InFocus IN112 Prijenosni DLP projektor Uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Šta se nalazi u kutiji

Provjerite da li se sve dolje navedene stavke nalaze u pakovanju vašeg proizvoda:

• InFocus IN112 Projector
• Kabl za napajanje
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Sigurnosne upute
• Uputstvo za upotrebu (ovaj dokument)
• Daljinsko upravljanje

3. Projektor je završenview

Slika 1: Vrh View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Slika 2: Bočna strana View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Slika 3: Pod uglom View s daljinskim - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Slika 4: Pozadi View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Podešavanje

4.1 Postavljanje

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Priključak za napajanje

1. Spojite priloženi kabel za napajanje na utičnicu za napajanje projektora.
2. Uključite drugi kraj kabla za napajanje u uzemljenu električnu utičnicu.

4.3 Povezivanje ulaznih izvora

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Kompozitni video: Use the A/V cable to connect to devices with composite video output.
• S-Video: Connect to devices with S-Video output.
• Audio ulaz: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Prije uključivanja projektora provjerite jesu li svi kablovi sigurno spojeni.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje napajanja

• Za uključivanje pritisnite Snaga button on the control panel or remote control. The power indicator light will illuminate.
• Za isključivanje, pritisnite Snaga ponovo pritisnite dugme. Potvrdite isključivanje ako se to od vas zatraži. Sačekajte da se projektor ohladi prije nego što ga isključite iz struje.

5.2 Podešavanje slike

• Fokus: Okrećite prsten za fokusiranje na objektivu projektora dok slika ne postane oštra i jasna.
• Ključni kamen: Koristite Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Odabir izvora

Pritisnite Izvor button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navigacija izbornikom

Pritisnite Meni/Izlaz dugme za pristup meniju na ekranu (OSD). Koristite tipke sa strelicama za navigaciju i Odaberite or Enter dugme za potvrdu odabira. Pritisnite Meni/Izlaz ponovo da biste zatvorili meni.

5.5 Ekološki režim

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Održavanje

6.1 Lamp Zamjena

Projektor lamp ima ograničen vijek trajanja. Kada lamp indikator (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Oprez: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Čišćenje

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Otkrivanje problema

8. Specifikacije

9. Garancija i podrška

9.1 Jamstvo za proizvod

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5 godine ograničene garancije na projektoru.
• 2 godina pune garancije pokrivanje delova i rada.
• 6-mjesečna garancija na lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus website.

9.2 Tehnička podrška

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official websajtu ili u priloženoj dokumentaciji.

10. Related Product Information (IN130 Series)

Sljedeći video pruža pregledview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.