Shinko 520

Shinko 520 Series Rear Tire User Manual

Model: 520 Series | Size: 100/90-19

1. Proizvod je gotovview

The Shinko 520 Series Rear Tire is engineered for off-road motorcycle applications, specifically designed to perform optimally in intermediate to hard terrain conditions. Its construction features a high carbon compound and a directional tread pattern, providing durability and traction. This tire is a tube-type design and is classified as NHS (Not for Highway Service), meaning it is intended exclusively for off-road use.

Shinko 520 Series Rear Tire, showing its aggressive knobby tread pattern.
Image 1.1: The Shinko 520 Series Rear Tire. This image displays the tire's robust construction and the distinct, aggressive knobby tread pattern designed for off-road traction.

2. Smjernice za instalaciju

Proper installation is crucial for tire performance and safety. It is highly recommended that tire installation be performed by a qualified professional using appropriate tools and techniques.

2.1 Provjere prije instalacije

  • Verify that the tire size (100/90-19) and specifications match your motorcycle's requirements.
  • Inspect the tire for any manufacturing defects or shipping damage before mounting.
  • Ensure the rim is clean, free of damage, and compatible with a tube-type tire.

2.2 Procedura montaže

  1. Podmažite rubove gume i rubove naplatka odgovarajućim mazivom za montažu guma.
  2. Insert the inner tube into the tire, ensuring it is not twisted. Lightly inflate the tube to give it shape.
  3. Carefully mount one bead of the tire onto the rim.
  4. Position the valve stem through the rim hole.
  5. Mount the second bead onto the rim, taking care not to pinch the inner tube.
  6. Inflate the tire to the recommended seating pressure to ensure both beads are properly seated on the rim. Listen for two distinct pops as the beads seat.
  7. Adjust the tire pressure to the recommended operating pressure for your specific riding conditions.

Important Note: This tire is NHS (Not for Highway Service). Do not use this tire on public roads or highways.

3. Rad i upotreba

The Shinko 520 Series Rear Tire is designed for optimal performance in off-road environments. Understanding its characteristics will enhance your riding experience.

3.1 Intended Terrain

This tire excels in intermediate to hard terrain. Its directional tread pattern and reinforced knobs are engineered to provide grip and resist tearing and chunking on varied surfaces, including rocks, hard-packed dirt, and loose topsoil. While it offers good traction in these conditions, its performance in deep mud or very soft sand may vary.

3.2 Pritisak u gumama

Optimal tire pressure is critical for performance, handling, and tire longevity. Recommended pressures can vary based on rider weight, motorcycle type, and specific terrain. Experimentation within safe limits may be necessary to find the ideal pressure for your riding style. Lower pressures can increase the tire's contact patch and improve traction on technical terrain, but may also increase the risk of pinch flats or rim damage. Higher pressures are generally better for harder surfaces or higher speeds within off-road limits.

Warning: This tire is M-rated for speeds up to 81 mph. Exceeding this speed rating can lead to tire failure. Always adhere to the NHS (Not for Highway Service) designation.

4. Održavanje

Regular maintenance extends the life of your tire and ensures consistent performance.

  • Pritisak u gumama: Check tire pressure before each ride. Adjust as needed based on terrain and load.
  • Vizuelni pregled: Regularly inspect the tire for cuts, punctures, cracks, or embedded objects. Pay close attention to the knobs for signs of excessive wear, tearing, or chunking.
  • Habanje gazećeg sloja: Monitor tread depth. Replace the tire when the tread is worn down to the wear indicators or when traction significantly diminishes.
  • čišćenje: After riding, clean the tire to remove dirt, mud, and debris. This helps prevent material buildup that could hide damage or accelerate wear.
  • Skladištenje: Store tires in a cool, dry place away from direct sunlight, chemicals, and ozone-producing equipment (e.g., electric motors).

5. Otkrivanje problema

This section addresses common issues that may arise during the use of your Shinko 520 Series Rear Tire.

