KOAMTAC 674500

KOAMTAC KDC20/100/200 190mAh baterija - uputstvo za upotrebu

Model: 674500

Uvod

This manual provides essential information for the proper use, maintenance, and troubleshooting of your KOAMTAC KDC20/100/200 190mAh replacement battery. This battery is designed to provide reliable power for your KDC20, KDC100, and KDC200 series devices. For optimal performance, it is recommended to replace your KDC battery annually.

Sigurnosne informacije

Please read and understand all safety precautions before using the battery. Improper handling can lead to damage, injury, or fire.

KDC20/100/200 190mAh battery installed in a device, showing a caution label for laser radiation.

Image: The KDC20/100/200 190mAh battery installed in a compatible device. Note the caution label on the device indicating "LASER RADIATION - DO NOT STARE INTO BEAM" for devices with laser components. This image highlights the proper placement of the battery within the device's battery compartment.

Postavljanje: Ugradnja baterije

Follow these steps to properly install the 190mAh battery into your KDC20, KDC100, or KDC200 series device.

  1. Ensure your KDC device is powered off before beginning the installation.
  2. Locate the battery compartment on the back of your KDC device.
  3. If an old battery is present, carefully remove it.
  4. Align the new 190mAh battery with the battery compartment, ensuring the connector pins on the battery match the receptacle in the device.
  5. Gently push the battery into place until it is securely seated and the connector is fully engaged.
  6. Close the battery compartment cover, if applicable, ensuring it latches securely.
KOAMTAC KDC20/100/200 190mAh replacement battery with connector.

Image: The KOAMTAC KDC20/100/200 190mAh replacement battery. This image shows the compact blue battery pack with its small white connector and red and black wires, ready for installation into a compatible KDC device.

Rad: Punjenje i korištenje

Once installed, the battery will power your KDC device. Follow these guidelines for charging and optimal usage.

Punjenje baterije

Upotreba baterije

Održavanje

Proper maintenance can extend the lifespan of your battery.

Rješavanje problema

Ako imate problema s baterijom, razmotrite sljedeća uobičajena rješenja:

ProblemMogući uzrokRješenje
Device does not power on after battery installation.Battery not properly seated or not charged.Ensure battery is fully inserted. Charge the device for at least 30 minutes.
Baterija se brzo prazni.Aging battery, heavy device usage, or environmental factors.Reduce device usage intensity. Consider replacing the battery if it's old (recommended annually). Ensure device firmware is up to date.
Baterija se ne puni.Faulty charger/cable, dirty contacts, or damaged battery.Try a different charger/cable. Clean battery and device contacts. If problem persists, the battery may need replacement.

If troubleshooting steps do not resolve the issue, please contact KOAMTAC customer support.

Specifikacije

FeatureDetalj
Broj modela674500
Kapacitet baterije190 mAh
Voltage3.7 Volts
Sastav baterije baterijeZapečaćena olovna kiselina
Dimenzije proizvoda2 x 2 x 1 inča
Težina artikla8 unce
ProizvođačKOAMTAC

Informacije o garanciji

KOAMTAC provides a limited warranty for its products. For specific warranty terms and conditions applicable to the KDC20/100/200 190mAh battery, please refer to the official KOAMTAC webweb-mjesto ili direktno kontaktirajte njihovu korisničku podršku. Sačuvajte dokaz o kupovini za slučaj reklamacije.

Korisnička podrška

For further assistance, technical support, or inquiries regarding your KOAMTAC KDC20/100/200 190mAh battery, please contact KOAMTAC customer support through their official channels.

Povezani dokumenti - 674500

Preview Vodič za ugradnju, njegu i održavanje drvenih panela Interbuild
Comprehensive guide from Interbuild on how to properly store, install, care for, and maintain wood panels, butcher block countertops, desktops, and vanity tops. Includes essential information on acclimatization, oiling, expansion gaps, and repair.
Preview KOAMTAC KDC80 Mini vodič: Podešavanje i rad Bluetooth skenera barkodova
Sažet vodič za postavljanje i korištenje KOAMTAC KDC80 Bluetooth skenera barkodova, koji pokriva uključivanje/isključivanje, Bluetooth uparivanje, osnovne operacije i tehničke specifikacije.
Preview KOAMTAC SKX7Pro SmartSled mini vodič
Sažet vodič za KOAMTAC SKX7Pro SmartSled, koji pokriva njegove karakteristike, osnovno rukovanje, opcije povezivanja, integraciju softvera i dostupnu dodatnu opremu. Naučite kako uključiti/isključiti uređaj, povezati se putem USB-a i koristiti KTSync SKX i KOAMTACON softver.
Preview KOAMTAC KDC200 Kratki vodič: Podešavanje i korištenje
Kratki vodič za postavljanje i korištenje KOAMTAC KDC200 Bluetooth skenera barkodova, koji obuhvata predstavljanje proizvoda, Bluetooth uparivanje, načine korištenja (HID tastatura, KTSync za Android/iOS) i tehničke specifikacije.
Preview KOAMTAC KDC UHF Tag Vodič za čitanje/pisanje demo programa
Ovaj vodič pruža detaljna uputstva za korištenje KOAMTAC KDC UHF uređaja. Saznajte kako instalirati demo aplikaciju, povezati KDC sa pametnim uređajima putem Bluetootha, čitati i pisati UHF tag podaci, upravljanje tag security (lock/kill), configure UHF settings, and utilize the SDK API. It covers essential operations for efficient RFID tag menadžment.
Preview KOAMTAC KDC20 Mini vodič: Podešavanje i rad Bluetooth skenera barkodova
Sažet vodič za KOAMTAC KDC20 Bluetooth skener barkodova, koji obuhvata podešavanje, uključivanje/isključivanje, osnovne operacije, Bluetooth profiles, uparivanje, funkcionalnost klina tastature, KTSync, KOAMTACON i tehničke specifikacije.