1. Uvod
This manual provides detailed instructions for the proper use, setup, and maintenance of your EMACHINE Laser Barcode Scanner, model IDATA LS-6030U. This device is designed for fast and simple barcode reading across a wide variety of applications, featuring an ergonomic design for enhanced handling and a rubber coating for high protection.
2. Sadržaj paketa
Molimo Vas da pažljivo provjerite sadržaj paketa. Ako bilo koji artikl nedostaje ili je oštećen, odmah se obratite prodavaču.
- Laserski skener barkoda
- USB Cable (1.8 meters)
- Korisnički priručnik (ovaj dokument)
3. Značajke proizvoda
The EMACHINE Laser Barcode Scanner offers robust performance and user-friendly features:
- Izvor svjetlosti: 650 nm (+10/-5 nm) Laser Diode, 1mW (peak)
- Dubina polja: (4 mils) 400 mm
- Brzina skeniranja: 100 skeniranja/sek
- rezolucija: 0.1 mm (4mils) - Code 39
- Kontrast štampe: 45% ili više
- Ugao skeniranja: 38°
- Indikatori: Green/Red LED & audio signal
- Interfejs: USB
- Podržane simbolologije: Code 128, Codabar, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5, UPC-A, UPC-E, EAN-13, EAN-8, MSI, PLESSEY, Code 11, Code 39, Code 32, Code 93
- Ergonomski dizajn za udobno rukovanje.
- Durable rubber and ABS plastic construction for protection.
- No moving parts inside for enhanced durability.
- Lako programibilno.
4. Upute za postavljanje
Slijedite ove korake za postavljanje skenera barkodova:
- Povežite USB kabl: Locate the USB cable provided in the package. Insert the smaller end of the USB cable into the port at the base of the barcode scanner handle.
- Povežite se na računar: Insert the standard USB-A end of the cable into an available USB port on your computer or point-of-sale (POS) system.
- Instalacija drajvera (automatska): The scanner is typically plug-and-play. Your operating system should automatically detect the device and install the necessary drivers. Wait for the installation to complete, which is usually indicated by a notification.
- Testna veza: Open a text editor (like Notepad or Word) or any application where you want to input scanned data. Point the scanner at a known barcode (e.g., from a book or product) and press the trigger button. The scanner should emit a laser beam and an audible beep upon successful scan. The barcode data should appear in your open application.
Figure 4.1: Barcode scanner in use, demonstrating the scanning process.
5. Uputstvo za upotrebu
Operating the EMACHINE Laser Barcode Scanner is straightforward:
- Uključeno: The scanner receives power directly from the USB connection. Once connected to a powered USB port, it is ready for operation.
- Ciljanje: Hold the scanner comfortably in your hand. Point the scanning window towards the barcode you wish to read. Ensure the laser beam covers the entire barcode.
- Skeniranje: Press and hold the trigger button located on the handle. A red laser line will project from the scanning window.
- Uspješno skeniranje: Upon a successful read, the scanner will emit an audible beep, and the LED indicator will flash green. The scanned data will be transmitted to your connected computer or POS system, appearing in the active input field.
- Unsuccessful Scan: If the scanner does not beep or the LED does not flash green, reposition the scanner, adjust the distance, or try scanning from a different angle. Ensure the barcode is not damaged or obscured.
Slika 5.1: Prednja strana view of the barcode scanner.
Slika 5.2: Bočna strana view of the barcode scanner, showing its profile.
6. Specifikacije
Detailed technical specifications for the EMACHINE Laser Barcode Scanner:
6.1. Električne karakteristike
- Ulazni voltage: 5 VDC ± 0.5V
- Trenutna potrošnja: 60mA maksimalno
- Certifikati: FCC Class B, CE, IEC60825 Class II, CDRH: Class II
6.2. Fizičke karakteristike
- Dimenzije (L * W * H): 90 x 60 x 160 mm
- Težina: 110 g ± 5 g (without cable)
- Materijal: Rubber & ABS plastic
- Radna temperatura: 0° do 50° C
- Temperatura skladištenja: -20° do 60° C
- Radna vlažnost: 10% do 85% bez kondenzacije
- Vlažnost skladištenja: 5% do 95% bez kondenzacije
- Otpornost na ambijentalno svjetlo: Sunlight up to 36000 Lux
- Otpornost na pad: 1.5m pad
6.3. Reading Performance (Based on Code 39 label PCS=0.9 and 600 lux illumination, tolerance ± 1cm)
- 4 mils: 60 ~ 90 mm
- 5 mils: 55 ~ 120 mm
- 13 mils: 45 ~ 200 mm
- 20 mils: 45 ~ 300 mm
- 40 mils: 65 ~ 400 mm
7. Održavanje
Pravilno održavanje osigurava dugotrajnost i optimalne performanse vašeg skenera barkodova:
- čišćenje: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn smudges, dampen the cloth slightly with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they can scratch the window and impair scanning performance.
- Skladištenje: Kada se ne koristi, skener čuvajte na čistom i suhom mjestu, dalje od direktne sunčeve svjetlosti, ekstremnih temperatura i prekomjerne prašine.
- Održavanje kablova: Avoid bending or twisting the USB cable excessively, especially near the connectors, to prevent internal wire damage. Do not pull the cable to disconnect the scanner; always grasp the connector itself.
- Izbjegavajte kapi: While the scanner has drop resistance, repeated or severe drops can still cause damage. Handle the device with care.
8. Otkrivanje problema
If you encounter issues with your barcode scanner, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Skener se ne uključuje ili ne reaguje. | USB kabel nije pravilno spojen ili je USB priključak neispravan. | Ensure the USB cable is securely connected to both the scanner and the computer. Try a different USB port on your computer. Test the scanner on another computer if possible. |
| Skener se oglašava, ali se na ekranu ne prikazuju nikakvi podaci. | Incorrect input focus on the computer; application not ready to receive input. | Ensure the cursor is active in the desired text field or application before scanning. Try scanning into a simple text editor like Notepad to confirm basic functionality. |
| Skener ne čita barkodove. | Barcode damaged, poor print quality, incorrect distance/angle, or dirty scanning window. | Ensure the barcode is clear and undamaged. Adjust the distance and angle of the scanner relative to the barcode. Clean the scanning window as described in the Maintenance section. Verify the barcode symbology is supported by the scanner. |
| Scanner reads some barcodes but not others. | Specific barcode symbology is disabled or not supported. | Refer to the "Supported Symbologies" in the Features section. If a specific symbology is not listed, the scanner may not support it. Some advanced settings might be programmable via specific configuration barcodes (refer to a full programming manual if available). |
9. Garancija i podrška
This product is covered by a standard manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your purchase or contact your original point of sale or the manufacturer directly.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the vendor or manufacturer using the contact information provided at the time of purchase.
