Xerox 7800/DX Phase kolor laserski štampač - uputstvo za upotrebu

Product Overview

The Xerox 7800/DX Phase Color Laser Printer is designed for professional environments requiring high-quality color printing and robust performance. This printer offers advanced capabilities for graphic-intensive tasks, including industry-leading media flexibility and professional color management technologies.

Slika 1: Prednja strana view of the Xerox 7800/DX Phase Color Laser Printer, showcasing its multi-tray design and control panel.

Uputstva za postavljanje

1. Raspakivanje i postavljanje

• Carefully remove the printer from its packaging. Due to its weight (approximately 256 pounds), it is recommended to use appropriate lifting equipment or assistance.
• Place the printer on a stable, level surface capable of supporting its weight and dimensions (27.52 x 25.24 x 37.52 inches). Ensure adequate ventilation around the unit.

2. Priključak za napajanje

• Spojite kabel za napajanje na pisač, a zatim na uzemljenu električnu utičnicu.
• Pritisnite dugme za napajanje da uključite štampač.

3. Instalacija toner kasete

The Xerox 7800/DX uses separate toner cartridges for Black, Cyan, Magenta, and Yellow. Refer to the printer's internal diagrams for specific slot locations.

1. Otvorite prednju pristupnu ploču štampača.
2. Unpack each toner cartridge (compatible cartridges include 05R02801, 05R02802, 05R02803, 05R02804, 05R02805, 05R02806).
3. Gently shake the cartridge to distribute the toner evenly.
4. Umetnite svaki kertridž u odgovarajući slot označen bojom dok ne klikne na svoje mjesto.
5. Zatvorite prednju pristupnu ploču.

Slika 2: Prample of an internal printer view, indicating where toner cartridges are typically installed.

4. Ubacivanje papira

The printer features multiple paper trays with a maximum input sheet capacity of 3140 sheets.

1. Pull out the desired paper tray. The printer has 2 trays as standard.
2. Adjust the paper guides to fit the paper size. The printer supports various sizes, including 8.5 x 11 inch and up to 11 inches in width.
3. Load the paper (plain paper is supported) into the tray, ensuring it is flat and below the maximum fill line.
4. Gently push the tray back into the printer.
5. Potvrdite vrstu i veličinu papira na kontrolnoj ploči ako se to od vas zatraži.

5. Instalacija softvera i drajvera

To enable printing from your computer, install the necessary drivers.

• The Xerox 7800/DX is compatible with PC, Mac, and Unix operating systems.
• Visit the official Xerox support webstranica za preuzimanje najnovijih drajvera za vaš operativni sistem.
• Pratite uputstva na ekranu da biste dovršili instalaciju.
• Connect the printer to your computer via USB or Ethernet cable.

Uputstvo za upotrebu

1. Control Panel Overview

The printer features a touchscreen control panel for easy navigation and settings adjustment. Use the touch interface to access menus, check printer status, and configure print jobs.

Slika 3: Detaljno view of the printer's touchscreen control panel, showing various menu options.

2. Osnovno štampanje

1. Otvorite dokument koji želite odštampati na računaru.
2. Iz menija aplikacije odaberite "Štampaj".
3. Choose the Xerox 7800/DX printer from the list of available printers.
4. Prilagodite postavke ispisa po potrebi, kao što su:
   • Boja/Monohromatski: The printer supports full color output with a maximum resolution of 1200 x 2400 dpi.
   • Dvostrano štampanje: Automatic dual-sided printing is supported.
   • Paper Source: Select the desired paper tray.
   • kopije: Up to 312 copies per run.
5. Click "Print." The printer has a maximum print speed of 45 pages per minute (ppm) for both color and monochrome. Initial page print time is 1-2 seconds.

3. Povezivanje

• Ethernet: Connect the printer to your network using an Ethernet cable for shared access.
• USB: A single USB 2.0 port is available for direct connection to a computer.

Održavanje

1. Toner Replacement

Kada je toner u kaseti nizak ili prazan, kontrolna ploča štampača će prikazati obavještenje. Zamijenite kasete na sljedeći način:

1. Open the front access panel.
2. Pažljivo uklonite prazan toner uložak tako što ćete ga ravno izvući.
3. Unpack a new, genuine Xerox toner cartridge of the correct color.
4. Shake the new cartridge gently.
5. Insert the new cartridge into the corresponding slot until it locks into place.
6. Zatvorite prednju pristupnu ploču.

2. Čišćenje

• Eksterijer: Obrišite vanjske površine mekom krpom, damp, krpa koja ne ostavlja dlačice. Izbjegavajte abrazivna sredstva za čišćenje.
• unutrašnjost: Periodically clean the interior of the printer, especially around the paper path and toner area, using a dry, lint-free cloth or a specialized printer vacuum. Refer to the printer's on-screen instructions for specific cleaning procedures.

Rješavanje problema

This section addresses common issues you might encounter. For more detailed troubleshooting, consult the full service manual or contact Xerox support.

Uobičajeni problemi i rješenja:

• Štampač ne reaguje:
  • Provjerite priključke za napajanje i uvjerite se da je štampač uključen.
  • Verify network or USB cable connections.
  • Ponovo pokrenite i štampač i računar.
  • Provjerite je li instaliran i odabran ispravan upravljački program za pisač.
• Loš kvalitet štampe:
  • Provjerite nivo tonera i zamijenite sve kertridže koji su ispražnjeni.
  • Perform a print head cleaning or calibration from the control panel.
  • Provjerite da li koristite odgovarajući papir za postavke ispisa.
• Zaglavljivanje papira:
  • Follow the on-screen instructions on the control panel to locate and clear the jam.
  • Provjerite da li je papir ispravno umetnut i da li su ladice prepunjene.
  • Remove any foreign objects from the paper path.

Tehničke specifikacije

Informacije o garanciji

The Xerox 7800/DX Phase Color Laser Printer comes with a full manufacturer's warranty. For specific terms and conditions, please refer to the documentation included with your product or visit the official Xerox website.

Važna napomena: All returns must be authorized by Xerox Corp. No exceptions.

Korisnička podrška

For further assistance, technical support, or to access additional resources, please contact Xerox Customer Support or visit their official website.

Više informacija i resursa za podršku možete pronaći na Xerox Store on Amazon or the main Xerox corporate website.