LUX Pro PSD010B Mechanical Non-Programmable Thermostat User Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD010B Mechanical Non-Programmable Thermostat. This thermostat is designed for use with 1 Heat Only systems, including fireplaces, stoves, and in-floor radiant heating. It does not require a fan switch and is battery-powered for reliable operation.

Slika 1.1: Front view of the LUX Pro PSD010B Thermostat, displaying a temperature of 72 degrees Fahrenheit on its digital screen, along with up and down arrow buttons for temperature adjustment.

Slika 1.2: The LUX Pro PSD010B Thermostat mounted on a wall in a contemporary living room, demonstrating its discreet integration into a home environment.

2. Sigurnosne informacije

• Uvijek isključite napajanje sistema grijanja na glavnoj razvodnoj ploči s osiguračima ili prekidačima prije instalacije ili servisiranja termostata.
• Ovaj termostat je dizajniran za niske naponetage (24V) heating systems or millivolt systems. Do not use with line voltage (120V/240V) sistemi.
• Osigurajte da su svi spojevi ožičenja sigurni i da su u skladu s lokalnim električnim propisima.
• Odložite baterije u skladu s lokalnim propisima. Ne spaljujte baterije.

3. Sadržaj paketa

Provjerite da li vaš paket sadrži sljedeće stavke:

Slika 3.1: Visual representation of the items included in the product box: the PSD010B thermostat, two AA LR6 batteries, two ST screws, two wall anchors, and wire labels.

• LUX Pro PSD010B Thermostat
• 2 AA LR6 baterije
• 2 Mounting Screws (ST screws)
• 2 zidna sidra
• Žičane naljepnice
• Uputstvo za upotrebu (ovaj dokument)

4. Instalacija

4.1 Kontrolna lista pred instalaciju

• Ensure your heating system is compatible (see Section 6: System Compatibility).
• Gather necessary tools: Phillips screwdriver, wire strippers (if needed), drill (if installing wall anchors).
• Turn off power to your heating system at the circuit breaker or fuse box.

4.2 Uklanjanje starog termostata

1. Turn off the power to your heating system.
2. Skinite poklopac starog termostata.
3. Note the wire connections. This thermostat is designed for 2-wire heat-only systems. Label the wires (e.g., R and W) using the provided wire labels.
4. Isključite žice i uklonite staru bazu termostata sa zida.

4.3 Montiranje novog termostata

1. Separate the front cover from the thermostat base.
2. Position the thermostat base on the wall where the old thermostat was located. Ensure it is level.
3. Mark the mounting holes. If new holes are required, drill pilot holes and insert wall anchors if mounting into drywall.
4. Pričvrstite bazu termostata na zid pomoću priloženih vijaka.

4.4 Ožičenje

The PSD010B is compatible with 2-wire heat-only systems. Connect the wires from your heating system to the terminals on the thermostat base. Typically, these are R (power) and W (heat call) wires. Ensure connections are tight.

4.5 Instalacija baterije

1. Umetnite dvije AA baterije u odjeljak za baterije na stražnjoj strani termostata, pazeći na ispravan polaritet (+/-).
2. Pričvrstite prednji poklopac na bazu termostata.
3. Restore power to your heating system at the main fuse or circuit breaker panel.

5. Operacija

5.1 Display and Controls Overview

Slika 5.1: Diagram illustrating the controls of the LUX Pro PSD010B Thermostat, highlighting the large backlit display, quick and easy temperature change buttons (up/down arrows), and the Heat/Off mode slide switch on the side.

• Digitalni prikaz: Shows the current room temperature and the set temperature. It is backlit for easy reading.
• Dugmad za gore/dolje: Koristi se za podešavanje željene temperature.
• Mode Slide Switch: Located on the side of the thermostat. Select 'HEAT' for heating operation or 'OFF' to turn the system off.

5.2 Postavljanje temperature

Da biste podesili željenu temperaturu, koristite Up or Dole arrow buttons. The display will show the set temperature as you adjust it, then revert to showing the current room temperature after a few seconds. The thermostat will automatically activate your heating system when the room temperature falls below your set temperature.

5.3 Odabir načina rada

Use the slide switch on the side of the thermostat to select the operating mode:

• TOPLOTA: Termostat će kontrolirati vaš sistem grijanja kako bi održao zadanu temperaturu.
• ISKLJUČENO: The heating system will remain off.

