PROXXON Table Saw FET Model 37070 Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective operation, setup, and maintenance of your PROXXON Table Saw FET Model 37070. Please read all instructions carefully before using the tool to ensure proper function and to prevent injury.

Figure 1: PROXXON Table Saw FET Model 37070

The PROXXON Table Saw FET is designed for precision cutting of various materials including wood, non-ferrous metals, plastics, Plexiglas, fiberglass-reinforced sheets, and foam. Its features include an adjustable blade, an extendable table, and a low-noise motor, making it suitable for intricate projects.

2. Sigurnosna uputstva

Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza kako biste smanjili rizik od požara, strujnog udara i tjelesnih ozljeda prilikom rada s električnim alatima.

• Pročitajte cijeli priručnik: Understand all operating procedures and warnings before use.
• Nosite zaštitu za oči: Uvijek nosite zaštitne naočale ili zaštitne naočale kako biste se zaštitili od letećih krhotina.
• Use Hearing Protection: Nosite zaštitu za uši tokom rada kako biste spriječili oštećenje sluha.
• Održavajte radnu površinu čistim: Cluttered areas invite accidents. Ensure adequate lighting.
• Izbjegavajte opasna okruženja: Nemojte koristiti električne alate u damp ili vlažne lokacije, ili ih izložite kiši. Održavajte radno područje dobro osvijetljeno.
• Držite djecu podalje: Svi posjetitelji trebaju biti na sigurnoj udaljenosti od radnog prostora.
• Osigurajte radni komad: Uvijek clamp ili osigurajte radni komad kako biste spriječili pomicanje tokom rezanja.
• Use Proper Blade: Ensure the correct blade type and size are installed for the material being cut.
• Isključite napajanje: Always disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.
• Održavanje alata: Održavajte alate oštrim i čistim za bolje i sigurnije performanse. Slijedite upute za podmazivanje i promjenu pribora.
• Izbjegavajte prisilno korištenje alata: The tool will do the job better and more safely at the rate for which it was designed.
• Never Reach Over Blade: Keep hands clear of the blade path at all times. Use a push stick when necessary.

3. Sadržaj paketa

The PROXXON Table Saw FET Model 37070 package typically includes the following items:

• PROXXON Table Saw FET unit
• Tungsten-tipped saw blade (80mm diameter, 36 teeth)
• Longitudinal stop (fence) with micro-adjustment screw
• Angle stop with rail
• Workpiece pusher
• Non-slotted ABS sawing gap cover
• Adapter za usisivač

Figure 2: Product packaging and included components

4. Postavljanje i montaža

Follow these steps to set up your table saw for initial use.

4.1 Attaching the Longitudinal Stop (Fence)

1. Slide the longitudinal stop onto the guide rail at the front of the table.
2. Position the stop to the desired measurement.
3. Secure the stop using the locking mechanism. For fine adjustments, use the integrated adjusting screw. Each turn of the screw allows for precise corrections, even as small as 0.004 inches (0.1mm).

4.2 Ugradnja lista pile

The saw comes with a tungsten-tipped blade installed. If you need to change or install a blade:

1. Isključite napajanje: Ensure the saw is unplugged from the power outlet.
2. Remove Table Insert: Carefully remove the table insert covering the blade area.
3. Otpustite maticu osovine: Use the provided wrench to loosen the arbor nut holding the blade.
4. Zamijenite oštricu: Remove the old blade and install the new blade, ensuring the teeth are oriented correctly for cutting. The saw supports blades with a diameter between 2 and 3 11/32 inches (50-85mm) and a 13/32 inch (10mm) center hole.
5. Zategnite maticu osovine: Čvrsto zategnite maticu osovine.
6. Reinstall Table Insert: Place the table insert back into position.

Figure 3: Tungsten-tipped saw blade for precision cutting

4.3 Priključivanje na napajanje

Connect the saw's power cord to a standard 110-120V AC, 60Hz electrical outlet.

5. Uputstvo za upotrebu

Understand the various adjustments and techniques for effective cutting.

5.1 Podešavanje visine i ugla oštrice

The saw blade's height and angle are adjustable to accommodate different material thicknesses and cut types.

• Visina oštrice: Use the adjustment knob located on the front of the saw to raise or lower the blade. The cutting depth ranges from 0.04 to 5/6 inches (1 to 22mm).
• Blade Angle (Miter Cuts): The blade can be tilted up to 45 degrees for miter cuts. Use the angle adjustment lever and scale to set the desired angle.

