TELEVES 5363

Televes 5363 Multiband AmpKorisnički priručnik za lifier

Model: 5363 | Brand: TELEVES

1. Uvod

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Ključne karakteristike:

Televes 5363 Multiband AmpLifier, zadnji view showing multiple F-connectors for inputs and outputs.

Slika 1: Pozadi view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Sigurnosne informacije

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

4. Postavljanje i instalacija

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Montiranje Amplifier

  1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
  2. Mark the positions for the mounting screws on the wall or surface.
  3. Drill pilot holes if necessary and insert wall plugs.
  4. Osigurajte amplifier using appropriate screws.

4.2. Connecting Signals

The amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Close-up of the Televes 5363 amplifier inputs, showing SAT, UHF, and VHF connections and switches.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amplifier.

  1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
  2. SAT Input: Connect your satellite dish signal cable to the designated SAT input.
  3. Izlaz: Povežite izlaz amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Priključak za napajanje

Priključite kabl za napajanje na amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Front view of the Televes 5363 amplifier showing the power input and general casing.

Slika 3: Prednja strana view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Operacija

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

The amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Podešavanje pojačanja

The amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Održavanje

To ensure optimal performance and longevity of your Televes 5363 Multiband Ampspašivač, slijedite ove jednostavne smjernice za održavanje:

7. Otkrivanje problema

If you encounter issues with your Televes 5363 Multiband Ampspasilac, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after attempting these solutions, contact qualified technical support.

8. Tehničke specifikacije

FeatureSpecifikacija
Broj modela5363
ProizvođačTeleves
MaterijalZamac
Broj ulaza2 (VHF/UHF, SAT)
Output Level (Vs)124 dBuV
Gain (SAT)45 dB
Frekvencijski opsegUp to 2150 MHz (FI)
Vrsta montažePovršinska montaža
Dimenzije (D x Š x V)180 x 110 x 55 mm
Težina proizvoda950 g
NapajanjeSwitched-mode power supply (internal)
Baterije su potrebnebr

9. Garancija i podrška

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes website.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes website.

Povezani dokumenti - 5363

Preview Televizor MiniKom F VHF/UHF-FI Ampspašivač - Tehničke specifikacije i karakteristike
Detaljne informacije o širokopojasnom Televes MiniKom F ampspašivač, uključujući tehničke specifikacije, karakteristike i primjenu npr.amples za SMATV sisteme. Pokriva VHF/UHF i SAT opseg amplifikacija.
Preview Televes AVANT X 532180 Programmable Multiband Amplifier - Tehničke specifikacije
Detailed technical specifications, features, and connectivity of the Televes AVANT X 532180 programmable multiband amplifier for terrestrial TV signals. Includes information on digital filtering, LTE compatibility, and input/output parameters.
Preview Televes AVANT 12 SAT Programabilni višepojasni Amplifier
Televes AVANT 12 SAT je programabilni višepojasni amplifier for terrestrial and satellite signals. It features 32 digital filters, Bluetooth connectivity for programming via the ASuite app, and advanced functionalities for signal management and distribution.
Preview Televes Nanokom Mast Ampspašivač i PicoKom komplet za napajanje
Detaljne informacije o jarbolu Televes Nanokom amplifier (Ref. 561621) i PicoKom napajanje (Ref. 5796), uključujući karakteristike, specifikacije i upute za instalaciju zemaljskih i satelitskih TV signala.
Preview Televes EUROswitch 9x Satellite Multiswitch and AmpKorisnički priručnik za lifier
Comprehensive user manual and technical guide for the Televes EUROswitch 9x series, covering satellite multiswitches and amplifiers. Details installation, safety, features, ECO system, and model specifications.
Preview Televes DTKom Series 451280/451281 Broadband Indoor Distribution Amplifier Datasheet
Detailed datasheet for Televes DTKom Series broadband indoor distribution amplifiers (models 451280 and 451281). Features include technical specifications, block diagram, application examples, safety instructions, and warranty information for CATV, SMATV, and MATV systems.