Eaton TR7740W-K

Eaton TR7740W-K Combination USB Charger Receptacle User Manual

Model: TR7740W-K | Brand: Eaton

1. Proizvod je gotovview

The Eaton TR7740W-K is a combination USB charger and tamper-resistant AC receptacle designed for convenient charging of electronic devices and safe power access. This device integrates two USB charging ports and a standard 125V AC outlet into a single unit, eliminating the need for bulky adapters.

Ključne karakteristike uključuju:

  • Dual USB ports for charging most electronic devices.
  • Energy-efficient design compared to traditional plug-in adapters.
  • LED indicator light to show charging status; turns off upon full charge.
  • 15A 125V tamper-resistant AC receptacle, compliant with 2011 NEC Article 406.12 for child safety.
  • UL approved tamper-resistant shutters prevent insertion of foreign objects.
  • Backwire clamps on side terminals for easy installation with #12 and #14 AWG wire.
  • Designed to replace existing standard duplex receptacles.

2. Sigurnosne informacije

UPOZORENJE: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with national and local electrical codes.

  • Uvijek isključite napajanje prije instalacije ili servisiranja.
  • Use only with copper wire. Do not use with aluminum wire.
  • Uvjerite se da su sve žičane veze sigurne.
  • Ovaj uređaj je samo za upotrebu u zatvorenom prostoru.
  • Ne prekoračujte maksimalne električne nazivne vrijednosti uređaja.
  • Ako niste sigurni u bilo koji dio ovih uputa, obratite se kvalificiranom električaru.

Upozorenje o Prijedlogu 65: Ovaj proizvod može sadržavati hemikalije za koje je država Kalifornija utvrdila da uzrokuju rak i urođene mane ili druge reproduktivne štete.

3. Sadržaj paketa

  • Eaton TR7740W-K Combination USB Charger Receptacle (White)
  • (3) Pre-stripped 6-inch wire leads
  • Pribor za montažu (vijci)

4. Postavljanje i instalacija

Installation should be performed by a qualified individual. Follow these steps carefully:

  1. Isključite napajanje: Locate the circuit breaker or fuse box controlling the outlet where you intend to install the receptacle. Turn off the power to that circuit. Verify power is off using a voltage tester.
  2. Uklonite staru posudu: Unscrew and carefully pull the existing receptacle from the wall box. Disconnect the wires from the old receptacle. Note the wire connections: typically, black (hot), white (neutral), and bare copper or green (ground).
  3. Pripremite žice: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The TR7740W-K includes pre-stripped wire leads for convenience.
  4. Žične veze:
    • Povežite zelena ili gola bakrena žica za uzemljenje from the wall box to the green ground screw on the new receptacle.
    • Povežite bijela (neutralna) žica from the wall box to the silver screw terminal or the white pre-stripped wire lead on the new receptacle.
    • Povežite crna (vruća) žica from the wall box to the brass screw terminal or the black pre-stripped wire lead on the new receptacle.
    • For backwire clamps, insert the stripped wire end fully into the clamp opening and tighten the screw firmly.
  5. Mount Receptacle: Carefully push the wired receptacle back into the wall box. Secure it with the mounting screws provided.
  6. Instalirajte zidnu ploču: Attach the decorative wallplate (not included) over the receptacle.
  7. Vrati snagu: Ponovo uključite napajanje na prekidaču ili kutiji s osiguračima.
Front view of the Eaton TR7740W-K combination USB charger and AC receptacle, showing two USB ports and one tamper-resistant AC outlet.

Slika 1: Prednja strana view of the Eaton TR7740W-K, highlighting the USB ports and AC outlet.

Side view of the Eaton TR7740W-K combination USB charger and AC receptacle, showing wiring terminals and product labels.

Slika 2: Bočna strana view of the Eaton TR7740W-K, illustrating the wiring terminals for installation.

5. Uputstvo za upotrebu

Using your Eaton TR7740W-K combination receptacle is straightforward:

  • USB punjenje: Insert your device's USB charging cable into one of the two USB ports. The LED indicator light will glow to confirm that the device is charging. The light will turn off when the device reaches a full charge.
  • AC napajanje: Plug any standard 125V AC appliance or charger into the tamper-resistant AC outlet. The tamper-resistant shutters require simultaneous pressure on both slots to open, preventing single-object insertion for enhanced safety.

