Intermatic EI400C

Intermatic EI400C Electronic Countdown In-Wall Timer User Manual

Model: EI400C

1. Uvod

The Intermatic EI400C Electronic Countdown In-Wall Timer is designed to provide automatic shut-off functionality for various electrical loads, including indoor and outdoor lighting, bathroom fans, whole house fans, and other appliances. This timer offers precise control from 1 second to 24 hours, enhancing convenience and energy efficiency in your home or office. Its silent operation and simple push-button interface make it user-friendly, while its no-neutral wire requirement simplifies installation in most standard wall boxes.

2. Važne informacije o sigurnosti

UPOZORENJE: Opasnost od strujnog udara. Nepravilna instalacija može dovesti do ozbiljnih povreda ili smrti.

  • Always turn off power at the circuit breaker or fuse box before installing or servicing the timer.
  • Installation should be performed by a qualified electrician or in accordance with all local and national electrical codes.
  • Do not use this timer with sunlamps, saunas, or any loads that could cause personal injury if timed incorrectly or if the timer malfunctions.
  • Osigurajte da su svi spojevi žica sigurni i pravilno izolirani.
  • Ovaj uređaj je namijenjen samo za upotrebu u zatvorenom prostoru.

3. Proizvod je gotovview

The Intermatic EI400C is an electronic countdown timer designed for in-wall installation. It features a digital display and intuitive controls for setting countdown durations.

3.1 Komponente

  • Digitalni prikaz: Shows current time and countdown status.
  • Dugme za uključivanje/isključivanje: Activates or deactivates the timer.
  • Dugmad Plus (+) / Minus (-): Adjust countdown duration.
  • Dugme za pauzu: Temporarily stops the countdown.
  • Pretinac za baterije: Houses the CR2 lithium battery.

3.2 Slike proizvoda

Intermatic EI400C Timer installed with wall plate
Slika 1: Intermatic EI400C Electronic Countdown Timer installed in a wall plate, showing the digital display.
Front view of Intermatic EI400C Timer without wall plate
Slika 2: Front view of the EI400C timer module, revealing its compact design before wall plate installation.
Side view of Intermatic EI400C Timer showing wiring details
Slika 3: Side view of the EI400C timer, illustrating the wiring terminals and load ratings printed on the side.
Intermatic EI400C Timer with front cover open, revealing control buttons
Slika 4: The EI400C timer with its front cover opened, exposing the 'pause', 'on/off', and adjustment buttons for programming.

4. Postavljanje i instalacija

The Intermatic EI400C timer is designed for easy installation, compatible with single-pole or 3-way switch configurations and does not require a neutral wire connection.

4.1 Koraci prije instalacije

  1. Isključite napajanje: Locate the circuit breaker or fuse that controls the switch you are replacing and turn off the power. Verify power is off using a voltage tester.
  2. Uklonite postojeći prekidač: Pažljivo uklonite zidnu ploču i odvrnite postojeći prekidač iz zidne kutije. Isključite žice sa starog prekidača.

4.2 Upute za ožičenje

The EI400C timer is compatible with both single-pole and 3-way switch setups. Refer to the diagram provided with your product for specific wiring configurations. Generally, the timer will have two load wires and a ground wire. For 3-way applications, one of the traveler wires from the existing 3-way switch will be connected to the timer.

  • Connect the timer's wires to the corresponding house wires using wire nuts.
  • Uvjerite se da su svi spojevi čvrsti i sigurni.
  • The EI400C does not require a neutral wire, simplifying installation in older homes.

4.3 Mounting and Finalizing Installation

  1. Pažljivo gurnite žičani tajmer u zidnu kutiju.
  2. Secure the timer to the wall box with the provided screws.
  3. Attach the decorative wall plate.
  4. Vrati snagu: Ponovo uključite struju na prekidaču.

4.4 Instalacija baterije

The timer comes with a replaceable CR2 lithium battery, which powers the internal clock and settings memory. The battery is typically pre-installed or needs to be inserted upon initial setup.

  • Open the small front cover of the timer to access the battery compartment.
  • Insert the CR2 lithium battery, observing the correct polarity.
  • Čvrsto zatvorite poklopac odeljka za baterije.

5. Uputstvo za upotrebu

The EI400C timer offers simple, push-button operation for setting countdown durations from 1 second to 24 hours.

5.1 Setting a Countdown Time

  1. Kontrole pristupa: Gently open the front cover of the timer to reveal the control buttons.
  2. Podesite vrijeme: Koristite + i - buttons to set the desired countdown duration. The display will show the selected time.
  3. Tajmer za početak: Pritisnite On/Off button to activate the timer. The connected load will turn on, and the timer will begin counting down.

5.2 Turning Off Before Countdown Ends

If you wish to turn off the connected load before the set countdown time expires, simply press the On/Off button again. This will immediately turn off the load and reset the timer.

5.3 Funkcija pauze

Pritisnite Pauza button to temporarily halt the countdown. The connected load will remain on. Press Pauza ponovo za nastavak odbrojavanja.

5.4 Lockable Settings

The timer features lockable settings to prevent unintended changes to the program. Refer to the detailed instructions included in the product packaging for how to activate and deactivate this feature.

5.5 Visual/Audible Warnings

The EI400C can be configured to provide a visual or audible warning before the timer turns off. Consult the full product manual for steps on enabling and customizing these warning options.

