PeakTech True RMS P 3131 Clamp Mjerač s multimetrom - uputstvo za upotrebu

1. Uvod

This manual provides comprehensive instructions for the safe and effective use of the PeakTech True RMS P 3131 Clamp Meter with Multimeter. This device is designed for measuring AC/DC currents without circuit interruption, as well as AC/DC voltage and resistance, with continuity testing capabilities. It features a 3 3/4 digit LCD display with True RMS measurement for accurate readings.

Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe uređaja i sačuvate ga za buduću upotrebu.

2. Sigurnosne informacije

WARNING: Improper use of this meter can cause damage, shock, injury, or death. Always follow all safety precautions.

• Uvijek se pridržavajte lokalnih i nacionalnih sigurnosnih propisa.
• Do not use the meter if it appears damaged or if the insulation on test leads is compromised.
• Prije mjerenja provjerite je li mjerač postavljen na ispravnu funkciju i raspon.
• Izbjegavajte kontakt sa strujnim krugovima pod naponom. Koristite odgovarajuću ličnu zaštitnu opremu (LZO).
• The device is rated for CAT II 600V. Do not exceed these limits.
• Odmah zamijenite baterije kada se pojavi indikator niske napunjenosti baterije.
• Do not operate the meter in explosive atmospheres.

3. Proizvod je gotovview i komponente

The PeakTech P 3131 is a robust and reliable clamp meter. Familiarize yourself with its main components:

Slika 1: Prednja strana view of the PeakTech P 3131 Clamp Mjerač koji pokazuje clamp jaw, function selector, LCD display, and input terminals.

• Clamp vilica: For non-contact AC/DC current measurement.
• Birač funkcija: To select measurement modes (A~, A=, V~, V=, Ω/Continuity, OFF).
• LCD ekran: Prikazuje očitanja mjerenja, jedinice i indikatore.
• Dugmad: AC/DC, ZERO, H/MAX (Data Hold/Max Hold).
• Ulazni priključci: COM (common) and VΩ (voltage/resistance) for test leads.
• Zaštita za ruke: Provides protection against accidental contact.

4. Podešavanje

4.1 Instalacija baterije

The PeakTech P 3131 requires two 1.5V AAA batteries (included). To install or replace batteries:

1. Uvjerite se da je uređaj ISKLJUČEN.
2. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
3. Upotrijebite odvijač da otvorite odjeljak.
4. Insert the two AAA batteries, observing correct polarity (+ and -).
5. Vratite poklopac odeljka za baterije i pričvrstite ga vijkom.

When the low battery indicator appears on the display, replace the batteries immediately to ensure accurate measurements.

4.2 Spajanje mjernih kabela

Za voltage, resistance, and continuity measurements, connect the supplied test leads:

• Umetnite crni test kabl u COM (common) input terminal.
• Umetnite crveni test kabl u VΩ ulazni terminal.

Figure 2: PeakTech P 3131 Clamp Meter shown with its carrying case, test leads, batteries, and user manual.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje napajanja

Rotate the function selector dial from the "OFF" position to any desired measurement function to power on the meter. To power off, rotate the dial back to "OFF". The meter features an automatic power-off function (can be deactivated) to conserve battery life.

5.2 Mjerenje AC/DC struje (Clamp)

Za mjerenje struje bez prekidanja strujnog kola:

1. Okrenite birač funkcija na A~ (AC struja) ili A= (jednosmjerna struja) položaj.
2. Pritisnite AC/DC button if you need to switch between AC and DC current modes (if the dial position combines them).
3. Pritisnite NULA button to zero the display before measuring DC current, especially for small currents, to compensate for residual magnetism.
4. Otvorite clamp vilicu pritiskom na okidač.
5. Samo priložite jedan conductor with the clamp vilica. Provjerite je li vilica potpuno zatvorena.
6. Očitajte trenutnu vrijednost na LCD zaslonu.

Figure 3: The PeakTech P 3131 Clamp Meter in use, measuring current on a single conductor within an electrical panel.

5.3 AC/DC Voltage Measurement

Za mjerenje voltage:

1. Spojite mjerne kablove kao što je opisano u Odjeljku 4.2.
2. Okrenite birač funkcija na V~ (AC Voltage) ili V= (DC Voltage) položaj.
3. Spojite mjerne sonde paralelno na strujno kolo ili komponentu koju želite mjeriti.
4. Pročitajte voltage vrijednost na LCD zaslonu.

5.4 Resistance and Continuity Measurement

To measure resistance or check for continuity:

1. Spojite mjerne kablove kao što je opisano u Odjeljku 4.2.
2. Okrenite birač funkcija na Ω/))) (Resistance/Continuity) position.
3. For resistance: Connect the test probes across the component. Ensure the circuit is de-energized.
4. For continuity: Touch the test probes to the two points you want to check. A continuous beep indicates a low-resistance path (continuity).
5. Očitajte vrijednost otpora na LCD ekranu.

5.5 Posebne funkcije

• Pravi RMS: The meter measures True Root Mean Square values for AC voltage and current, providing accurate readings for non-sinusoidal waveforms.
• Zadržavanje podataka (H): Pritisnite H/MAX kratko pritisnite dugme da biste zamrznuli trenutno očitavanje na ekranu. Pritisnite ponovo da biste otpustili.
• Maximum Value Hold (MAX): Pritisnite i držite H/MAX button to capture and display the maximum measured value. Press again to exit.
• ZERO Function: Used to zero the display for DC current measurements to eliminate offset errors.
• Automatsko podešavanje raspona: The meter automatically selects the appropriate measurement range.
• Automatsko isključivanje: The meter automatically turns off after a period of inactivity to save battery. This feature can typically be disabled by holding a specific button during power-on (refer to the device's on-screen indicators or a more detailed manual if available).

6. Održavanje

6.1 Čišćenje

Obrišite kućište mjerača oglasomamp krpom i blagim deterdžentom. Ne koristite abrazivna sredstva ili rastvarače. Prije upotrebe provjerite je li mjerač potpuno suh.

6.2 Zamjena baterije

Refer to Section 4.1 for instructions on battery replacement. Always use two fresh 1.5V AAA batteries. Remove batteries if the meter is not used for an extended period to prevent leakage.

6.3 Skladištenje

Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection.

7. Otkrivanje problema

If problems persist, contact PeakTech customer support or a qualified service technician.

8. Tehničke specifikacije

9. Garancija i podrška

PeakTech products are manufactured under strict quality control. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PeakTech webstranicu za detaljne uslove i odredbe garancije.

For technical support, service, or calibration inquiries, please contact your local PeakTech distributor or the PeakTech customer service department. Contact information can typically be found on the PeakTech websajtu ili u pakovanju proizvoda.