3M Sistem fabrike vode FM-1500 05-61002 Uputstvo za upotrebu sistema za pitku vodu

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the 3M Water Factory System FM-1500 05-61002 Drinking Water System. Please read this manual thoroughly before attempting to install or operate the system. Retain this manual for future reference.

The 3M Water Factory System FM-1500 is designed to provide cleaner, better-tasting water by reducing lead, sediment, asbestos, cysts, and chlorine. It features a sanitary quick-change design for ease of use.

2. Sigurnosne informacije

UPOZORENJE: Ovaj proizvod sadrži hemikalije za koje je u državi Kaliforniji poznato da uzrokuju rak i urođene mane ili druge reproduktivne štete. Za više informacija posjetite www.P65Warnings.ca.gov.

• Always follow local plumbing codes and regulations during installation.
• Nemojte koristiti s vodom koja je mikrobiološki nesigurna ili nepoznatog kvaliteta bez adekvatne dezinfekcije prije ili poslije sistema.
• Osigurajte da su svi spojevi sigurni kako biste spriječili curenje.
• Ne izlažite sistem temperaturama smrzavanja.
• Use only genuine 3M replacement filters to ensure proper performance and to avoid voiding the warranty.

3. Postavljanje i instalacija

The 3M Water Factory System FM-1500 is an under-sink drinking water system. Professional installation is recommended. Ensure adequate space is available under the sink for the unit, which measures approximately 18.25 x 3.5 x 3.5 inches.

3.1 Uključene komponente

• DRINKING WATER FILTRATION SYSTEM (main unit)
• Installation hardware (may vary, refer to packaging)

3.2 Koraci instalacije (Opće smjernice)

1. Isključite dovod vode: Pronađite i zatvorite ventil za dovod hladne vode ispod sudopera.
2. Install faucet (if applicable): If a dedicated faucet is included, install it according to its specific instructions.
3. Mount the filter head: Securely mount the filter head assembly to the cabinet wall under the sink using appropriate fasteners.
4. Spojite vodovodne cijevi: Connect the cold water supply line to the inlet of the filter head and the filtered water line to the faucet. Ensure all connections are tight.
5. Insert filter cartridge: Align the filter cartridge with the filter head and twist until it locks into place. The sanitary quick-change design allows for easy, mess-free replacement.
6. Isperite sistem: Slowly turn on the cold water supply. Open the filtered water faucet and allow water to run for several minutes (e.g., 5-10 minutes) to flush out air and carbon fines.
7. Provjerite ima li curenja: Pregledajte sve spojeve na bilo kakve znakove curenja.

4. Uputstvo za upotrebu

Once installed and flushed, the 3M Water Factory System FM-1500 operates automatically when the filtered water faucet is opened. For optimal performance, adhere to the following guidelines:

• Početna upotreba: After installation or filter replacement, run water through the system for 5-10 minutes to ensure proper flushing.
• Svakodnevna upotreba: Use the dedicated filtered water faucet for drinking and cooking.
• Brzina protoka: The system is designed for a flow rate of 1.5 gallons per minute (GPM).
• pritisak: Operate within a pressure range of 25-125 PSI (172-862 kPa).
• temperatura: The maximum operating temperature is 100°F (38°C). Do not use with hot water.

5. Održavanje

Regular maintenance ensures the continued performance and longevity of your 3M Water Factory System FM-1500.

5.1 Zamjena filter uloška

The filter cartridge has a capacity of 1,500 gallons (5,678 liters) or should be replaced every 6 months, whichever comes first. Replacement is crucial for maintaining water quality.

1. Isključite dovod vode: Isključite dovod hladne vode u sistem.
2. Smanjite pritisak: Open the filtered water faucet to relieve pressure.
3. Uklonite stari kertridž: Twist the old filter cartridge counter-clockwise to unlock and remove it. The sanitary quick-change design minimizes contact with used filter media.
4. Install new cartridge: Remove protective covers from the new 3M replacement cartridge. Align the new cartridge with the filter head and twist clockwise until it locks securely into place.
5. Restore water supply: Polako uključite dovod hladne vode.
6. Isperite sistem: Open the filtered water faucet and run water for 5-10 minutes to flush the new filter.
7. Provjerite ima li curenja: Inspect for any leaks around the new cartridge.

5.2 Čišćenje

Periodically wipe down the exterior of the system with a clean, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.

6. Otkrivanje problema

This section addresses common issues you might encounter with your drinking water system.

• Nizak protok vode:
  • Check if the cold water supply valve is fully open.
  • The filter cartridge may be clogged or at the end of its service life. Replace the filter.
  • Ensure there are no kinks in the water lines.
• Neobičan okus ili miris:
  • The filter cartridge may need replacement.
  • Ensure the system was properly flushed after installation or filter change.
• curenja:
  • Odmah isključite dovod vode.
  • Provjerite jesu li svi priključci nepropusni.
  • Ensure the filter cartridge is correctly seated and locked into the filter head.

If problems persist after following these steps, contact 3M customer support.

7. Specifikacije

8. Garancija i podrška

For warranty information and customer support, please refer to the documentation included with your product or visit the official 3M website. Također možete posjetiti 3M prodavnica na Amazonu za dodatne resurse.