GREISINGER GOX 100 Tester za zrak - Uputstvo za upotrebu

1. Uvod

The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.

2. Sigurnosne informacije

• Read this manual thoroughly before operating the device.
• Ne izlažite uređaj ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili prekomjernoj vlazi.
• Ensure the sensor is properly connected before taking measurements.
• Only use the device for its intended purpose of measuring atmospheric oxygen.
• Uređaj i njegove komponente držite van dohvata djece.
• Odložite baterije i uređaj u skladu s lokalnim propisima.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• GREISINGER GOX 100 Oxygen Meter
• Oxygen Sensor (connected via cable)
• Uputstvo za upotrebu
• 9V Block Battery (may not be included, check packaging)

4. Podešavanje

4.1 Instalacija baterije

1. Pronađite odeljak za baterije na poleđini uređaja.
2. Otvorite poklopac odeljka za baterije.
3. Insert a 9V block battery, ensuring correct polarity.
4. Čvrsto zatvorite poklopac odeljka za baterije.

4.2 Povezivanje senzora

The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.

The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje

• Da biste uključili uređaj, pritisnite on/off dugme. Displej će se osvijetliti.
• Da biste isključili uređaj, pritisnite i držite on/off dugme dok se displej ne isključi.

5.2 Mjerenje

• Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
• Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.

5.3 MIN/MAX Value Recall

• Pritisnite način rada button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
• To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).

5.4 Automatic Off Function

The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.

6. Kalibracija

Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.

1. Ensure the device and sensor are at a stable temperature.
2. Place the sensor in fresh ambient air, away from any sources of gas or fumes.
3. Pritisnite i držite cal button until the display indicates calibration mode.
4. The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
5. Once calibration is complete, the device will return to normal measurement mode.

The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.

7. Održavanje

7.1 Zamjena senzora

The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:

1. Isključite uređaj.
2. Carefully disconnect the old sensor from the cable.
3. Connect the new, compatible GREISINGER oxygen sensor.
4. Izvršite kalibraciju kako je opisano u Odjeljku 6.

7.2 Čišćenje

• Očistite uređaj casing s mekim, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Ensure no liquid enters the device or sensor connections.
• Keep the sensor clean and free from dust or debris.

8. Otkrivanje problema

9. Tehničke specifikacije

10. Garancija i podrška

GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER website.

For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official webweb-mjesto ili kontakt informacije navedene u dokumentaciji vašeg proizvoda.