Uvod
The MXR Bass Envelope Filter M82 is an analog effect pedal designed specifically for bass guitar, delivering classic envelope filter sounds. It features independent controls for dry and effect signals, allowing for precise blending without sacrificing low-end frequencies. The pedal's wide range of filter tones can be adjusted using the Decay and Q controls, while the Sensitivity knob adapts the pedal's response to your playing dynamics and bass type (passive or active). Built with robust power supply circuitry for protection against voltage issues and true-bypass switching to maintain signal integrity, the M82 is housed in a durable, compact aluminum enclosure.
Ključne karakteristike
- Bypass Footswitch with LED: Engages or disengages the effect, with an LED indicator for status.
- Dry Control: Adjusts the level of the unaffected bass signal.
- FX kontrola: Adjusts the level of the effected signal.
- Decay Control: Shapes the filter's sweep time.
- "Q" Control: Adjusts the filter's resonance or intensity.
- Kontrola osjetljivosti: Tailors the filter's response to playing dynamics and instrument output.
- True Bypass Switching: Preserves original tone when the effect is off.
- Izdržljivo aluminijumsko kućište: Compact and road-ready design.
Vodič za postavljanje
Pokretanje pedale
The MXR Bass Envelope Filter M82 requires an external 9-volt DC power adapter (e.g., Dunlop ECB003) with a center-negative polarity. This pedal does not have an internal battery compartment. Ensure the power source meets the pedal's requirements to prevent damage.
Povezivanje pedale
- Spojite svoju bas gitaru na INPUT priključak na desnoj strani pedale pomoću standardnog instrumentalnog kabla od 1/4 inča.
- Povežite IZLAZ dizalicu s lijeve strane pedale prema vašem amppojačavač ili sljedeću pedalu u vašem signalnom lancu koristeći drugi instrumentalni kabel od 1/4 inča.
- Connect a 9-volt power adapter to the 9V ulazni priključak za napajanje.
slika: Pozadi view of the MXR Bass Envelope Filter M82 pedal. This image highlights the 1/4-inch input jack, the 1/4-inch output jack, and the 9V power input jack, along with regulatory markings. This is where you connect your instrument, ampusisivač i napajanje.
slika: Side view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch output jack. This jack connects to your ampspašivač ili sljedeća pedala u vašem signalnom lancu.
slika: Side view of the MXR Bass Envelope Filter M82 pedal, clearly showing the 1/4-inch input jack. Your bass guitar connects here.
Uputstvo za upotrebu
slika: Top view of the MXR Bass Envelope Filter M82 pedal, displaying all control knobs (Dry, FX, Decay, Q, Sensitivity) and the footswitch with its LED indicator. This is the primary interface for adjusting the pedal's sound.
Kontrole prekoview
- DRY dugme:
- Controls the volume of your unaffected, direct bass signal. Use this to retain your instrument's natural low-end and blend it with the effect.
- FX dugme:
- Controls the volume of the envelope filter effect signal. Adjust this to determine how prominent the filter sound is in your mix.
- DECAY dugme:
- Adjusts the speed at which the filter sweep closes. Turning it clockwise results in a slower, longer sweep, while counter-clockwise settings produce a faster, snappier sweep.
- Q Knob:
- Determines the intensity or resonance of the filter effect. Higher 'Q' settings create a more pronounced, vocal-like "wah" sound, while lower settings are more subtle.
- SENSITIVITY Knob:
- Sets the threshold for the envelope filter's response to your playing dynamics. Adjust this to match your bass's output level (passive or active) and your picking/plucking attack. Turning it clockwise increases sensitivity, making the filter react to lighter playing.
- NOŽNI PREKIDAČ:
- Toggles the effect on and off. The adjacent LED illuminates when the effect is active.
Achieving Desired Tones
- Funk Tones: Start with high Sensitivity, moderate Q, and a fast Decay. Adjust Dry/FX to taste.
- Subtle Filter: Use lower Q and Sensitivity settings, with a higher Dry mix.
- Long Sweeps: Increase the Decay knob for a slower, more drawn-out filter movement.
- Experiment with the Sensitivity knob to find the sweet spot where the filter responds naturally to your playing style and instrument's output.
Održavanje
- čišćenje: Za čišćenje vanjske strane pedale koristite meku, suhu krpu. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
- Skladištenje: Čuvajte pedalu na suhom mjestu, dalje od ekstremnih temperatura i vlage.
- Napajanje: Always use a regulated 9V DC power supply with a center-negative polarity. Using an incorrect power supply can damage the unit.
- Veze: Provjerite jesu li svi kablovi sigurno spojeni kako biste spriječili gubitak signala ili povremeni rad.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema zvuka kada se aktivira pedala. |
|
|
| Effect is too subtle or not responding. |
|
|
| Effect is too harsh or overwhelming. |
|
|
| Loss of low-end frequencies. | Dry knob set too low. | Increase the Dry knob to blend in more of your original bass signal. |
Specifikacije
| Broj modela | M82 |
| Težina artikla | 10.9 unci (približno 309 grama) |
| Dimenzije proizvoda | 6 x 4.5 x 2.5 inča (približno 15.24 x 11.43 x 6.35 cm) |
| Izvor napajanja | 9V DC (external power adapter required, center-negative) |
| Voltage | 9.00V |
| Hardversko sučelje | 1/4-inčni audio ulaz/izlaz |
| Format signala | Analog |
| Materijal kućišta | Izdržljivi aluminij |
| Naziv boje | Ljubičasta |
Garancija i podrška
For warranty information and technical support, please refer to the official MXR webstranicu ili kontaktirajte ovlaštenog prodavača. Sačuvajte račun kao dokaz o kupovini za bilo kakve reklamacije u garanciji.
Online resursi: Visit the official MXR website
