Axxess GMOS-05

Axxess GMOS-05 OnStar interfejs - uputstvo za upotrebu

Model: GMOS-05 | Brand: Axxess

1. Uvod

The Axxess GMOS-05 OnStar Interface is designed to facilitate the replacement of an Original Equipment Manufacturer (OEM) radio with an aftermarket receiver in specific non-amplified GM vehicles. This interface is compatible with vehicles equipped with the "Door-n-Lock" style harness. It ensures the retention of key factory features, including OnStar functionality and safety/warning chimes, while also providing necessary outputs for navigation radio installations.

2. Sigurnosne informacije

Please read all instructions carefully before installation. Improper installation may result in damage to the vehicle's electrical system, the interface module, or the aftermarket radio.

3. Sadržaj paketa

Verify that all items are present before proceeding with the installation.

Axxess GMOS-05 Interface Module and Wiring Harnesses
Slika 3.1: Axxess GMOS-05 Interface Module and Wiring Harnesses. This image displays the main GMOS-05 interface module, a black rectangular box, along with two distinct wiring harnesses. One harness features a large white multi-pin connector, while the other has a smaller black connector, both designed for vehicle integration.

4. Postavljanje i instalacija

This section provides general instructions for installing the GMOS-05 interface. Specific vehicle disassembly and reassembly procedures are not covered and should be referenced from a vehicle-specific service manual or professional guide.

4.1. Ožičenje

Match the wires from the GMOS-05 harness to the corresponding wires on your aftermarket radio's harness. Refer to the color codes below.

Close-up of Main Wiring Harness Connector
Slika 4.1: Close-up of Main Wiring Harness Connector. This image shows a detailed view of the primary wiring harness, highlighting the multi-colored wires and the large white connector that interfaces with the vehicle's factory wiring. A smaller red connector is also visible, typically for specific signal wires.
GMOS-05 Wiring Color Code
Boja žiceFunkcijaPoveži se sa
Žuta12V Constant PowerAftermarket Radio Yellow Wire
Crveni12V pomoćno napajanjeAftermarket Radio Red Wire
CrnaGroundAftermarket Radio Black Wire
NarandžastaIluminacijaAftermarket Radio Orange Wire (if applicable)
Plavo/bijeloAmpLifier Turn-OnAftermarket Radio Amp Turn-On Wire (if applicable)
ZelenoLijevi prednji zvučnik (+)Aftermarket Radio Left Front Speaker (+)
Zelena/crnaLijevi prednji zvučnik (-)Aftermarket Radio Left Front Speaker (-)
BijeloDesni prednji zvučnik (+)Aftermarket Radio Right Front Speaker (+)
Bijela/CrnaDesni prednji zvučnik (-)Aftermarket Radio Right Front Speaker (-)
GreyStražnji lijevi zvučnik (+)Aftermarket Radio Left Rear Speaker (+)
Siva/CrnaLijevi stražnji zvučnik (-)Aftermarket Radio Left Rear Speaker (-)
VioletStražnji desni zvučnik (+)Aftermarket Radio Right Rear Speaker (+)
Ljubičasta / CrnaStražnji desni zvučnik (-)Aftermarket Radio Right Rear Speaker (-)
Svijetlo zelenaIzlaz ručne kočniceAftermarket Radio Parking Brake Input (for navigation)
PlavaIzlaz za senzor brzine vozila (VSS)Aftermarket Radio VSS Input (for navigation)
BrownObrnuti izlazAftermarket Radio Reverse Input (for navigation/camera)

Napomena: This wiring diagram is a general guide. Always refer to the specific wiring instructions provided with your aftermarket radio and vehicle for precise connections.

4.2. Koraci instalacije

  1. Pripremite vozilo: Disconnect the negative battery terminal. Remove the factory radio from the dashboard.
  2. Žične veze: Connect the wires from the GMOS-05 harness to the aftermarket radio harness according to the wiring color code (Section 4.1). Solder and heat-shrink all connections for reliability.
  3. Connect GMOS-05 Module: Plug the prepared GMOS-05 harness into the GMOS-05 interface module.
  4. Veza vozila: Connect the vehicle-specific connectors from the GMOS-05 harness into the factory wiring harnesses in the vehicle's radio opening.
  5. Izlazi navigacije: If installing a navigation radio, connect the Light Green (Parking Brake), Blue (VSS), and Brown (Reverse) wires from the GMOS-05 harness to the corresponding inputs on your navigation radio.
  6. Test sistem: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio, OnStar, and safety chimes.
  7. Prilagodite postavke: Adjust OnStar volume and chime levels as described in Section 5.1.
  8. Završna skupština: Once all functions are verified, securely mount the aftermarket radio and reassemble the dashboard.

