Intermatic EI400WC Electronic Auto-Off Timer

1. Uvod

The Intermatic EI400WC Electronic Auto-Off Timer is designed to provide convenient and energy-efficient control over various electrical loads. This in-wall timer allows for precise countdown timing from 1 second to 24 hours, making it suitable for a wide range of applications including lighting, fans, and appliances. Its user-friendly interface and robust design ensure reliable operation.

2. Sigurnosne informacije

WARNING: Risk of Electric Shock. May result in serious injury or death. Turn power OFF at circuit breaker before installing.

• Instalaciju treba izvršiti kvalificirani električar ili obučeno osoblje.
• Osigurajte da se poštuju svi lokalni i nacionalni električni propisi.
• Do not use with sunlamps, saune ili opterećenja koja bi mogla uzrokovati tjelesne ozljede ako su neispravna.
• Provjerite da li je jačina zvuka tajmeratage and current ratings are compatible with your application.
• Ovaj uređaj je namijenjen samo za upotrebu u zatvorenom prostoru.

3. Sadržaj paketa

• Intermatic EI400WC Electronic Auto-Off Timer
• Montažni vijci
• Žičane matice
• Uputstvo za upotrebu (ovaj dokument)

4. Instalacija

The EI400WC timer is designed for easy installation, compatible with both single-pole and 3-way switch configurations. It does not require a neutral wire connection, simplifying retrofitting.

4.1. Dijagram ožičenja iznadview

Below is an image of the Intermatic EI400WC timer, showing its compact design and wiring leads for installation into a standard wall box.

Figure 1: Intermatic EI400WC Electronic Auto-Off Timer with wiring leads.

4.2. Koraci instalacije

1. Isključite napajanje: Pronađite prekidač koji kontrolira prekidač koji zamjenjujete i isključite ga. Provjerite je li napajanje isključeno pomoću regulatora glasnoće.tage tester.
2. Uklonite postojeći prekidač: Pažljivo uklonite zidnu ploču i odvrnite postojeći prekidač iz zidne kutije. Isključite žice sa starog prekidača.
3. Connect the timer:
   • Connect the timer's wires to the corresponding house wires using the provided wire nuts. Refer to the specific wiring diagram for single-pole or 3-way applications.
   • The EI400WC does not require a neutral wire, simplifying connections.
   • Uvjerite se da su sve veze sigurne.
4. Mount the timer: Gently push the connected wires back into the wall box. Secure the timer to the wall box using the mounting screws.
5. Ugradnja zidne ploče: Attach the new or existing wall plate over the timer.
6. Obnovite napajanje: Ponovo uključite napajanje na prekidaču.

4.3. Video vodič za instalaciju

For a visual guide on installing and setting up Intermatic in-wall timers, including the EI400 series, please watch the following video. The relevant section for programmable electronic timers begins at 0:55.

5. Podešavanje i programiranje

The EI400WC timer offers simple programming for countdown times from 1 second to 24 hours. Settings are stored in a non-volatile memory.

1. Setting the Countdown Time: Use the '+' and '-' buttons on the timer to adjust the desired countdown duration. The digital display will show the selected time.
2. Aktiviranje tajmera: Press the 'on/off' button once to activate the countdown. The connected load will turn ON and remain on for the programmed duration.
3. Audible/Visual Warning: The timer can be configured to provide a visual or audible warning before the countdown expires and the load turns OFF. Refer to the detailed manual for specific warning setup.
4. Lockable Settings: To prevent unintended changes to the programmed settings, the timer features a lockable setting. Consult the full manual for instructions on enabling/disabling this feature.

6. Uputstvo za upotrebu

• Starting a Countdown: Once the desired time is set, press the 'on/off' button to begin the countdown. The load will turn ON.
• Stopping the Countdown Early: If you wish to turn off the connected load before the programmed time expires, simply press the 'on/off' button again. The load will turn OFF immediately.
• Pauziranje tajmera: The 'pause' button allows you to temporarily halt the countdown. Press it once to pause, and again to resume.

7. Održavanje

The Intermatic EI400WC timer is designed for minimal maintenance. The internal CR2 lithium battery provides power for up to three years and is replaceable.

7.1. Zamjena baterije

1. Isključite napajanje: For safety, turn off power to the timer at the circuit breaker before replacing the battery.
2. Access battery compartment: Locate the battery compartment, usually behind a small cover on the front or side of the timer.
3. Zamijenite bateriju: Remove the old CR2 lithium battery and insert a new one, ensuring correct polarity.
4. Close compartment: Sigurno zatvorite poklopac odjeljka za baterije.
5. Obnovite napajanje: Ponovo uključite napajanje na prekidaču.

8. Otkrivanje problema

If the problem persists after attempting these solutions, please contact Intermatic customer support.

9. Specifikacije

• Model: EI400WC
• Voltage: 120-277 VAC
• Trenutna ocjena: Do 20 Amps
• Raspon vremena: 1 sekunda do 24 sata
• baterija: 1 x CR2 Lithium (included, replaceable)
• Materijal: Plastika
• Boja: Bijelo
• Dimenzije: 4.13 x 1.75 x 1.2 inča (dimenzije proizvoda)
• Težina: 6.08 unce
• Kompatibilnost: Single-pole or 3-way switch compatible
• Certifikati: CSA Certified

10. Garancija i podrška

The Intermatic EI400WC Electronic Auto-Off Timer comes with a 5 godine ograničene garancije od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi i servisiranju.

For warranty claims, technical support, or further assistance, please visit the official Intermatic webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte dokaz o kupovini radi potvrde garancije.

Intermatic Official Webstranica: www.intermatic.com