1. Uvod
The AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
Ključne karakteristike:
- Automatsko raspoređivanje: Steps extend and retract automatically with door operation.
- Robusna konstrukcija: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- Visoka nosivost: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- Poboljšana sigurnost: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- Vehicle-Specific Fitment: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. Postavljanje i instalacija
The AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official Uputstvo za instalaciju (PDF). This section provides a general overview.
Razmatranja prije instalacije:
- Ensure you have all components listed in the packing list.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
Opći koraci instalacije:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
Slika: The AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. Operacija
The AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Automatsko postavljanje i uvlačenje:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
Slika: Krupni plan view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. Održavanje
Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg AMP Research PowerStep.
čišćenje:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Temeljito isperite čistom vodom.
inspekcija:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. Otkrivanje problema
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Stepenice su bučne tokom rada. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| LED svjetla ne rade. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
Slika: Donja strana view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. Specifikacije
| Atribut | Detalj |
|---|---|
| Brand | AMP Istraživanja |
| Broj modela | 75137-01A |
| Materijal | Aluminijum |
| Boja | Crna |
| Vanjski završetak | Painted |
| Dimenzije artikla (D x Š x V) | 8 x 81 x 13 inča |
| Težina artikla | 45 funti |
| Ograničenje težine | 600 funti |
| UPC | 815410010347 |
| Vrsta usluge vozila | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. Garancija i podrška
Informacije o garanciji:
AMP Istraživanje stoji iza svojih proizvoda s jednostavnim, sveobuhvatnim Garancija od 5 godina/60,000 kilometaraOva garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za potrebe reklamacije.
Korisnička podrška:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP Istraživanja website.
For the complete installation guide and other documentation, please refer to the Zvanični korisnički priručnik u PDF formatu.