5. Operating Features and Adjustments

The GMOS-05 interface retains several factory features and allows for adjustments to optimize your audio experience.

5.1. OnStar and Chime Volume Adjustment

The GMOS-05 allows for independent adjustment of OnStar volume and safety/warning chime levels. This is typically done via potentiometers (small adjustment screws) located on the GMOS-05 module itself.

Perform these adjustments with the vehicle running and the aftermarket radio powered on to accurately gauge the sound levels.

5.2. Navigation Radio Outputs

The GMOS-05 provides dedicated outputs for aftermarket navigation radios, which require specific vehicle data for proper operation.

6. Održavanje

The Axxess GMOS-05 interface module is designed for maintenance-free operation once properly installed.

7. Otkrivanje problema

Uobičajeni problemi i rješenja
ProblemMogući uzrokRješenje
No audio from aftermarket radio.Incorrect speaker wiring; no power to radio; interface not initialized.Verify all speaker wires are correctly connected. Check 12V constant and accessory power. Ensure the interface is properly connected to the vehicle's data bus.
OnStar or safety chimes are not working or are too loud/quiet.Incorrect connection to GMOS-05; volume potentiometers need adjustment.Confirm the GMOS-05 module is properly connected. Adjust the "OnStar Vol" and "Chime Vol" potentiometers on the module (refer to Section 5.1).
Zamjenski radio se ne uključuje.No 12V constant or accessory power; blown fuse.Check the vehicle's fuse box for blown fuses. Verify the Yellow (constant) and Red (accessory) wires are correctly connected and receiving power.
Navigation features (e.g., parking brake, VSS, reverse) are not functioning.Outputs from GMOS-05 not connected to navigation radio.Ensure the Light Green, Blue, and Brown wires from the GMOS-05 are correctly connected to the corresponding inputs on your navigation radio (refer to Section 4.1).

If troubleshooting steps do not resolve the issue, contact Axxess technical support or a certified installer.

8. Specifikacije

9. Garancija i podrška

The Axxess GMOS-05 interface is manufactured by Metra Electronics. For warranty claims or technical support, please contact the retailer from whom the product was purchased. The retailer will then coordinate with Metra Electronics for warranty services. It is recommended to retain your proof of purchase for warranty purposes.

For additional technical assistance or detailed product information, please visit the official Axxess or Metra Electronics website.

Povezani dokumenti - GMOS-05

Preview AXXESS GMOS-044 Installation Instructions for Chevrolet Cruze
Detailed installation instructions for the AXXESS GMOS-044 interface, enabling retention of factory features like OnStar, chimes, and steering wheel controls in Chevrolet Cruze 2011-2016 models with monochrome screens.
Preview Vodič za instalaciju Axxess GMOS-13 GM podatkovnog interfejsa za Cadillac STS od 2005. do 2011. godine
Vodič za instalaciju Axxess GMOS-13 GM podatkovnog interfejsa, koji omogućava integraciju audio sistema u automobile u Cadillac STS vozila proizvedena 2005-2011, uz zadržavanje fabričkih funkcija poput OnStar-a, Bluetooth-a i amplificirani zvučni sistemi.
Preview Axxess GMOS-LAN-012 Installation Instructions
Detailed installation guide for the Axxess GMOS-LAN-012 interface, providing features like accessory power, retained accessory power, and compatibility with various GM vehicles. Includes wiring instructions, programming steps, and troubleshooting tips.
Preview Axxess AX-GMLAN29 GM Data Interface 2006-2017 Installation Guide
Installation instructions for the Axxess AX-GMLAN29 GM Data Interface, designed for 2006-2017 GM vehicles. This guide details interface features, components, vehicle applications, required tools, wiring connections, installation steps, and initialization procedures.
Preview Axxess CHTO-013 Installation Instructions for Chrysler Vehicles
Detailed installation guide for the Axxess CHTO-013 interface module, designed for Chrysler, Dodge, Jeep, Mitsubishi, and Volkswagen vehicles from 2004 onwards. Includes wiring instructions, kit features, and testing procedures.
Preview AXXESS AXTO-TY2 Toyota AmpUpute za instalaciju lifier interfejsa
Detaljan vodič za instalaciju za AXXESS AXTO-TY2 ampInterfejs za podizanje struje, dizajniran za Toyota vozila proizvedena 2012. godine i novije. Obuhvata karakteristike, komponente, primjene, ožičenje i korake programiranja.