5.1 Poor Traction / Slipping

  • Incorrect Tire Pressure: Both over-inflation and under-inflation can lead to poor traction. Adjust pressure according to terrain and rider preference. For very technical or rocky terrain, slightly lower pressures (e.g., 1.5-3 PSI) might improve grip, but increase risk of rim damage or pinch flats.
  • Worn Tread: If the tire's knobs are significantly worn, its ability to grip will be reduced. Consider tire replacement.
  • Unsuitable Terrain: While designed for intermediate to hard terrain, this tire may not provide optimal traction in extremely soft sand or deep, slick mud.

5.2 Rapid Wear or Knob Damage

  • Aggressive Riding Style: Frequent hard acceleration, braking, or sliding can accelerate wear.
  • Prekomjerna inflacija: Can lead to premature wear in the center of the tread.
  • Sharp Objects/Terrain: While reinforced, extreme terrain with sharp rocks or roots can still cause damage. Regular inspection is key.

6. Specifikacije

SpecifikacijaDetalj
BrandShinko
Model520 Series
Veličina100/90-19
Širina sekcije100 milimetara
Širina oboda19 inča
Prečnik gume100 inča
Ply Rating2-Ply (4-ply construction)
Tip gazećeg slojaDirectional
Tip konstrukcijeMulti-Ply
Speed ​​RatingM (up to 81 mph)
Vrsta uslugeTip cijevi
Highway UseNHS (Not for Highway Service)
Težina artikla14.4 unce
UPC182682853805
Broj dijela proizvođača87-4337

7. Garancija i podrška

For specific warranty information regarding the Shinko 520 Series Rear Tire, please refer to the documentation provided at the time of purchase or contact the authorized Shinko dealer or manufacturer directly. Warranty terms typically cover manufacturing defects.

For technical support or further inquiries, please reach out to your tire retailer or the official Shinko customer service channels.

Povezani dokumenti - 520

Preview WIL-101-TU デジタル指示濁度/SS 計 取扱説明書
SHINKO WIL-101-TU デジタル指示濁度/SS計の取扱説明書。本製品の設置、機能、操作、配線、仕様、校正、通信、およびトラブルシューティングに関する詳細情報を提供します。
Preview Shinko WIL-102-ECL Digitalni indikatorski mjerač provodljivosti - uputstvo za upotrebu
Uputstvo za upotrebu za Shinko WIL-102-ECL digitalni mjerač provodljivosti s utikačem. Obuhvata instalaciju, ožičenje, podešavanje, kalibraciju, mjerenje, komunikaciju, specifikacije i rješavanje problema.
Preview Shinko WIL-102-SE digitalni mjerač otpora s utičnicom, uputstvo za upotrebu
Ovo uputstvo za upotrebu pruža detaljne informacije o digitalnom mjeraču otpora Shinko WIL-102-SE s utičnicom, koje obuhvataju montažu, funkcije, rad, ožičenje, kalibraciju, specifikacije i rješavanje problema.
Preview Shinko WIL-102-SE Uputstvo za upotrebu: Vodič za digitalni mjerač otpora
Sveobuhvatno uputstvo za upotrebu Shinko WIL-102-SE digitalnog mjerača otpora s utičnicom. Obuhvata instalaciju, rad, podešavanje, kalibraciju, specifikacije, rješavanje problema i komunikacijske protokole za industrijsko mjerenje otpora.
Preview Shinko SIF-600 PLC interfejs jedinica: Uputstvo za upotrebu
Ovo sveobuhvatno uputstvo za upotrebu detaljno opisuje Shinko SIF-600 PLC interfejs jedinicu, obuhvatajući instalaciju, podešavanje, rad i rješavanje problema za primjenu u industrijskoj automatizaciji. Neophodno je za sigurnu i efikasnu upotrebu.
Preview Uputstvo za upotrebu Shinko ACS2 digitalnog indikatorskog kontrolera
Detailed instruction manual for the Shinko ACS2 Digital Indicating Controller, covering installation, wiring, operation, settings, and troubleshooting for industrial temperature control applications.