Uvod
The Meliconi CME ETR200 is a slim tilt wall bracket designed for televisions ranging from 26 to 40 inches (66 to 102 cm). This bracket supports VESA mounting patterns up to 200x200 mm and 200x100 mm, offering both vertical tilt and horizontal rotation for optimal viewing angles. Manufactured in Italy, the ETR200 is TÜV certified, ensuring safety and quality with a tested maximum load capacity of 30 kg (66 lbs) and a safety factor of three times the weight.
This manual provides detailed instructions for the safe and correct installation, operation, and maintenance of your Meliconi CME ETR200 wall bracket.
Slika: Front view of the Meliconi CME ETR200 Slim Tilt Wall Bracket.
Ključne karakteristike
- Kompatibilnost TV veličine: Suitable for 26 - 40 inch (66 - 102 cm) televisions.
- Maksimalni kapacitet: Podržava do 30 kg (66 funte).
- Horizontalna rotacija: Adjustable up to ±15 degrees.
- Vertikalni nagib: Adjustable from -5 to +15 degrees.
- VESA kompatibilnost: Supports VESA 200 and 200x100 mm mounting patterns.
- Osiguranje kvaliteta: TÜV certified for safety and durability.
- Porijeklo: Proizvedeno u Italiji.
Sadržaj paketa
Molimo Vas da provjerite da li su sve komponente prisutne prije početka instalacije.
- 1 x Meliconi CME ETR200 TV Wall Bracket
- Installation Hardware (screws, anchors, washers - specific types and quantities may vary, refer to included hardware bag)
- Uputstvo za upotrebu (ovaj dokument)
Image: The Meliconi CME ETR200 product box, showing the bracket and key features.
Postavljanje i instalacija
Važne informacije o sigurnosti:
- Read all instructions carefully before installation. If you have any doubts, consult a qualified professional.
- Ensure the wall structure can safely support the combined weight of the bracket and your television.
- Koristite odgovarajući alat i sigurnosnu opremu tokom instalacije.
- Ne prekoračujte maksimalnu nosivost od 30 kg (66 lbs).
1. Check VESA Compatibility
Before installation, verify that your television's VESA mounting pattern is compatible with the ETR200 bracket. This bracket supports VESA 200x200 mm and 200x100 mm patterns.
Image: Diagram illustrating VESA mounting hole patterns (50, 75, 100, 200 mm) supported by the bracket.
2. Prepare the Wall and Bracket
- Determine the desired mounting height for your television.
- Mark the drilling points on the wall using the bracket as a template. Ensure the bracket is level.
- Drill pilot holes at the marked locations. Use a drill bit appropriate for your wall type and the provided wall anchors.
- Umetnite zidne tiple (ako su potrebne za vaš tip zida) u izbušene rupe.
Image: The Meliconi CME ETR200 wall bracket securely mounted on a wall.
3. Attach Bracket to Wall
- Align the bracket with the drilled holes and secure it to the wall using the appropriate screws and washers. Tighten all screws firmly, but do not overtighten.
4. Attach TV to Bracket
- Carefully lift your television and align the VESA mounting holes on the back of the TV with the corresponding holes on the bracket.
- Secure the television to the bracket using the appropriate screws and washers. Ensure the TV is securely fastened to prevent accidental detachment.
Image: A television mounted on the Meliconi CME ETR200 wall bracket, demonstrating its tilt capability.
Uputstvo za upotrebu
The Meliconi CME ETR200 bracket allows for flexible adjustment of your television's viewing kut.
Podešavanje nagiba
The bracket allows for vertical tilt adjustments from -5 degrees (downward) to +15 degrees (upward). To adjust the tilt:
- Gently grasp the top and bottom edges of your television.
- Carefully push or pull the television to achieve the desired vertical angle. The bracket's mechanism will hold the TV in place once released.
Adjusting Rotation (Swivel)
The bracket allows for horizontal rotation (swivel) of up to ±15 degrees. To adjust the rotation:
- Gently grasp the sides of your television.
- Carefully pivot the television left or right to achieve the desired horizontal viewing angle. The bracket will maintain its position.
Image: Diagram showing the tilt (-5 to +20 degrees) and rotation (±15 degrees) capabilities of the bracket.
Note: The diagram indicates a tilt range of -5 to +20 degrees, while the feature bullets state -5 to +15 degrees. Please adhere to the +15 degree upward tilt for optimal safety and product longevity.
Održavanje
Regular maintenance helps ensure the longevity and safe operation of your wall bracket.
- čišćenje: Wipe the bracket with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Provjerite veze: Periodically check all screws and bolts to ensure they remain tight. Loose connections can compromise safety.
- Pregledajte ima li oštećenja: Regularly inspect the bracket for any signs of wear, corrosion, or damage. If any damage is observed, discontinue use and contact customer support.
Rješavanje problema
If you encounter issues with your Meliconi CME ETR200 wall bracket, please refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| TV nije ravan nakon instalacije. | Bracket not level during wall mounting. | Remove TV, loosen wall mounting screws slightly, adjust bracket with a level, then re-tighten screws. Re-mount TV. |
| TV se čini nestabilnim ili klimavim. | Screws not fully tightened; incorrect wall anchors; wall structure not strong enough. | Ensure all screws are securely tightened. Verify wall anchors are appropriate for your wall type. If the wall is insufficient, consult a professional. |
| Difficulty adjusting tilt or rotation. | Mechanism is stiff; TV weight is at maximum capacity. | Apply gentle, even pressure. Ensure the TV weight does not exceed 30 kg. The mechanism should move smoothly. |
If these solutions do not resolve the issue, please contact Meliconi customer support.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | ETR200 (580412 BC1) |
| Brand | Meliconi |
| Kompatibilnost veličine televizora | 26 - 40 inča (66 - 102 cm) |
| Maksimalni kapacitet opterećenja | 30 kg (66 lbs) |
| VESA kompatibilnost | 200x200 mm, 200x100 mm |
| Horizontalna rotacija | ±15 stepeni |
| Vertical Tilt | -5 do + 15 stupnjeva |
| Vrsta montaže | Zidni nosač |
| Materijal | Metal |
| Boja | Crna |
| Dimenzije proizvoda | 8.66 x 8.66 x 3.43 inča (22 x 22 x 8.7 cm) |
| Težina artikla | 2.4 funte (1.09 kg) |
| Proizvođač | Meliconi |
| Datum prve dostupnosti | 29. avgusta 2012 |
| Globalni trgovački identifikacioni broj (GTIN) | 08006023133543 |
Informacije o garanciji
Meliconi products are designed for durability and safety. The CME ETR200 wall bracket is TÜV certified, confirming its adherence to high safety and quality standards, with a tested maximum load capacity and a significant safety factor.
This product is manufactured in Italy, reflecting a commitment to quality craftsmanship. EU spare part availability is guaranteed for 5 years.
Image: Logos indicating "Made in Italy" and "Fischer" (likely for included wall anchors).
For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Meliconi customer support.
Korisnička podrška
For technical assistance, product inquiries, or support, please contact Meliconi directly:
- Email: info@meliconi.com
- Telefon: +39 051 68211
Slika: Kontakt podaci tehničke podrške kompanije Meliconi, uključujući e-mail adresu i broj telefona.
Our support team is available to assist you with any questions regarding your Meliconi CME ETR200 wall bracket.
