Renkforce 751402 IP65 Touchscreen Keypad Code Lock

1. Uvod

Thank you for choosing the Renkforce 751402 IP65 Touchscreen Keypad Code Lock. This device offers a secure and convenient access control solution, suitable for both indoor and outdoor environments. Its robust, waterproof zinc housing and modern glass surface with white backlighting ensure durability and aesthetic appeal.

This manual provides essential information for the proper installation, operation, and maintenance of your code lock. Please read it thoroughly before use to ensure optimal performance and safety.

Slika: Front view of the Renkforce 751402 IP65 Touchscreen Keypad Code Lock, showcasing its sleek design and illuminated numeric keypad.

2. Sigurnosna uputstva

Da biste spriječili oštećenja ili povrede, pridržavajte se sljedećih sigurnosnih mjera opreza:

• Prije instalacije i rada pažljivo pročitajte sva uputstva.
• Ensure the power supply meets the device's requirements. Incorrect voltage može uzrokovati štetu.
• Do not attempt to open or modify the device. This will void the warranty and may cause malfunction.
• Držite uređaj dalje od jakih elektromagnetnih polja.
• If the device is damaged, do not use it. Contact qualified personnel for repair.
• This product is IP65 rated for water and dust resistance, making it suitable for outdoor use. However, avoid submerging it in water.

3. Sadržaj paketa

Provjerite da li su svi artikli prisutni i u dobrom stanju:

• Renkforce 751402 IP65 Touchscreen Keypad Code Lock Unit (1x)
• Pribor za montažu (vijci, tiple za zid)
• Uputstvo za upotrebu (ovaj dokument)

4. Postavljanje i instalacija

The Renkforce 751402 is designed for surface mounting (on-wall installation). Professional installation is recommended for electrical connections.

1. Odaberite lokaciju: Select a suitable, secure location on a wall, ensuring it is within reach of necessary wiring (power, door strike, alarm, etc.). The IP65 rating allows for outdoor placement.
2. Označite tačke bušenja: Use the device or a template to mark the drilling points for mounting screws on the wall.
3. Izbušite rupe: Izbušite rupe na označenim mjestima i po potrebi umetnite odgovarajuće tiplove.
4. Ožičenje: Connect the necessary wires (power, lock control, alarm output, door contact input) to the terminal block inside the unit. Refer to the wiring diagram provided with the product for specific connections. Ensure power is disconnected during wiring.
5. Montirajte jedinicu: Secure the code lock unit to the wall using the provided screws.
6. Primijeni snagu: Once securely mounted and wired, connect the power supply. The keypad should illuminate, indicating it is ready for operation.

Slika: Ugaona view of the Renkforce 751402 Code Lock, showing its side profile and robust construction suitable for wall mounting.

5. Uputstvo za upotrebu

The Renkforce 751402 features a touchscreen keypad with backlighting for easy operation. It supports up to 99 user codes, offering over 100 million possible code combinations.

5.1. Initial Setup and Master Code

Upon first power-up, the device will be in a default state. You must set a master code to manage user codes and settings. Refer to the specific programming guide included with your product for the exact sequence to set the master code. Typically, this involves entering a default administrator code (e.g., 123456) followed by a programming key, then entering your new master code.

5.2. Dodavanje korisničkih kodova

To add a new user code:

1. Enter the Master Code, followed by the programming key (e.g., '*').
2. Select the option to add a new user code (e.g., '1').
3. Enter the desired new user code (e.g., 4-6 digits).
4. Confirm the user code by entering it again or pressing a confirmation key (e.g., '#').
5. The device will typically provide an audible or visual confirmation of successful programming.

5.3. Opening the Lock

To open the connected lock:

1. Touch the keypad to activate the backlighting.
2. Unesite važeći korisnički kod.
3. Press the confirmation key (e.g., '#').
4. The lock will disengage for a preset duration, allowing access.

5.4. Brisanje korisničkih kodova

To delete a user code, follow a similar process to adding, but select the delete option and enter the specific user code to be removed.

6. Održavanje

The Renkforce 751402 code lock requires minimal maintenance due to its durable construction and IP65 rating.

• čišćenje: Obrišite staklenu površinu mekom,amp cloth. Avoid abrasive cleaners or solvents that could damage the finish or touchscreen.
• inspekcija: Periodically check the mounting screws for tightness and inspect the wiring for any signs of wear or damage.
• Zaštita životne sredine: While IP65 rated, extreme weather conditions (e.g., prolonged direct sunlight, heavy ice buildup) may affect performance. Ensure proper drainage around the unit if installed outdoors.

7. Otkrivanje problema

If you encounter issues with your Renkforce 751402, refer to the following common problems and solutions:

8. Specifikacije

Technical details for the Renkforce 751402 IP65 Touchscreen Keypad Code Lock:

9. Garancija i podrška

Renkforce provides a minimum 2 godine garancije from the date of purchase for this product. This warranty covers defects in materials and workmanship under normal use.

If you experience any issues with your Renkforce 751402 code lock, or require technical assistance, please contact your retailer or the Renkforce customer support team. Have your purchase receipt and product model number (751402) ready when contacting support.