APC BR1500GI

APC Back-UPS Pro 1500VA 230V Power Saving UPS Instruction Manual

Model: BR1500GI | Brand: APC

Uvod

Welcome to your APC Back-UPS Pro 1500VA 230V Power Saving Uninterruptible Power Supply. This manual provides essential information for the safe and efficient operation of your UPS, designed to protect your electronic equipment from power outages, surges, and fluctuations. Please read this manual thoroughly before installation and use.

Sigurnosne mjere

Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

Product Overview

The APC Back-UPS Pro 1500VA 230V is a tower form factor UPS providing reliable battery backup and surge protection for your critical electronic equipment.

Karakteristike prednjeg panela

Front view of APC Back-UPS Pro 1500VA

Front view of the APC Back-UPS Pro 1500VA unit, showing the LCD display and control buttons.

Karakteristike zadnjeg panela

Pozadi view of APC Back-UPS Pro 1500VA

Pozadi view of the APC Back-UPS Pro 1500VA unit, showing the power outlets, data ports, and main power input.

Setup

  1. Raspakujte i pregledajte: Carefully unpack the UPS and all accessories. Inspect for any shipping damage.
  2. Povežite unutrašnju bateriju: The UPS battery may be disconnected for shipping. Refer to the battery compartment access panel (usually at the bottom or rear) and connect the battery terminals as indicated.
  3. Pozicionirajte UPS: Place the UPS in a location with adequate ventilation, away from direct sunlight, excessive heat, or moisture. Ensure the front and rear vents are unobstructed.
  4. Priključite na zidnu utičnicu: Plug the UPS power cord directly into a grounded 230V wall outlet. Avoid using extension cords or surge protectors with the UPS input.
  5. Početna naplata: Allow the UPS to charge for at least 24 hours before connecting any equipment to ensure maximum battery runtime. The battery indicator on the LCD will show charging status.
  6. Povežite opremu:
    • Priključite kritičnu opremu (npr. računar, monitor, ruter) u Rezervna baterija i zaštita od prenapona poslovnice.
    • Uključite nebitnu opremu (npr. štampač, skener) u Surge Only poslovnice.
  7. Spajanje podatkovnih linija (opciono): Connect your USB communication cable from the UPS to your computer to enable power management software features. Connect network cables to the Ethernet protection ports if desired.

Uputstvo za upotrebu

Uključivanje/isključivanje

LCD ekran Navigacija

Upravljanje alarmom

Održavanje

Zamjena baterije

Čišćenje

Skladištenje

Rješavanje problema

U nastavku su navedeni uobičajeni problemi i njihova moguća rješenja:

ProblemMogući uzrokRješenje
UPS se neće uključitiBattery disconnected or low charge; UPS not plugged in.Ensure battery is connected. Plug UPS into a live wall outlet and allow to charge.
Kratko vrijeme rada baterijeOverloaded; battery old or not fully charged.Reduce connected load. Allow battery to charge for 24 hours. Replace battery if old.
UPS emits continuous alarmOn battery mode; overload; battery fault.Check power source. Reduce load. Check battery status on LCD.
Nema struje u utičnicamaUPS off; circuit breaker tripped; battery fault.Turn UPS on. Reset circuit breaker. Check battery status.

Tehničke specifikacije

FeatureSpecifikacija
Broj modelaBR1500GI
Dimenzije proizvoda4.41 x 15.04 x 11.89 inča
Težina artikla27.9 funte
Voltage230 Volts
BaterijePotrebna je 1 baterija od 12V (uključena)
Sastav baterije baterijeOlovna kiselina
BojaCrna
MaterijalMetal
Form FactorToranj

Garancija i podrška

For detailed warranty information, product registration, and technical support, please visit the official APC by Schneider Electric webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini za bilo kakve reklamacije u garanciji.

Dodatne resurse i kontakt informacije možete pronaći na APC by Schneider Electric trgovina na Amazonu.