APC Smart-UPS 750VA (SMT750) Instruction Manual

1. Uvod i krajview

The APC Smart-UPS 750VA (SMT750) is an Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for your electronic devices. Featuring pure sine wave output, it ensures compatibility with active PFC power supplies and sensitive electronics. This 120V unit offers 750VA / 500W capacity, safeguarding your equipment against power disruptions and ensuring continuous operation during power outages.

2. Značajke proizvoda

• 750VA / 500W Battery Backup: Pruža esencijalnu energiju tokom vannastavnih aktivnosti.tages to protect connected equipment.
• Izlaz čistog sinusnog vala: Ensures the highest degree of compatibility with active Power Factor Correction (PFC) power supplies and sensitive electronics, delivering clean and stable power.
• 6 Battery Backup and Surge Protector Outlets: Offers comprehensive protection for multiple devices.
• Smart UPS with LCD Display: Provides real-time status updates and configuration options directly on the unit.
• Network-Grade Power Conditioning: Protects from damaging surges and disruptive noise.
• Solid State Automatic Voltage Regulacija (AVR): Boosts low input voltage and trims high voltage without relying on battery operation, preserving battery life.
• Network Manageable: Connectivity via serial, USB, or optional Ethernet for remote monitoring and management.
• Line Interactive Topology: Efficient and reliable power protection.
• Note: This SMT750 model is not sold in Vermont.

3. Upute za postavljanje

Follow these steps to set up your APC Smart-UPS SMT750 for optimal performance.

1. Raspakujte UPS: Pažljivo izvadite UPS i svu dodatnu opremu iz ambalaže. Pregledajte da li ima oštećenja prilikom transporta.
2. Spojite bateriju: The UPS is shipped with the battery disconnected for safety. Locate the battery connector on the rear panel. Remove the protective cap from the battery connector. Connect the battery cable to the battery connector. Ensure a secure connection.
3. Connect Equipment to UPS Outlets: Plug your critical electronic devices (computers, monitors, network equipment) into the 'Battery Backup + Surge' outlets. For devices that only require surge protection (e.g., printers, scanners), use the 'Surge Only' outlets.
4. Povežite se na Utility Power: Plug the UPS power cord into a grounded 120V AC wall outlet.
5. Početna naplata: Allow the UPS to charge for at least 24 hours before initial use to ensure maximum runtime capacity. The LCD display will indicate the battery charge level.
6. Uključite UPS: Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, showing the current status.

4. Uputstvo za upotrebu

Once set up, your APC Smart-UPS SMT750 operates largely automatically. The LCD display provides crucial information and allows for basic configuration.

• Normalan rad: When utility power is present, the UPS charges its battery and provides surge-protected power to connected devices. The LCD will show 'On Line' status.
• Rad baterije: Tokom napajanjatage, the UPS automatically switches to battery power, providing uninterrupted power to connected devices. An audible alarm may sound, and the LCD will indicate 'On Battery' status and estimated runtime.
• LCD ekran: Use the display buttons to cycle through various information screens, including input/output voltage, procenat opterećenjatage, battery charge level, and estimated runtime.
• Upravljanje mrežom: For advanced monitoring and management, connect the UPS to your network via the USB or serial port, or an optional Ethernet card. Install the PowerChute software (available from APC) on your computer for detailed control and graceful shutdown capabilities.
• Zaštita od preopterećenja: If the UPS is overloaded, it will sound an alarm and may shut down. Reduce the load by unplugging non-essential devices and press the 'Overload Protector' button on the rear panel to reset.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i pouzdanost vašeg UPS-a.

• Zamjena baterije: The internal 12V lead-acid battery has a finite lifespan. When the battery needs replacement, the UPS will indicate this on the LCD. Refer to the APC website or contact support for compatible replacement battery cartridges (RBCs). Battery replacement is typically user-serviceable.
• čišćenje: Keep the UPS clean and free of dust. Use a dry cloth to wipe down the exterior. Ensure ventilation openings are not obstructed.
• Uslovi okoline: Operate the UPS within recommended temperature and humidity ranges to maximize battery life and overall performance.

6. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri radu s vašim UPS-om.

• UPS se ne uključuje: Ensure the battery is properly connected and the UPS is plugged into a live wall outlet. Check the circuit breaker on the rear panel.
• Kratko vrijeme rada: The battery may not be fully charged, or it may be nearing the end of its service life. Allow for a full 24-hour charge or consider battery replacement.
• Neprestano bipanje: This usually indicates the UPS is operating on battery power due to a utility power outage or a low battery condition. Check your utility power.
• Indikacija preopterećenja: If the UPS displays an overload warning, disconnect non-essential equipment from the battery backup outlets and press the overload protector reset button.
• Nema struje u utičnicama: Verify the UPS is turned on and receiving utility power. Check if the outlets are 'Battery Backup + Surge' or 'Surge Only'.

7. Specifikacije

8. Garancija i podrška

For detailed warranty information, product registration, and technical support, please visit the official APC by Schneider Electric webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun za kupovinu u slučaju reklamacije.