5.4 Fahrenheit/Celsius Selection

The thermostat allows selection between Fahrenheit and Celsius temperature display. Refer to the detailed specifications or the full manual for instructions on how to switch this setting, typically involving a button combination or a switch on the circuit board.

5.5 Adjustable Temperature Limits

The thermostat features adjustable temperature limits, allowing you to set a minimum and maximum temperature range. This prevents the temperature from being set too high or too low. Consult the full manual for instructions on how to configure these limits.

6. Kompatibilnost sistema

The LUX Pro PSD010B thermostat is designed for specific heating systems. Please review the compatibility information below before installation.

Slika 6.1: A chart detailing the system compatibility of the LUX Pro PSD010B Thermostat. It is compatible with 2-wire Hydronic (Hot Water), 750 Millivolt, and Gas Fireplaces (24V). It is not compatible with Heat Pump Multistage, Radiant Ceiling Heat, Electric Baseboards, Heat Pump w/ Auxiliary Heat, Portable space heaters, 3-wire Hydronic (Hot Water), Gas/Oil/Electric Furnace - Multistage, Cool Multistage, Cooling only, Plug-in air conditioners, Heat Pump w/o Auxiliary Heat, Gas/Oil/Electric Furnace - Heating only, and Gas/Oil/Electric Furnace - Single Stage.

Compatible Systems (Heat Only - 24V or Millivolt)

• 2-wire Hydronic (Hot Water) systems
• 750 Millivolt systems (e.g., gas fireplaces, floor furnaces)
• Plinski kamini (24V)

Nije kompatibilno sa

• Višenamjenski sistemi za toplinske pumpetage sistemi
• Zračno stropno grijanje
• Električne lajsne
• Toplotna pumpa sa pomoćnim grijanjem
• Prijenosne grijalice za prostor
• 3-wire Hydronic (Hot Water) systems
• Plinska/Uljna/Električna Peć - Multistage
• Kul Multistage sistemi
• Cooling only systems
• Klima uređaji koji se priključuju na utičnicu
• Toplotna pumpa bez pomoćnog grijanja
• Gas/Oil/Electric Furnace - Heating only (if it requires a fan control)
• Plinska/Uljna/Električna Peć - Jednostruka Stage (if it requires a fan control)

7. Održavanje

7.1 Zamjena baterije

The thermostat is powered by two AA batteries. When the battery power is low, a low battery indicator will appear on the display. Replace batteries annually or when the low battery indicator appears to ensure continuous operation.

1. Gently pull the bottom of the thermostat cover forward to release it from the base.
2. Uklonite stare AA baterije.
3. Umetnite dvije nove AA alkalne baterije, pazeći na ispravan polaritet.
4. Snap the cover back onto the thermostat base.

7.2 Čišćenje

Očistite vanjski dio termostata mekom,amp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače. Izbjegavajte prskanje tekućina direktno na termostat.

8. Otkrivanje problema

9. Specifikacije

Slika 9.1: A detailed list of features for the LUX Pro PSD010B Thermostat, including digital, non-programmable operation, battery power, temperature range of 40°F to 90°F, clean design, large backlit display, easy installation, F/C selectable display, 5-minute minimum run/off time, and adjustable temperature stop.

• Model: PSD010B
• Vrsta: Mechanical, Non-Programmable
• Kompatibilnost sistema: 1 Heat Only (2-wire Hydronic, 750 Millivolt, 24V Gas Fireplaces)
• Izvor napajanja: 2 AA baterija (uključeno)
• Raspon temperature: 40°F do 90°F (4°C do 32°C)
• Vrsta prikaza: Digitalni LCD sa pozadinskim osvjetljenjem
• Vrsta kontrole: Button Control (Up/Down arrows), Slide Switch (Heat/Off)
• Dimenzije: 1.13"D x 5"Š x 3.5"H
• Težina artikla: 0.4 funte (6.4 unce)
• Voltage: 24 Volts (compatible with millivolt systems)
• Materijal: Plastika
• Vrsta montaže: Zidni nosač
• UPC: 021079070107

10. Garancija i podrška

Termostat LUX Pro PSD010B dolazi sa 5-godišnja ograničena garancija, ensuring reliable performance and peace of mind. For warranty claims, technical assistance, or further inquiries, please refer to the contact information provided with your product packaging or visit the official LUX website.

Slika 10.1: The LUX Pro PSD010B Thermostat displayed with icons highlighting its key features: a backlit display, adjustable temperature limits, battery-only power, and a 5-year limited warranty.