1. Uvod
The weBoost 901117 Pole Mount is designed to provide a secure and stable mounting solution for outdoor antennas, particularly those used with cell phone signal boosters. This durable aluminum pole mount is suitable for installation on building roofs or walls, ensuring optimal placement for your external antenna.
This manual provides essential information regarding the installation, maintenance, and specifications of your weBoost 901117 Pole Mount.
2. Sigurnosne informacije
- Always exercise caution when working at heights, especially on roofs or ladders. Ensure stable footing and use appropriate safety equipment.
- Do not install the pole mount during adverse weather conditions, such as strong winds, rain, or lightning.
- Ensure the mounting surface is structurally sound and can support the weight of the pole mount and the attached antenna, even in windy conditions.
- Avoid contact with power lines or other electrical hazards during installation.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom stručnjaku.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- 1x Pole Mount (10 inches length, 1.5 inches diameter)
- 1x U-Bracket Assembly
- 1x zidni nosač
Figure 3.1: Included components of the weBoost 901117 Pole Mount.
4. Postavljanje i instalacija
The weBoost 901117 Pole Mount is designed for easy installation on various outdoor surfaces. Follow these steps for proper setup:
4.1. Odaberite mjesto za montažu
Select a location on your building's roof or wall that provides the best line of sight for your outdoor antenna. Ensure the surface is flat and strong enough to securely hold the mount and antenna.
Slika 4.1: Prample of pole mount installation on a roof.
4.2. Attach the Wall Mount Bracket
- Position the wall mount bracket against the chosen surface.
- Mark the drilling points through the holes on the bracket.
- Drill pilot holes if necessary, appropriate for your mounting hardware (screws not included).
- Securely fasten the wall mount bracket to the surface using suitable screws or bolts.
4.3. Assemble the Pole and U-Bracket
- Slide the U-bracket assembly onto the pole.
- Insert the pole into the opening of the secured wall mount bracket.
- Align the U-bracket with the wall mount bracket and tighten the nuts on the U-bracket bolts to firmly secure the pole to the wall mount.
Figure 4.2: Assembled pole mount ready for antenna attachment.
4.4. Attach Your Antenna
Once the pole mount is securely installed, attach your outdoor antenna to the top of the pole using the antenna's provided mounting hardware. Ensure the antenna is oriented correctly for optimal signal reception as per its own instruction manual.
Slika 4.3: Prample of an antenna mounted on the pole.
5. Uputstvo za upotrebu
The weBoost 901117 Pole Mount is a passive component designed to provide a stable platform for your outdoor antenna. It does not require any electrical power or active operation. Once installed, its function is to securely hold the antenna in its desired position.
6. Održavanje
To ensure the longevity and continued stability of your pole mount, periodic maintenance is recommended:
- Vizuelni pregled: Annually inspect the pole mount and its connections for any signs of corrosion, loose bolts, or physical damage.
- Zategnite veze: If any bolts or nuts appear loose, carefully re-tighten them to ensure the mount remains secure.
- čistoća: Keep the mount free from excessive dirt, debris, or ice buildup, which could add unnecessary stress.
7. Otkrivanje problema
As a passive component, the pole mount typically does not experience "malfunctions." However, if you encounter issues related to its stability or the performance of your antenna, consider the following:
- Mount is Loose: Check all mounting bolts and nuts. Ensure they are securely tightened. Verify the integrity of the mounting surface.
- Antenna Performance Issues: If your antenna's signal strength has decreased, first check the antenna itself and its connections. Then, inspect the pole mount for any shifting or damage that might have altered the antenna's orientation.
- korozija: While made of durable materials, prolonged exposure to harsh environments can cause corrosion. If significant corrosion is observed, consider replacement to ensure structural integrity.
8. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | 901117 |
| Dimenzije proizvoda (D x Š x V) | 10 inches x 1.5 inches (diameter) |
| Težina artikla | 9.1 unce |
| Materijal | Aluminum (implied from product description and reviews) |
| Proizvođač | Wilson Electronics |
| Uključene komponente | Pole, U-Bracket Assembly, Wall Mount Bracket |
9. Informacije o garanciji
The weBoost 901117 Pole Mount is covered by a 2-godišnja garancija proizvođačaOva garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za potrebe reklamacije.
Za detaljne uslove garancije, molimo Vas da se obratite službenom weBistok websajtu ili kontaktirajte korisničku podršku.
10. Korisnička podrška
For technical assistance, installation questions, or warranty inquiries, please contact weBoost customer support. US-based customer support is available to assist you.
Pogledajte pakovanje proizvoda ili službene weBistok webstranicu za najnovije kontakt informacije.
