Uvod
This manual provides essential information for the proper installation and use of the Frymaster Fryer Conversion Kit 8260956. This kit is designed to convert specific Frymaster fryer models for use with Liquefied Petroleum (LP) gas. Adherence to these instructions is critical for safe and efficient operation.
Sigurnosne informacije
UPOZORENJE: Gas conversion procedures must only be performed by a qualified and licensed gas technician. Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read these instructions thoroughly before attempting any conversion.
- Ensure the fryer is disconnected from all power sources and gas supply before beginning any work.
- Verify that the conversion kit is compatible with your specific Frymaster fryer model.
- All local codes and ordinances regarding gas appliance installation must be followed.
- After conversion, thoroughly check for gas leaks using a non-corrosive leak detection solution.
- Affix all provided conversion labels to the fryer in visible locations as instructed.
Sadržaj paketa
The Frymaster Fryer Conversion Kit 8260956 typically includes the following components:
Slika 1: Components of the Frymaster Fryer Conversion Kit 8260956. This image displays several brass orifices, a metal gas fitting, a small spring, a cylindrical metal part, and two white labels with red text. One label reads "THIS UNIT HAS BEEN CONVERTED FOR USE WITH L.P. GAS" and the other reads "THIS CONTROL HAS BEEN CONVERTED TO LP".
- Multiple brass orifices (various sizes for specific burner requirements)
- Gas pressure regulator conversion fitting
- Spring for regulator adjustment
- Additional small metal components
- LP Gas conversion labels for unit and control
Please verify all components are present and undamaged before proceeding with installation.
Postavljanje i instalacija
VAŽNO: This procedure requires specialized knowledge and tools. It must be performed by a certified gas technician.
- Priprema: Disconnect the fryer from all utilities (electrical and gas). Allow the fryer to cool completely.
- Pristup: Remove necessary panels or components to gain access to the burner manifold and gas control valve.
- Zamjena otvora: Carefully remove the existing natural gas orifices from the burners. Install the new LP gas orifices provided in the kit. Ensure correct orifice sizes are used for each burner as per the fryer's service manual.
- Regulator Conversion: Convert or replace the gas pressure regulator according to the kit instructions. This typically involves replacing internal components or the entire regulator to match LP gas pressure requirements.
- Pilot Orifice (if applicable): If your model has a pilot light, replace the pilot orifice with the LP gas compatible one from the kit.
- Ponovno sastavljanje: Reassemble all removed panels and components.
- Označavanje: Affix the "THIS UNIT HAS BEEN CONVERTED FOR USE WITH L.P. GAS" label prominently on the fryer's exterior. Affix the "THIS CONTROL HAS BEEN CONVERTED TO LP" label near the gas control valve.
- Test curenja: Reconnect the LP gas supply. Perform a thorough leak test on all connections using a non-corrosive leak detection solution.
- Podešavanje pritiska: Adjust the LP gas pressure at the regulator to the specifications outlined in the fryer's service manual. This requires a manometer.
- Podešavanje plamenika: Adjust burner air shutters and pilot flames for proper combustion.
Refer to the specific service manual for your Frymaster fryer model for detailed, step-by-step conversion instructions.
Operating (Post-Conversion)
After successful conversion by a qualified technician, the fryer will operate on LP gas. Always ensure proper ventilation and follow the original fryer's operating instructions. Observe flame characteristics for proper combustion (blue flames with minimal yellow tipping).
Održavanje
Regular maintenance of your Frymaster fryer, including post-conversion checks, is essential for safety and longevity. This kit itself requires no specific maintenance beyond ensuring its components are correctly installed and sealed.
- Periodically inspect gas connections for any signs of leaks or corrosion.
- Ensure burner orifices remain clear of debris.
- Have a qualified technician perform annual inspections of all gas components and adjustments.
Rješavanje problema
If issues arise after conversion, consult a qualified gas technician. Common issues related to gas conversion include:
- No Gas Flow: Check LP tank supply, gas valve position, and ensure the regulator is properly installed and adjusted.
- Weak Flames/Poor Heating: May indicate incorrect gas pressure, partially blocked orifices, or improper air shutter adjustment.
- Yellow/Sooty Flames: Indicates incomplete combustion, often due to insufficient primary air or incorrect gas pressure.
- Miris plina: Immediately shut off gas supply, ventilate the area, and contact a qualified technician. Do not operate the fryer.
Do not attempt to repair gas components yourself. Always contact a certified professional.
Specifikacije
| Brand | Frymaster |
| Broj modela | 51-1230 |
| Broj dijela | 8260956 |
| Materijal | Metal |
| Dimenzije proizvoda | 4.5 x 4 x 2 inča |
| Težina artikla | 0.42 funte (6.72 unce) |
| UPC | 511230951128 |
| Proizvođač | FRYMASTER |
| Datum prve dostupnosti | 15. juna 2011 |
Informacije o garanciji
Specific warranty details for the Frymaster Fryer Conversion Kit 8260956 are provided by the manufacturer, Frymaster. Please refer to the documentation included with your purchase or visit the official Frymaster webstranicu za najnoviju politiku garancije.
Korisnička podrška
For technical assistance, installation guidance, or troubleshooting beyond the scope of this manual, please contact a qualified and licensed gas technician. For general product inquiries, you may contact Frymaster directly through their official customer support channels.
