Supermicro MBD-X9SCM-F-O Server Motherboard User Manual

Uvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Supermicro MBD-X9SCM-F-O server motherboard. Designed for reliable server applications, this Micro ATX board supports Intel Xeon E3-1200 family and 2nd Generation Intel Core i3/Pentium processors with an LGA 1155 socket and Intel C204 PCH chipset. It features ECC unbuffered DDR3 memory support, multiple PCI-Express slots, SATA2 and SATA3 ports with RAID capabilities, and integrated IPMI for remote management.

Image: Supermicro MBD-X9SCM-F-O Server Motherboard. This image displays the top-down view of the motherboard, highlighting the CPU socket, DIMM slots, PCI-Express slots, and various connectors.

Postavljanje i instalacija

1. Raspakivanje i pregled

Carefully remove the motherboard from its packaging. Inspect for any visible damage during transit. Verify that all accessories, such as the I/O shield, SATA cables, and documentation, are present.

2. Instalacija komponente

1. CPU instalacija: Open the CPU socket lever. Align the CPU (Intel Xeon E3-1200 family or 2nd Gen Core i3/Pentium) with the socket, ensuring the gold triangle on the CPU matches the triangle on the socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.
2. Instalacija hladnjaka procesora: Nanesite termalnu pastu na CPU ako nije prethodno nanesena na hladnjak. Montirajte hladnjak CPU-a prema uputama proizvođača, osiguravajući pravilan kontakt i sigurno pričvršćivanje. Spojite kabel ventilatora CPU-a na označeni CPU_FAN priključak na matičnoj ploči.
3. Instalacija memorije (RAM): This motherboard supports 4x 240-pin DDR3-1333/1066/800 DIMMs, ECC, Unbuffered, up to 32GB. Ensure you use ECC unbuffered memory modules. Open the clips on the DIMM slots. Align the memory module with the slot key. Press down firmly on both ends of the module until the clips snap into place. For optimal performance, install modules in matched pairs for dual-channel operation.
4. Instalacija uređaja za pohranu podataka: Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA ports on the motherboard. The board features 4x SATA2 ports (3Gb/s) and 2x SATA3 ports (6Gb/s). Connect SATA power cables from your power supply to the drives.
5. Instalacija kartice za proširenje: The motherboard has 4x PCI-Express 2.0 x8 slots (two run at x4). Insert expansion cards (e.g., RAID controllers, network cards) into the appropriate PCI-Express slots and secure them with the chassis screws.

3. Priključci za napajanje

• Spojite 24-pinski ATX glavni konektor za napajanje iz vašeg napajanja na odgovarajući priključak na matičnoj ploči.
• Connect the 8-pin (or 4-pin) ATX 12V CPU power connector to the CPU power header.

4. Prednja ploča i periferni priključci

• Connect the front panel headers (Power LED, HDD LED, Power Switch, Reset Switch) to their respective pins on the motherboard, referring to the motherboard layout diagram for correct polarity.
• Connect front panel USB 2.0 headers to the motherboard's USB 2.0 headers.
• Connect any other peripherals such as PS/2 keyboard/mouse, serial ports, and VGA to the rear I/O panel.
• Connect network cables to the two RJ45 LAN ports and the dedicated RJ45 IPMI LAN port.

Uputstvo za upotrebu

1. Initial Boot and BIOS/UEFI Configuration

Upon first power-on, the system will perform a Power-On Self-Test (POST). Press the designated key (usually DEL or F2) during POST to enter the BIOS/UEFI setup utility. Here you can configure:

• System Time and Date: Podesite tačno vreme i datum.
• Redoslijed pokretanja: Prioritize your boot devices (e.g., USB drive, optical drive, SSD/HDD) for operating system installation.
• SATA Configuration: Configure SATA modes (AHCI, RAID). The motherboard supports RAID 0/1/5/10 for SATA2 and RAID 0/1 for SATA3.
• IPMI Settings: Configure network settings for the dedicated IPMI port for remote management.

2. Instalacija operativnog sistema

Insert your operating system installation media (USB drive or DVD) and boot from it. Follow the on-screen prompts to install your preferred server operating system. Ensure that the necessary drivers are available for your OS version.

3. Instalacija drajvera

After OS installation, install all necessary drivers for the motherboard components, including chipset, LAN, video (Nuvoton WPCM450RA0BX Graphics Controller), and any RAID drivers if applicable. Drivers can typically be found on the Supermicro support webstranicu za vaš specifični model.

4. IPMI Remote Management

The Supermicro MBD-X9SCM-F-O features an Integrated Platform Management Interface (IPMI) via a dedicated LAN port. This allows for out-of-band management, including remote power control, virtual media, and KVM-over-IP. Access the IPMI web interfejs preko a web browser using the IP address configured in the BIOS or through the Supermicro IPMIView korisnost.

Održavanje

1. Čišćenje sistema

Regularly clean the interior of your server chassis to prevent dust buildup, which can lead to overheating and component failure. Use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.

2. Firmware and BIOS Updates

Periodically check the Supermicro website for updated BIOS/UEFI firmware. Firmware updates can improve stability, add support for new hardware, or fix bugs. Follow the provided instructions carefully when performing updates to avoid system damage.

3. Monitoring sistema

Utilize the IPMI interface for continuous monitoring of system health, including temperatures, fan speeds, and voltage levels. This proactive monitoring helps identify potential issues before they become critical.

Rješavanje problema

Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti.

1. Nema napajanja / Nema POST-a (samotestiranje pri uključivanju)

• Provjerite priključke za napajanje: Provjerite da li su 24-pinski ATX i 8-pinski CPU konektori za napajanje sigurno pričvršćeni.
• Provjerite napajanje: Test the power supply unit (PSU) to ensure it is functional and providing adequate power.
• Ponovno postavljanje komponenti: Remove and re-install the CPU, RAM modules, and any expansion cards to ensure they are properly seated.
• Obriši CMOS: Refer to the motherboard manual for instructions on how to clear the CMOS (Complementary Metal-Oxide-Semiconductor) settings, which can resolve boot issues caused by incorrect BIOS configurations.
• Minimalna konfiguracija: Attempt to boot with only essential components installed (CPU, one RAM stick, CPU cooler, power supply) to isolate the problem.

2. Memory Errors

• Use ECC Unbuffered RAM: This motherboard specifically requires ECC unbuffered DDR3 memory. Non-ECC RAM will not be recognized.
• Test RAM Modules: If you have multiple RAM sticks, test them individually in different slots to identify a faulty module or slot.
• Provjerite kompatibilnost: Ensure your RAM modules are compatible with the motherboard's specifications (DDR3-1333/1066/800).

3. Operating System Boot Issues

• Provjerite redoslijed pokretanja: Verify that the correct boot device is prioritized in the BIOS/UEFI settings.
• Reinstall OS: If the OS installation is corrupted, a clean reinstallation might be necessary.
• Problemi sa vozačem: Ensure all critical drivers (chipset, storage controller) are correctly installed.

Specifikacije