Velleman VM130T

Velleman VM130T 2-kanalni modul odašiljača daljinskog upravljača - korisnički priručnik

Model: VM130T

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your Velleman VM130T 2-Channel Remote Control Transmitter Module. Please read these instructions carefully before using the device to ensure optimal performance and safety.

2. Proizvod je gotovview

The Velleman VM130T is a compact, 2-channel handheld radio frequency (RF) remote control transmitter module designed for use with compatible Velleman RF receivers (e.g., K8057, VM109, VM130 receiver units). It features two distinct buttons for controlling two separate channels or functions, making it suitable for various remote control applications such as garage door openers, alarm systems, or lighting control.

Velleman VM130T 2-Channel Remote Control Transmitter Module

Figure 1: Velleman VM130T 2-Channel Remote Control Transmitter Module. This image displays the black, ergonomic remote control with two oval buttons and a small red indicator light, attached to a metal keyring.

3. Tehničke specifikacije

Broj modela:VM130T
Brand:Velleman
Tehnologija povezivanja:radiofrekvencija (RF)
Broj dugmadi:2
Tip kontrolera:Kontrola dugmadi
Napajanje:12V Battery (Alkaline, included)
Maksimalni domet:10 metara (otprilike 33 stope)
Dimenzije (D x Š x V):2.5 x 12.1 x 20 cm (približno 63 x 40 x 16 mm)
Težina:60 g
Boja:Crna
GTIN:05410329394479

4. Podešavanje

4.1. Instalacija baterije

The VM130T transmitter comes with a 12V alkaline battery pre-installed. If the battery needs replacement:

  1. Pažljivo otvorite casing of the remote control. The casing is typically clipped together.
  2. Uklonite staru 12V bateriju.
  3. Insert a new 12V alkaline battery, ensuring correct polarity (+ and -).
  4. Zatvorite casing sigurno.

4.2. Pairing with a Receiver

The VM130T is a transmitter module and requires a compatible Velleman RF receiver (e.g., K8057, VM109, VM130 receiver units) to function. The pairing procedure is specific to the receiver unit. Please refer to the instruction manual of your Velleman RF receiver for detailed steps on how to pair the VM130T transmitter with your receiver.

5. Uputstvo za upotrebu

Once the VM130T transmitter is successfully paired with your Velleman RF receiver, operation is straightforward:

6. Održavanje

6.1. Zamjena baterije

Replace the 12V alkaline battery when the transmission range decreases significantly or the indicator light fails to illuminate upon button press. Refer to section 4.1 for battery installation instructions.

6.2. Čišćenje

Clean the exterior of the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing. Avoid exposing the device to excessive moisture.

6.3. Skladištenje

Store the remote control in a dry place, away from direct sunlight and extreme temperatures, when not in use for extended periods.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Predajnik ne reaguje.Prazan ili prazna baterija.Replace the 12V battery (see section 4.1).
Smanjen radni domet.Low battery, environmental interference, or obstacles.Replace battery. Ensure clear line of sight if possible. Minimize interference from other RF devices.
Receiver does not react to transmitter.Transmitter not paired with receiver, or receiver malfunction.Verify pairing according to your receiver's manual. Check receiver's power supply and functionality.

8. Garancija i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Velleman customer service directly. Keep your proof of purchase for any warranty claims.

Proizvođač: VS Electronic Vertriebs GmbH