Bogen Classic C10 AmpKorisnički priručnik za lifier

1. Proizvod je gotovview

The Bogen Classic Series C10 Amplifier is designed to provide dependable audio performance and flexibility for various applications. This model is rated at 10 watts RMS output power and is UL and CSA listed, ensuring compliance with safety standards. It features discreet complementary transistor circuitry for maximum reliability of its power output stages.

C10 amplifier is part of a series that includes models with music-on-hold (MOH) output capabilities, though the C10 specifically focuses on amplification. It offers screw terminal connections for 600 Ohm 1 volt and 8 Ohm at 1 watt, along with a rear panel level control for easy adjustment.

Slika 1: Prednja strana view of the Bogen Classic C10 Amplifier, showing the main controls and branding.

2. Karakteristike

• RMS izlazna snaga: 10 Watts, suitable for various audio setups.
• Frekvencijski odziv: Wide range from 70 Hz to 16 kHz for clear audio reproduction.
• Niska distorzija: Total Harmonic Distortion (THD) of 1% ensures high-fidelity sound.
• Robust Circuitry: Designed with discreet complementary transistor circuitry for enhanced reliability.
• Fleksibilne veze: Screw terminal connections for 600 Ohm 1 volt and 8 Ohm 1 watt outputs.
• Podesiva kontrola nivoa: Conveniently located on the rear panel for output level management.
• Treble Equalizer: Built-in equalizer mode for treble adjustment.
• Sigurnosni certifikat: UL and CSA listed for assured safety and quality.

3. Sigurnosne informacije

Molimo vas da pročitate i razumjete sva sigurnosna uputstva prije upotrebe ovog uređaja. Nepoštivanje ovih uputstava može dovesti do strujnog udara, požara ili oštećenja uređaja.

• Izvor napajanja: Povežite amplifier only to the type of power source indicated on the marking label.
• ventilacija: Ensure adequate ventilation. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Voda i vlaga: Ne izlažite ovaj uređaj kiši ili vlazi. Ne koristite ga u blizini vode.
• toplina: Ne postavljajte u blizini izvora toplote kao što su radijatori, grejni registri, peći ili drugi uređaji (uključujući ampLifiers) koji proizvode toplotu.
• servisiranje: Sav servis prepustite kvalifikovanom servisnom osoblju. Servisiranje je potrebno kada je uređaj oštećen na bilo koji način, kao što je oštećen kabl za napajanje ili utikač, prolivena tečnost ili su predmeti upali u aparat, ako je uređaj bio izložen kiši ili vlazi, ne radi normalno , ili je odbačeno.
• čišćenje: Isključite ovaj proizvod iz zidne utičnice prije čišćenja. Nemojte koristiti tečna sredstva za čišćenje ili sredstva za čišćenje u obliku aerosola. Koristi oglasamp krpa za čišćenje.

4. Sadržaj paketa

Upon opening the package, verify that all components are present and in good condition. The standard package for the Bogen Classic C10 Amplifier typically includes:

• Bogen Classic C10 AmpLifier Unit
• Kabl za napajanje
• Korisnički priručnik (ovaj dokument)

If any items are missing or damaged, please contact your dealer or Bogen customer support immediately.

5. Podešavanje

Follow these steps to set up your Bogen Classic C10 Ampdizalica:

1. plasman: Postavite amplifier on a stable, flat surface with adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
2. Priključci zvučnika: Connect your speakers to the appropriate screw terminals on the rear panel. The C10 supports 8 Ohm at 1 watt speaker connections. Ensure correct polarity (+ to + and - to -) for optimal sound.
3. Ulazne veze: Povežite svoj audio izvor (npr. mikser, prednaponskiamplifier) to the input terminals. The amplifier provides screw terminal connections for 600 Ohm 1 volt input sources.
4. Priključak za napajanje: Osigurajte amplifier's power switch is in the OFF position. Connect the power cord to the amplifier's power inlet, then plug the other end into a suitable AC power outlet.
5. Početne postavke: Before powering on, ensure all volume/level controls on the amplifier are set to their minimum position to prevent sudden loud sounds.

6. Uputstvo za upotrebu

Jednom ampNakon što je uređaj za spašavanje podešen, slijedite ove korake za rad:

1. Uključeno: Flip the power switch on the front panel to the ON position. The power indicator light should illuminate.
2. Adjust Input Source: Ensure your audio source is playing.
3. Adjust Level Control: Slowly increase the level control knob on the rear panel until the desired output volume is achieved. Avoid setting the level too high, which can cause distortion.
4. Podešavanje visokih tonova: Use the treble equalizer control to fine-tune the high-frequency response of your audio.
5. Iskljuciti: When finished, turn the level control down, then flip the power switch to the OFF position.

7. Održavanje

Proper maintenance ensures the longevity and optimal performance of your Bogen Classic C10 Amplifier.

• čišćenje: Redovno čistite spoljašnjost amplifier with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the unit is unplugged and completely dry before reconnecting power. Do not use harsh chemicals or abrasive cleaners.
• ventilacija: Povremeno provjeravajte da li su ventilacijski otvori čisti od prašine i ostataka. Koristite meku četku ili komprimirani zrak za uklanjanje eventualnih blokada.
• Skladištenje: Ako pohranjujete amplifier for an extended period, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspekcija kablova: Periodically inspect all connected cables (power, input, speaker) for any signs of wear, fraying, or damage. Replace damaged cables immediately.

8. Otkrivanje problema

If you encounter issues with your Bogen Classic C10 AmpZa otklanjanje problema, pogledajte sljedeći vodič za rješavanje problema:

If the problem persists after trying these solutions, please contact Bogen customer support or a qualified service technician.

9. Specifikacije

10. Garancija i podrška

Bogen Communications International, Inc. provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website.

For technical support, service, or inquiries regarding your Bogen Classic C10 Amplifier, please contact Bogen customer support through their official channels. Have your model number (BG-C10) and serial number (if applicable) ready when contacting support.

Online resursi: For additional information, FAQs, and product updates, visit the official Bogen website.