KOHLER GP1092203 UltraGlide Cold Valve Instruction Manual

1. Uvod

The KOHLER GP1092203 UltraGlide Cold Valve is a genuine replacement part specifically engineered for Kohler widespread faucets manufactured from 2011 to the present. This valve incorporates advanced UltraGlide technology, designed to prevent water from contacting the valve stem. This innovative approach significantly minimizes wear, reduces the potential for mineral buildup, and enhances the overall durability and leak prevention capabilities of your faucet.

2. Proizvod je gotovview

The GP1092203 UltraGlide Cold Valve is a critical component for maintaining the optimal performance of your Kohler faucet. Key features include:

• Genuine Kohler Part: Ensures compatibility and reliability with Kohler faucet systems.
• UltraGlide Design: Water flows through the valve without touching the stem, eliminating common leak paths and protecting internal components from water wear and mineral buildup.
• Izdržljiva konstrukcija: Engineered for longevity and consistent performance.
• NSF Compliant: Meets strict standards with ≤ 0.25% lead content.

Slika 2.1: Comparison of Previous Valve Design and UltraGlide Design. The UltraGlide design prevents water from contacting the O-ring, reducing wear and potential leak paths.

Slika 2.2: Visual comparison of the previous valve cartridge (GP77006-RP) and the new UltraGlide valve cartridge (GP1092203-Cold). The UltraGlide valve features a black plastic nut and a purple paint mark on the brass stem for identification.

3. Važne informacije o sigurnosti

Always observe the following safety precautions when working with plumbing fixtures:

• Isključite dovod vode: Before beginning any installation or maintenance, ensure the main water supply to the faucet is completely shut off.
• Nosite zaštitu za oči: Protect your eyes from debris or splashes.
• Koristite odgovarajuće alate: Ensure you have the correct tools for the job to prevent damage to the valve or faucet.
• Posavjetujte se sa profesionalcem: Ako niste sigurni u vezi s bilo kojim korakom, obratite se kvalificiranom vodoinstalateru.

4. Postavljanje i instalacija

This section outlines the general steps for replacing a cold valve cartridge. Specific faucet models may vary, so always refer to your faucet's original installation guide if available.

4.1. Provjera prije instalacije

Before installing, verify that you have the correct valve for your faucet. The GP1092203 is designed for newer Kohler widespread faucets (2011-present) that typically use a plastic-bodied valve. If your existing valve is all brass and copper, you may require the K-GP77006-RP model instead. Disassemble your faucet to confirm the existing valve type before proceeding.

4.2. Koraci instalacije

1. Zatvorite dovod vode: Locate and turn off the cold water supply valve under the sink or the main water supply to your home.
2. Slavina za odvod: Open the faucet handle to relieve any remaining water pressure and drain residual water.
3. Uklonite ručku slavine: Carefully remove the faucet handle according to your faucet model's instructions. This usually involves unscrewing a set screw or prying off a decorative cap.
4. Access Valve Cartridge: Remove any retaining nuts, screws, or clips that secure the existing valve cartridge in place.
5. Uklonite stari ventil: Gently pull out the old cold valve cartridge. Note its orientation for reference.
6. Ugradnja novog ventila: Insert the new KOHLER GP1092203 UltraGlide Cold Valve into the faucet body, ensuring it is correctly seated and oriented. The new UltraGlide valve can be identified by a purple paint mark on the brass stem and a black plastic nut.
7. Sigurnosni ventil: Reinstall any retaining nuts, screws, or clips to secure the new valve cartridge. Do not overtighten.
8. Ponovno sastavljanje slavine: Reattach the faucet handle and any other components removed during disassembly.
9. Obnova vodosnabdijevanja: Polako otvorite ventil za dovod hladne vode.
10. Provjerite ima li curenja: Inspect all connections for any signs of leaks. Run the faucet for a few moments to ensure proper operation and check for drips.

5. Uputstvo za upotrebu

The UltraGlide Cold Valve controls the flow of cold water to your faucet. Once installed, the valve operates in conjunction with your faucet handle. Turning the faucet handle will open or close the valve, regulating the cold water output and temperature when mixed with hot water.

6. Održavanje

The KOHLER GP1092203 UltraGlide Cold Valve is designed for minimal maintenance due to its innovative design that protects internal components from water exposure. However, regular checks can help ensure its longevity:

• Redovni pregled: Periodically check around the base of your faucet and under the sink for any signs of leaks or moisture.
• Clean Faucet Exterior: Keep the exterior of your faucet clean to prevent mineral buildup that could affect handle movement.
• Izbjegavajte oštre hemikalije: Do not use abrasive cleaners or harsh chemicals on your faucet, as these can damage finishes and potentially affect valve components.

7. Otkrivanje problema

If you encounter issues after installing your UltraGlide Cold Valve, consider the following:

• Curenja iz baze slavine:
  • Provjerite da su svi spojevi čvrsti, ali ne previše zategnuti.
  • Verify the valve is correctly seated within the faucet body.
  • Check if the correct valve model (GP1092203) was installed for your faucet. An older faucet might require a different valve (e.g., K-GP77006-RP).
• Stiff Faucet Handle:
  • Mineral buildup on external faucet components can cause stiffness. Clean the faucet thoroughly.
  • Ensure the valve was installed correctly and is not binding.
• No Water Flow or Reduced Flow:
  • Confirm the main water supply and the cold water shut-off valve under the sink are fully open.
  • Check for any obstructions in the faucet aerator.

If problems persist, it is recommended to contact Kohler Customer Support or a qualified plumber.

8. Specifikacije

9. Informacije o garanciji

As a genuine Kohler part, the GP1092203 UltraGlide Cold Valve is covered by Kohler's standard warranty for replacement parts. For specific warranty terms, conditions, and duration, please refer to the official Kohler website or contact Kohler customer support directly. Proof of purchase may be required for warranty claims.

10. Korisnička podrška

For further assistance, technical support, or to inquire about warranty claims, please contact Kohler Customer Service through their official channels. You can find detailed contact information, including phone numbers and online support options, by visiting the official Kohler webstranica:

Visit Kohler Official Website