5.6 Instrukcijski video

Klip 1: An official Intermatic video providing an overview of their in-wall timers, including the EI400 series. This video demonstrates general features and benefits of Intermatic in-wall timers, which are applicable to the EI400C model.

6. Održavanje

The Intermatic EI400C timer requires minimal maintenance, primarily focusing on battery replacement.

6.1 Zamjena baterije

The internal CR2 lithium battery provides power for the timer's memory and display, typically lasting up to three years. When the battery is low, a 'LoBatt' indicator may appear on the display.

  1. Open the front cover of the timer.
  2. Carefully remove the old CR2 battery from its compartment.
  3. Umetnite novu CR2 litijumsku bateriju, pazeći na ispravan polaritet.
  4. Čvrsto zatvorite prednji poklopac.

Napomena: Some users have reported that the battery compartment cover can be difficult to open or may not stay securely closed after multiple battery changes. Exercise care when opening and closing the compartment. If the cover does not stay closed, ensure the battery makes proper contact.

7. Otkrivanje problema

This section addresses common issues you might encounter with your Intermatic EI400C timer.

ProblemMogući uzrokRješenje
Timer display is blank or shows 'LoBatt'Low or dead CR2 battery, or poor battery contact.Replace the CR2 lithium battery. Ensure the battery is inserted correctly and the compartment cover is securely closed to maintain contact.
Timer shows 'NoOP' errorIndicates a problem with battery contact or internal operation.Check and re-seat the CR2 battery. If the issue persists, the unit may require replacement.
Connected load does not turn on/offNo power to the timer, incorrect wiring, or faulty load.Verify power at the circuit breaker. Double-check wiring connections according to the installation instructions. Test the connected load (e.g., light bulb) with a different switch or power source.
Difficulty opening battery compartment coverTight fit or worn plastic tabs.Use a small, flat-head screwdriver to gently pry open the cover. Be careful not to damage the plastic tabs.
Timer does not hold settings after power outageDead or missing CR2 battery.The CR2 battery maintains settings during power outages. Ensure it is installed and functional.

8. Specifikacije

FeatureDetalj
Broj modelaEI400C
BrandIntermatic
BojaIvory
MaterijalPlastika
Voltage120-277 VAC
Maksimalno opterećenje20 Amps
Tajmer Range1 sekunda do 24 sata
Tip prekidačaJednopolni ili trosmjerni
Vrsta montažeStandard Wall Box, Rectangular Decorator Wall Plate
Potrebna baterija1 CR2 Lithium (included)
Trajanje baterijeDo 3 godina
Dimenzije4.13 x 1.75 x 1.2 inča
Težina artikla6 unce (0.38 funte)
CertifikacijaCSA Certified
UPC078275101371

9. Jamstvo i podrška

9.1 Informacije o garanciji

The Intermatic EI400C Electronic Countdown In-Wall Timer comes with a 5 godine ograničene garancijeOva garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za potrebe reklamacije.

9.2 Korisnička podrška

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic webnajnovije kontakt informacije potražite na web stranici ili na pakovanju proizvoda.

Online resursi: Posjetite Intermatic prodavnica na Amazonu za dodatne informacije o proizvodu i resurse.

Povezani dokumenti - EI400C

Preview Intermatic HB880R Vanjski 7-dnevni digitalni tajmer: Upute za upotrebu i vodič za podešavanje
Sveobuhvatno korisničko uputstvo za Intermatic HB880R vanjski digitalni sedmodnevni tajmer. Naučite kako instalirati, programirati, postaviti rasporede i riješiti probleme s ovim svestranim vremenskim prekidačem.
Preview Intermatic EI200 Elektronski zidni tajmer za odbrojavanje - Uputstvo za instalaciju i upotrebu
Detaljan vodič za Intermatic EI200 elektronski ugradbeni tajmer za odbrojavanje. Obuhvata karakteristike, nazivne vrijednosti, korake instalacije, načine rada (režim tajmera, režim zadržavanja) i ograničenu garanciju od 1 godine. Uključuje dijagrame ožičenja i sigurnosna upozorenja.
Preview Intermatic ET8215C Elektronski tajmer - Tehnički podaci
Detaljne tehničke specifikacije za Intermatic ET8215C elektronski tajmer, astronomski 7-dnevni, 2-kružni elektronski regulator pogodan za primjene od 120-277 VAC u zatvorenom metalnom kućištu.
Preview Intermatic EI400 Series Digital Auto Shut-Off Timer: Installation and User Instructions
Comprehensive installation and user guide for the Intermatic EI400 Series Digital Auto Shut-Off Timer. Learn how to install, set up, and troubleshoot this electronic timer for controlling lights and appliances, with detailed wiring instructions and operational tips.
Preview Intermatic ST01 serija digitalnih zidnih tajmera - Specifikacije i karakteristike
Detaljne specifikacije, karakteristike, ocjene i dijagrami instalacije za Intermatic ST01 seriju digitalnih zidnih tajmera. Tajmeri koji se lako programiraju s astronomskim funkcijama za prebacivanje pri izlasku i zalasku sunca.
Preview Intermatic EJ351 Zidni prekidač s tajmerom za unutarnju upotrebu: Upute za instalaciju i upotrebu
Ovaj dokument pruža upute za instalaciju i korištenje Intermatic EJ351 unutarnjeg zidnog tajmera. Obuhvata specifikacije, ožičenje, metode programiranja (brzo i 24-satno), svakodnevnu upotrebu, rješavanje problema i ograničenu jednogodišnju garanciju.