Figure 4: Blade angle adjustment mechanism

5.2 Making Straight Cuts (Ripping)

1. Set the blade height slightly above the workpiece thickness.
2. Adjust the longitudinal stop (fence) to the desired cutting width. Use the micro-adjustment screw for fine tuning.
3. Place the workpiece against the fence and firmly on the table.
4. Uključite pilu.
5. Slowly and steadily feed the workpiece into the blade, keeping it pressed against the fence. Use the workpiece pusher for safety, especially with smaller pieces.

Figure 5: Performing a straight cut with the longitudinal stop

5.3 Making Miter Cuts

1. Set the blade height appropriately.
2. Adjust the blade angle to the desired miter angle (up to 45 degrees).
3. Alternatively, use the angle stop with its rail, which slides in the milled slot on the table top. Set the angle stop to the required angle.
4. Place the workpiece against the angle stop and firmly on the table.
5. Uključite pilu i provucite radni komad kroz oštricu.
6. Double miter cuts are possible by combining blade tilt and angle stop adjustments.

5.4 Using the Extendable Table

The saw features an extendable table extension with an integrated auxiliary stop, useful for supporting larger workpieces and ensuring accurate cuts.

5.5 Vacuum Adapter

Attach a vacuum cleaner to the integrated adapter to maintain a clean work area and reduce dust exposure during operation.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše stolne pile.

6.1 Zamjena oštrice

Refer to Section 4.2 for detailed instructions on how to safely replace the saw blade.

6.2 Čišćenje

• Isključite napajanje: Uvijek isključite pilu iz struje prije čišćenja.
• Uklonite prašinu i ostatke: Use a brush or vacuum cleaner to remove sawdust and debris from the table, blade guard, and motor vents.
• Clean Table Surface: Wipe the table surface with a clean, dry cloth.
• Pregledajte komponente: Periodically inspect all moving parts, fasteners, and electrical cords for wear or damage.

7. Otkrivanje problema

This section addresses common issues you might encounter with your PROXXON Table Saw FET.

• Pila se ne pokreće:
  • Provjerite je li kabel za napajanje sigurno uključen u ispravnu utičnicu.
  • Provjerite je li prekidač za napajanje u položaju 'UKLJUČENO'.
  • Provjerite da li je prekidač strujnog kruga isključen.
• Neprecizni rezovi:
  • Ensure the longitudinal stop (fence) is securely locked and parallel to the blade. Use the micro-adjustment for precise alignment.
  • Check that the blade is clean, sharp, and correctly installed.
  • Verify that the workpiece is held firmly against the fence and table during the cut.
  • For miter cuts, ensure the angle stop or blade tilt is set accurately and secured.
• Pretjerane vibracije ili buka:
  • Check if the saw blade is properly tightened and not damaged.
  • Ensure the saw is placed on a stable, level surface.
  • Inspect for any loose components or debris inside the saw housing.
• Blade Binding or Slow Cutting:
  • The blade may be dull and require sharpening or replacement.
  • Ensure the correct blade type is used for the material.
  • Avoid forcing the workpiece; feed it at a consistent, appropriate speed.
  • Check for proper blade alignment and fence parallelism.

8. Specifikacije

9. Garancija i podrška

9.1 Ograničena garancija

PROXXON Inc. warrants to the original purchaser that all PROXXON consumer power tools will be free from defects in material or workmanship for a period of dvije godine od dana kupovine. This warranty covers repair or replacement of defective parts, provided the tool has not been misused, carelessly handled, or improperly repaired by unauthorized personnel.

This limited warranty does not apply to tools used for commercial manufacturing and construction applications, nor does it cover accessory items such as circular saw blades, drill bits, router bits, jigsaw blades, sanding belts, grinding wheels, and other related accessories. Damage resulting from tampering, accident, abuse, negligence, unauthorized repairs or alterations, unapproved attachments, or other causes unrelated to material or workmanship are not covered.

Any implied warranties are limited in duration to two years from the date of purchase. In no event shall PROXXON Inc. be liable for any incidental or consequential damages arising from the sale or use of this product.

All warranty claims must be accompanied by a copy of the packing slip, invoice, or other proof of purchase.

9.2 Korisnička podrška

For technical assistance, parts, or warranty inquiries, please contact PROXXON customer support. Refer to the product packaging or the official PROXXON webstranicu za ažurne kontakt informacije.