PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill Instruction Manual

1. Uvod

This manual provides essential information for the safe and effective use of your PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill. Please read these instructions carefully before use and retain them for future reference.

1.1 Proizvod završenview

The PROLINE CM86 series carbide tipped rotary masonry drills are engineered for drilling into coarse materials that produce a powder or gravel-like debris. These drills are suitable for use with standard rotary power tools and are optimized for light to medium hard building materials.

1.2 Ključne karakteristike

• Carbide Tipped: For enhanced durability and cutting performance.
• Deep Flute: Design for efficient debris removal.
• German Made: Craftsmanship ensuring quality.
• duga dužina: For deeper drilling applications.
• Svestran: Compatible with standard rotary power tools.

Image: A single PROLINE CM86-5/16 carbide tipped rotary masonry drill bit, showcasing its deep flute design and carbide tip.

2. Sigurnosne informacije

Always prioritize safety when using power tools and drill bits. Failure to follow safety guidelines can result in serious injury.

• Nosite zaštitu za oči: Uvijek nosite zaštitne naočale ili zaštitne naočale kako biste se zaštitili od letećih krhotina.
• Nosite zaštitu za sluh: Use ear protection, especially during prolonged drilling operations.
• Nosite rukavice: Protect hands from sharp edges and vibrations.
• Osigurajte radni komad: Ensure the material being drilled is firmly clamped or secured to prevent movement.
• Koristite ispravnu brzinu: Operate your rotary power tool at the appropriate speed for the material and drill bit size.
• Izbjegavajte pregrijavanje: Allow the drill bit to cool periodically, especially during continuous use, to prevent damage to the bit and workpiece.
• Pregledajte Bit: Before each use, inspect the drill bit for any signs of damage, wear, or dullness. Do not use damaged bits.
• Isključite napajanje: Always disconnect the power tool from its power source before changing drill bits or performing maintenance.
• Održavajte radni prostor čistim: Ensure your work area is well-lit and free from obstructions.

3. Podešavanje

3.1 Installing the Drill Bit

1. Provjerite je li električni alat isključen: Verify that your rotary power tool is unplugged or its battery is removed.
2. Otvori Chuck: Rotate the chuck counter-clockwise to open the jaws wide enough to accept the drill bit shank.
3. Umetnuti bit: Insert the shank of the PROLINE CM86-5/16 drill bit into the chuck. Ensure it is inserted as far as possible without the flutes touching the chuck jaws.
4. Zategnite steznu glavu: Rotate the chuck clockwise to securely tighten the jaws around the drill bit shank. For chucks requiring a key, use the key to ensure maximum tightness. A loose bit can be dangerous and cause inaccurate drilling.
5. Provjera sigurnosti: Gently pull on the drill bit to confirm it is firmly seated and will not slip during operation.

4. Uputstvo za upotrebu

4.1 Drilling Masonry Materials

1. Select Appropriate Speed: For masonry drilling, generally use a slower speed setting on your rotary power tool. Consult your power tool's manual for specific recommendations.
2. Lokacija za označavanje bušenja: Clearly mark the exact spot where you intend to drill.
3. Počnite polako: Begin drilling at a slow speed with light pressure to create a pilot indentation and prevent the bit from wandering.
4. Primijenite stalan pritisak: Once the bit has engaged the material, increase the speed and apply steady, firm pressure. Avoid excessive force, which can overheat the bit or damage the power tool.
5. Očistite krhotine: Periodically withdraw the drill bit from the hole to allow debris to clear from the flutes. This is especially important for deep holes.
6. Održavajte pravi ugao: Držite svrdlo okomito na površinu kako biste osigurali ravnu rupu.
7. hlađenje: For prolonged drilling, especially in hard materials, allow the bit to cool down to prevent premature wear.
8. Završavanje bušenja: Once the desired depth is reached, slowly withdraw the drill bit from the hole while the drill is still rotating.

4.2 Preporučeni materijali

This drill bit is designed for optimal performance in:

• Light to medium hard building materials
• Materials that produce coarse powder or gravel when drilled

Caution: Not recommended for use in materials requiring hammer drill action unless specifically designed for such use by the power tool manufacturer.

5. Održavanje i skladištenje

5.1 Čišćenje

After each use, clean the drill bit to remove any dust, debris, or residue. A stiff brush or compressed air can be used. Ensure the bit is dry before storage.

5.2 Inspekcija

Regularly inspect the carbide tip for chipping or excessive wear. Check the flutes for any obstructions or damage. A dull or damaged bit should be replaced to ensure safety and efficiency.

5.3 Skladištenje

Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips and prevent accidental injury. Store out of reach of children.

6. Otkrivanje problema

7. Specifikacije

8. Garancija i podrška

For information regarding warranty coverage or technical support for your PROLINE CM86-5/16 drill bits, please refer to the manufacturer's official website or contact Champion Cutting Tool Corp. directly. Keep your purchase receipt as proof of purchase.

Proizvođač: Champion Cutting Tool Corp.