The USB ports provide a total output of 0.7A (700mA) at 5V DC. While suitable for most smartphones and smaller electronic devices, some high-current devices like certain tablets (e.g., older iPads) may charge slower or not at full speed due to their higher power requirements.

6. Održavanje

The Eaton TR7740W-K requires minimal maintenance:

  • čišćenje: Disconnect power before cleaning. Wipe the surface with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
  • inspekcija: Periodically inspect the receptacle for any signs of damage, loose connections, or discoloration. If any issues are found, turn off power and consult a qualified electrician for repair or replacement.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
No power to AC outlet or USB ports.Circuit breaker tripped or fuse blown. Loose wiring connection.Check and reset the circuit breaker or replace the fuse. Turn off power and check wire connections.
USB device not charging or charging slowly.Device requires higher current than supplied (0.7A total). Faulty USB cable. Device not properly connected.Verify device's charging requirements. Use a different USB cable. Ensure cable is fully inserted. Note that some high-power devices may charge slower.
LED indicator not glowing when charging.Device is fully charged. Faulty LED.Check if the device is already fully charged. If not, and the device is charging, the LED may be faulty (does not affect charging function).
Difficulty inserting plug into AC outlet.Tamper-resistant shutters engaged.Apply firm, even pressure to both prongs of the plug simultaneously to engage the shutters. Do not force.

8. Specifikacije

FeatureDetalj
Broj modelaTR7740W-K
BrandEaton
AC Receptacle Rating15A, 125V AC
USB izlaz5V DC, 0.7A (700mA) total
Ožičenje2-Pole, 3-Wire Grounding
BojaBijelo
MaterijalBakar
CertifikatiUL Listed, NEMA
Dimenzije proizvodaApproximately 9.01 x 4.4 x 6.61 inches (overall package) / 1.9 x 3.8 x 5.9 inches (device)
Težina artikla4.2 unce

9. Garancija i podrška

For warranty information and technical support, please refer to the official Eaton website or contact Eaton customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Eaton Customer Service: Molimo posjetite www.eaton.com for contact details and further product information.

Povezani dokumenti - TR7740W-K

Preview Eaton FLEXTRAY™ žičana korpa: Katalog proizvoda i vodič za instalaciju
Sveobuhvatan katalog s detaljima o Eatonovom sistemu žičanih korpi FLEXTRAY™ serije B, uključujući karakteristike, tehničke specifikacije, dijagrame opterećenja, pribor i upute za instalaciju za industrijske primjene i primjene u podatkovnim centrima.
Preview Vodič za instalaciju i testiranje AFCI-ja za odvojni krug Eaton Outlet Grange
Sveobuhvatni vodič za instaliranje i testiranje Eatonove AFCI utičnice za odvojno strujno kolo, uključujući sigurnosne mjere opreza, upute za ožičenje, postupke testiranja, rješavanje problema i informacije o garanciji.
Preview Eatonov vodič za instalaciju i testiranje GFCI utičnica
Sveobuhvatni vodič kompanije Eaton koji detaljno opisuje postupke sigurne instalacije i testiranja za prekidače strujnog kruga uzemljenja (GFCI), uključujući upute za ožičenje, sigurnosne mjere opreza i savjete za rješavanje problema.
Preview Arc Flash Safety eGuide: Understanding and Mitigating Electrical Hazards
This eGuide from Eaton and Consulting-Specifying Engineer provides comprehensive insights into arc flash safety, covering hazard analysis, prevention strategies, mitigation techniques, regulatory compliance, and best practices for electrical systems.
Preview Indeksna lista tehničkih publikacija Eaton Aerospace Master
Sveobuhvatan indeks tehničkih publikacija za Eaton Aerospace proizvode, s detaljnim opisom brojeva dijelova, brojeva modela, vrsta dokumenata, datuma izdavanja, platformi aviona i proizvodnih lokacija. Ova lista služi kao ključni resurs za održavanje i servisiranje komponenti za vazduhoplovstvo.
Preview Eaton EMR6-R400-A-2 relej za nadzor izolacije - Tehnički list
Comprehensive technical datasheet for the Eaton EMR6-R400-A-2 insulation monitoring relay, detailing its functions, operating principles, technical specifications, DIP switch settings, electrical connections, and function/wiring diagrams for IT AC and DC systems.