small for the thread.
• Nabiranje tkanine: Adjust thread tension, use a finer needle, or consider using a stabilizer for delicate fabrics.
• Mašina se ne pokreće: Ensure the power cord and foot control are securely plugged in. Check the power switch.

For more complex issues, consult the full instruction manual or contact SINGER customer support.

Specifikacije

Garancija i podrška

This sewing machine is warranted for use in the US and Canada at 110 volts only. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official SINGER website.

For technical support, replacement parts, or further assistance, please contact SINGER customer service through their official channels.