1. Sigurnosne informacije
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating power tools. Read and understand all instructions before using the AEG WS6-115 Angle Grinder.
Opšta sigurnosna upozorenja za električni alat
- Sigurnost radnog područja: Održavajte svoje radno mjesto čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
- električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne mijenjajte utikač ni na koji način. Ne koristite adaptere za utikače s uzemljenim električnim alatima. Izbjegavajte kontakt tijela s uzemljenim površinama kao što su cijevi, radijatori, šporeti i frižideri.
- Lična sigurnost: Uvijek nosite zaštitu za oči. Koristite zaštitne naočale, zaštitne naočale ili štitnik za lice. Nosite zaštitu za sluh prilikom dužeg rada s alatom. Obucite se prikladno; ne nosite široku odjeću ili nakit. Držite kosu, odjeću i rukavice dalje od pokretnih dijelova.
- Upotreba i njega alata: Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn it on and off. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
Sigurnosna upozorenja specifična za kutne brusilice
- Always use the protective guard provided with the tool. Ensure it is securely attached and positioned for maximum safety.
- Use only grinding or cutting discs that are rated for the speed of the grinder and are in good condition. Inspect discs for cracks or damage before each use.
- Hold the tool firmly with both hands, using the auxiliary handle, to maintain control during operation.
- Be aware of kickback, which is a sudden reaction to a pinched or snagged rotating wheel. Always position your body to avoid being in line with the rotating wheel.
- Do not use the grinder for applications for which it is not intended, such as sanding with large diameter sanding discs.
2. Proizvod je gotovview
The AEG WS6-115 Angle Grinder is a robust corded electric tool designed for various grinding and cutting tasks. Familiarize yourself with its components before operation.
This image displays the AEG WS6-115 Angle Grinder along with its standard accessories. Visible components include the orange and black grinder unit, a grey protective guard, a black auxiliary side handle, a spanner wrench for disc changes, and printed user manuals.
Ključne komponente
- Grinder Unit: The main body housing the motor and gearhead.
- Zaštitnik: Essential for deflecting sparks and debris.
- pomoćna ručka: Pruža dodatni hvat i kontrolu.
- Ključ ključ: Used for tightening and loosening the locking nut when changing discs.
- Kabl za napajanje: Za spajanje na električnu utičnicu.
3. Podešavanje
Pravilno podešavanje je ključno za siguran i efikasan rad.
Attaching the Protective Guard
- Provjerite je li brusilica isključena iz izvora napajanja.
- Place the protective guard onto the gear housing collar.
- Rotate the guard to the desired position to protect against sparks and debris, ensuring it covers the maximum possible area of the disc.
- Tighten the guard's clampsigurno zavrtanje.
Mounting the Grinding/Cutting Disc
- Provjerite je li mlin isključen iz struje.
- Pritisnite i držite dugme za zaključavanje vretena.
- Postavite unutrašnju prirubnicu na vreteno.
- Postavite brusnu ili reznu ploču na unutrašnju prirubnicu, pazeći da bude ravno postavljena.
- Screw the outer locking nut onto the spindle.
- While still holding the spindle lock button, use the spanner wrench to firmly tighten the locking nut.
Pričvršćivanje pomoćne ručke
The auxiliary handle can be screwed into either side of the gear housing, depending on user preference and application. Ensure it is tightened securely before use.
4. Uputstvo za upotrebu
Follow these guidelines for safe and effective operation of your angle grinder.
Uključivanje/isključivanje
- Uključiti: Plug the tool into a suitable power outlet. Press the ON/OFF switch.
- Ugasiti: Otpustite prekidač za uključivanje/isključivanje.
Tehnike brušenja i rezanja
- Always allow the disc to reach full speed before contacting the workpiece.
- For grinding, hold the tool at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool smoothly across the surface.
- For cutting, hold the tool perpendicular to the workpiece. Make straight cuts without twisting or bending the disc. Do not apply excessive side pressure to the cutting disc.
- Čvrsto pričvrstite radni komad kako biste spriječili pomicanje tokom rada.
- Izbjegavajte preopterećenje alata. Ako motor značajno uspori, smanjite pritisak.
5. Održavanje
Redovno održavanje osigurava dugotrajnost i siguran rad vaše kutne brusilice.
- čišćenje: Keep the ventilation openings clean to prevent motor overheating. Regularly clean dust and debris from the tool using compressed air or a soft brush.
- Zamjena diska: Replace worn or damaged grinding/cutting discs immediately. Always use the correct type and size of disc for your application.
- Pregled strujnog kabla: Periodically inspect the power cord for damage. If damaged, have it repaired by a qualified service technician.
- Inspekcija četkica: Carbon brushes may need replacement after extended use. This should be performed by a qualified service center.
- Skladištenje: Alat čuvajte na suhom i sigurnom mjestu, van dohvata djece.
6. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Alat se ne pokreće | Nema napajanja; Oštećen kabel za napajanje; Neispravan prekidač | Check power outlet and connections; Inspect power cord for damage; Contact service center for switch replacement. |
| Pretjerane vibracije | Damaged or unbalanced disc; Loose locking nut; Worn bearings | Replace disc; Tighten locking nut; Contact service center for bearing inspection. |
| Poor grinding/cutting performance | Worn or incorrect disc; Insufficient pressure | Replace with a new, appropriate disc; Apply moderate, consistent pressure. |
| Pregrijavanje | Začepljeni ventilacijski otvori; Preopterećenje alata | Clean ventilation slots; Reduce load and allow tool to cool. |
7. Specifikacije
Technical data for the AEG WS6-115 Angle Grinder.
- Brand: AEG
- Broj modela: WS6-115 (Part Number: 4935413250)
- Vrsta izvora napajanja: Corded Electric
- Wattage: 670 Watts
- Težina artikla: 1.9 kilograma
- Materijal: Metal
- Stil: Ugao
- Boja: Narandžasta
- Dimenzije paketa: 35.2 x 12 x 11.8 cm
- Specifične upotrebe: Profesionalno
- Uključene komponente: Grinder
- Potrebne baterije: br
- Baterije uključene: br
- Globalni broj trgovinske jedinice (GTIN): 04002395197699
- Prvi dostupan datum: 7. avgusta 2012
- Ukinuo proizvođač: br
8. Garancija i podrška
For warranty information and customer support, please refer to the documentation included with your product or visit the official AEG Power Tools webSačuvajte račun kao dokaz o kupovini u slučaju bilo kakvih reklamacija.
Proizvođač: AEG
For technical assistance or service, contact an authorized AEG service center.