AUTONICS AT11DN-24-240 Multi-Function Timer Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective installation, operation, and maintenance of the AUTONICS AT11DN-24-240 Multi-Function Timer. This device is designed for precise timing control in various industrial and commercial applications, offering a wide timing range from 0.05 seconds to 100 hours and operating on 100VAC-240VAC power.

2. Sigurnosne mjere

Read these safety precautions carefully before using the product to ensure proper and safe operation. Failure to follow these instructions may result in electric shock, fire, or product damage.

• električna sigurnost: Ensure all wiring is performed by qualified personnel in accordance with local and national electrical codes. Disconnect power before installation, inspection, or maintenance.
• Napajanje: Proverite da li je napajanje voltage odgovara navedenoj zapremini proizvodatage range (100VAC-240VAC). Incorrect voltage može uzrokovati štetu.
• Instalaciono okruženje: Install the timer in an environment free from excessive vibration, dust, moisture, corrosive gases, or direct sunlight. Ensure adequate ventilation.
• Priključci terminala: Securely fasten all terminal connections to prevent loose contacts, which can lead to overheating or malfunction.
• Nosivost: Do not exceed the specified contact rating (5A resistive load). Overloading can damage the internal relay.

3. Proizvod je gotovview

The AUTONICS AT11DN-24-240 is a compact multi-function timer featuring a clear rotary dial for time setting and various indicators for operational status.

Figure 1: Front panel of the AUTONICS AT11DN-24-240 Multi-Function Timer.

This image displays the front panel of the AUTONICS AT11DN-24-240 Multi-Function Timer. Visible elements include the central rotary dial for time setting, marked with a scale from 0 to 10. Above the dial, there are 'POWER' and 'RUN' indicator lights. To the right, an 'OUT' indicator and a 'MODE' selector switch are present. The brand name 'Autonics' is printed at the bottom right of the panel.

3.1. Komponente prednje ploče

• Time Setting Dial: Rotary dial for setting the desired time value within the selected range.
• POWER indikator: Illuminates when power is supplied to the timer.
• RUN indikator: Illuminates during the timing operation.
• OUT indikator: Illuminates when the output relay is activated.
• Selektor načina rada: Switch to select the desired operating mode (e.g., ON-delay, Interval).

4. Podešavanje

4.1. Montaža

The AT11DN-24-240 timer is designed for panel mounting. Ensure sufficient space for wiring and ventilation. Secure the timer using the provided mounting hardware.

4.2. Ožičenje

Refer to the wiring diagram printed on the side of the timer or in the detailed product datasheet for specific terminal connections. Common connections include:

• Power Supply (100-240VAC): Spojite glavni izvor napajanja na predviđene priključke.
• Izlazni kontakti: Connect the load to the normally open (NO) and common (COM) terminals of the output relay. Ensure the load current does not exceed 5A resistive.
• Control Input (if applicable): Some modes may utilize external control inputs (e.g., START, RESET). Connect these as per the specific mode's requirements.

Warning: Ensure power is disconnected before performing any wiring.

4.3. Početne postavke

• Odabir vremenskog raspona: The timer supports various time ranges (e.g., seconds, minutes, hours). Select the appropriate range using the internal DIP switches or external selector, if present (refer to the detailed product datasheet for specific model configuration).
• Odabir načina rada: Use the 'MODE' selector switch on the front panel to choose the desired timing function (e.g., ON-delay, OFF-delay, Interval, Flicker).

5. Uputstvo za upotrebu

5.1. Postavljanje vremena

Rotate the central time setting dial to the desired time value. The dial is typically marked with a scale from 0 to 10, representing a percentage of the selected time range. For example, if the range is 10 minutes, setting the dial to '5' would correspond to 5 minutes.

5.2. Uključivanje

Once wiring and settings are complete, apply power to the timer. The 'POWER' indicator will illuminate.

5.3. Timing Operation

Depending on the selected mode:

• For ON-delay mode, timing begins immediately upon power application or trigger. The 'RUN' indicator will illuminate.
• Upon completion of the set time, the output relay will activate, and the 'OUT' indicator will illuminate.
• For other modes, refer to the specific timing chart in the detailed product datasheet.

6. Održavanje

The AUTONICS AT11DN-24-240 timer is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.

• čišćenje: Gently wipe the exterior of the timer with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• inspekcija: Periodically inspect wiring connections for tightness and signs of wear or damage. Check for any unusual sounds or odors during operation.
• Skladištenje: If storing the timer, keep it in a dry, dust-free environment within the specified temperature and humidity ranges.

7. Otkrivanje problema

If the timer does not operate as expected, consult the following table before contacting support.

8. Specifikacije

Key technical specifications for the AUTONICS AT11DN-24-240 Multi-Function Timer:

9. Garancija i podrška

AUTONICS products are manufactured under strict quality control standards. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official AUTONICS website. For technical assistance, troubleshooting beyond this manual, or repair services, please contact AUTONICS customer support or your authorized distributor.