Uvod
This instruction manual provides guidance for the installation, function, and maintenance of the Moen 137403 Plug Button Kit. This kit is designed as a replacement part for Moen faucets, ensuring proper function and appearance.
Sigurnosne informacije
Always turn off the water supply to the faucet before beginning any plumbing work. Use appropriate tools and wear safety glasses to prevent injury. If you are unsure about any step, consult a qualified plumber.
Sadržaj paketa
The Moen 137403 Plug Button Kit typically includes the following components:
- One threaded set screw
- Assorted plug buttons/gaskets (various sizes and materials)
Slika 1: Components of the Moen 137403 Plug Button Kit. This image displays a metal threaded set screw with blue threadlocker, and below it, four circular plug buttons or gaskets. The plug buttons vary in color, including beige, light gray, and two shades of black, each with a central hole.
Postavljanje i instalacija
This kit is used to secure faucet handles and provide a finished appearance. The specific installation steps may vary slightly depending on your Moen faucet model. Refer to your faucet's specific manual for detailed instructions if available.
- Isključite dovod vode: Locate and turn off the hot and cold water supply valves under the sink.
- Remove Faucet Handle (if necessary): If replacing an existing plug button, you may need to remove the faucet handle. This often involves prying off a decorative cap to expose a screw.
- Remove Old Set Screw/Plug Button: Use an appropriate screwdriver or Allen wrench to remove the old set screw. Carefully remove any old plug button or gasket.
- Čisto područje: Clean any debris or mineral buildup from the faucet handle and stem area.
- Insert New Plug Button/Gasket: Select the appropriate plug button/gasket from the kit that matches your faucet's design. Place it into the designated recess on the faucet handle or body.
- Install New Set Screw: Insert the new threaded set screw into the faucet handle or body. Tighten it securely, but do not overtighten, to hold the handle in place. The blue material on the screw acts as a threadlocker to prevent loosening.
- Reattach Faucet Handle (if necessary): If the handle was removed, reattach it over the set screw and plug button.
- Obnova vodosnabdijevanja: Turn the hot and cold water supply valves back on.
- Provjerite ima li curenja: Operate the faucet and check for any leaks around the handle or base.
Funkcija
The Moen 137403 Plug Button Kit serves two primary functions in a faucet assembly:
- Osiguravanje ručke: The threaded set screw is crucial for firmly attaching the faucet handle to the valve stem, preventing it from becoming loose or detaching during use.
- Aesthetic Finish and Protection: The plug buttons provide a clean, finished look by covering the set screw access point. They also help prevent water and debris from entering the handle mechanism, contributing to the longevity of the faucet.
Održavanje
The Moen 137403 Plug Button Kit requires minimal maintenance. Periodically inspect the plug button for wear or damage. If the plug button appears cracked, discolored, or is missing, it should be replaced to maintain the faucet's appearance and protect the internal components.
- čišćenje: Clean the plug button with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish or material.
- Provjera nepropusnosti: If the faucet handle feels loose, gently tighten the set screw. Do not overtighten.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Faucet handle is loose. | Set screw is loose or missing. | Tighten or replace the set screw. Ensure the plug button is properly seated. |
| Plug button is missing or damaged. | Normal wear and tear, accidental removal. | Replace with a new plug button from the kit. |
| Voda curi iz baze ručke. | Not directly related to plug button, but could indicate a deeper issue. | Check internal faucet components (o-rings, cartridges). Consult a plumber if necessary. |
Specifikacije
- Broj modela: 137403
- Brand: Moen
- Materijal: Brass (set screw), various (plug buttons/gaskets)
- Boja: Unfinished (set screw), assorted (plug buttons/gaskets)
- Težina artikla: Otprilike 0.02 funti (0.353 unce)
- Dimenzije proizvoda: 0.1"W x 0.1"H (referring to individual components, overall kit dimensions vary)
- Uključene komponente: Plug Button Kit
- Zemlja porijekla: Kina
Informacije o garanciji
Moen products are manufactured under the highest standards of quality and workmanship. For specific warranty details regarding the Moen 137403 Plug Button Kit, please refer to the official Moen warranty policy available on their website or contact Moen customer service directly. Generally, Moen offers a limited lifetime warranty against leaks, drips, and finish defects to the original homeowner.
Podrška
For further assistance, technical support, or to inquire about replacement parts, please contact Moen customer service:
- Webstranica: Posjetite službeni Moen website for FAQs, product registration, and current contact information.
- Telefon: Pogledajte Moen webstranica za trenutne brojeve telefona korisničke službe.
Prilikom kontaktiranja podrške, pripremite broj modela vašeg proizvoda (137403).
