RICOO R17 Univerzalni nagibni zidni nosač za TV Uputstvo za upotrebu

1. Uvod

Thank you for choosing the RICOO R17 Universal Tilting TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.

The RICOO R17 is designed for flat and curved LED LCD TVs ranging from 37 to 75 inches, with a maximum load capacity of 100 kg. It supports VESA mounting patterns from 300x200mm to 600x400mm and offers a continuous tilt of +/-15 degrees, with a slim wall distance of only 65mm.

2. Sigurnosne informacije

UPOZORENJE: Improper installation or use of this product can result in serious injury or damage. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Nemojte prekoračiti maksimalnu nosivost od 100 kg (220 lbs).
• Osigurajte da zidna konstrukcija može sigurno podnijeti ukupnu težinu nosača i televizora.
• Always use appropriate personal protective equipment during installation.
• Verify all components are present and undamaged before installation. Do not use damaged parts.
• Tighten all screws firmly but do not overtighten. Overtightening can damage the screws and components.
• Ovaj proizvod je namijenjen samo za unutarnju upotrebu.
• Držite djecu i kućne ljubimce podalje tokom instalacije.

3. Sadržaj paketa

Please check the package contents against the list below. If any parts are missing or damaged, contact RICOO customer service.

• Pre-assembled TV wall mount bracket
• Wall plugs (for concrete walls only)
• Various screws for TV attachment (M4, M6, M8)
• Wall mounting screws and accessories
• Spirit level (small)
• Uputstvo za upotrebu

Slika: Prekoview of the RICOO R17 TV Wall Mount and its main components.

4. Postavljanje i instalacija

Before starting, ensure you have the necessary tools: drill, stud finder (if applicable), screwdriver, measuring tape, and a pencil. It is recommended to have two people for installation, especially for larger TVs.

4.1. Provjera VESA kompatibilnosti

This mount supports VESA patterns from 300x200mm to 600x400mm. Measure the horizontal and vertical distances between the mounting holes on the back of your TV. Ensure these measurements fall within the supported range.

Image: VESA compatibility chart showing supported hole patterns and examples of correct and incorrect mounting.

The horizontal distance between holes should be between 50mm and 700mm. The vertical distance between holes should be between 75mm and 400mm. The TV's weight must not exceed 100 kg.

4.2. Attaching Brackets to TV

1. Pažljivo postavite televizor ekranom prema dolje na meku, čistu površinu kako biste spriječili ogrebotine.
2. Identify the correct screws (M4, M6, or M8) and spacers (if needed) that fit your TV's mounting holes.
3. Attach the two vertical TV brackets to the back of your TV using the selected screws. Ensure the brackets are oriented correctly, with the hooks facing downwards and towards the wall plate.

4.3. Mounting the Wall Plate

1. Determine the desired height for your TV. Mark the drilling points on the wall using the wall plate as a template.
2. Use a stud finder to locate wall studs if mounting on wood stud walls. For concrete or brick walls, use the provided wall plugs.
3. Izbušite pilot rupe na označenim lokacijama.
4. Attach the wall plate securely to the wall using the appropriate wall screws. Use the small spirit level to ensure the wall plate is perfectly horizontal.

Image: Visual guide demonstrating the effortless process of hanging the TV onto the mounted wall plate.

4.4. Hanging the TV

1. Uz pomoć, pažljivo podignite TV pomoću priloženih nosača.
2. Zakačite nosače TV-a na gornju ivicu zidne ploče.
3. Pažljivo spustite TV dok se nosači potpuno ne uklope u zidnu ploču.
4. Secure the TV to the wall plate using the safety screws located at the bottom of the TV brackets. This prevents accidental dislodgement.

Slika: Sa strane view illustrating the slim 65mm distance between the TV and the wall once mounted.

5. Uputstvo za upotrebu

5.1. Adjusting Tilt Angle

The RICOO R17 allows for continuous tilting of your TV by +/-15 degrees. To adjust the tilt:

1. Loosen the tilt adjustment knobs on the side of the TV brackets.
2. Carefully tilt the TV to your desired viewing kut.
3. Tighten the tilt adjustment knobs to secure the TV in place.

Image: Diagram showing the TV's ability to tilt smoothly up to 30 degrees for optimal viewing.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vašeg zidnog nosača za TV.

• Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti.
• Očistite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Do not hang additional items on the TV or the mount.

7. Otkrivanje problema

8. Specifikacije

Image: Technical drawing with detailed dimensions of the RICOO R17 wall mount in millimeters.

Image: Visual representation highlighting the maximum load capacity of 100 kg for the TV mount.

Image: Diagram illustrating the VESA compatibility, suitable for patterns up to 700x400mm.

9. Garancija i podrška

For warranty information or technical support, please contact RICOO customer service. Keep your purchase receipt as proof of purchase.

Kontakt informacije se obično mogu pronaći na proizvođačevoj webweb-mjestu ili na ambalaži proizvoda.

10. Videozapisi proizvoda

There are no official product videos from the seller available for this model at this time.