Progress Lighting P3597-09 Semi-Flush Fixture Instruction Manual

1. Uvod

Thank you for choosing the Progress Lighting P3597-09 Semi-Flush Fixture. This fixture is part of the North Park Collection, offering a modern interpretation of the classic Craftsman style with clean linear forms and square etched glass. It is designed to provide a softly diffused lighting effect and can be installed as either a close-to-ceiling or a hanging fixture, with all necessary hardware included. This manual will guide you through the installation, operation, and maintenance of your new lighting fixture.

Figure 1.1: The P3597-09 fixture shown in its semi-flush mounting configuration. It features a brushed nickel finish and square etched glass, embodying a Craftsman and Mission design blend.

2. Sigurnosne informacije

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause serious damage to property. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.

• Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Ne spajajte ovaj uređaj na neuzemljeni električni sistem.
• Nemojte prekoračiti maksimalnu snagutage specified for the bulbs (2 x 100-Watt medium base bulbs).
• Pažljivo rukujte staklenim komponentama kako biste spriječili lomljenje.
• Uvjerite se da su svi priključci sigurni i pravilno izolirani.

3. Sadržaj paketa

Carefully unpack your fixture and identify all parts. Keep the packaging materials until you are sure all parts are present and in good condition. If any parts are missing or damaged, do not attempt to install the fixture.

• Fixture Body with Brushed Nickel Finish
• Square Etched Glass Shade
• Mounting Hardware (Crossbar, Screws, Wire Nuts)
• Chain (for hanging installation option)
• Ceiling Mount Canopy (for semi-flush installation option)
• Uputstvo za upotrebu

4. Postavljanje i instalacija

This fixture offers two installation options: semi-flush mount or hanging with a chain. Choose the appropriate method for your space.

4.1. Predinstalacija

1. Isključite struju na prekidaču.
2. Remove existing fixture (if applicable).
3. Identify supply wires: black (hot), white (neutral), and green or bare copper (ground).

4.2. Semi-Flush Mount Installation

1. Pričvrstite montažnu poprečnu šipku na kutiju s utičnicom pomoću priloženih vijaka.
2. Connect the fixture's ground wire to the supply ground wire using a wire nut.
3. Connect the fixture's white wire to the supply white (neutral) wire.
4. Connect the fixture's black wire to the supply black (hot) wire.
5. Pažljivo uvucite sve žice u utičnicu.
6. Align the fixture's canopy with the mounting screws on the crossbar and secure it in place.
7. Attach the etched glass shade to the fixture body according to the specific design (usually by twisting or securing with decorative nuts).

Slika 4.1: Detaljan view of the brushed nickel finish and the connection point for the etched glass shade, illustrating the quality of the material and craftsmanship.

4.3. Hanging Fixture Installation (with Chain)

1. Follow steps 1-5 from the Semi-Flush Mount Installation.
2. Determine the desired hanging length and adjust the chain accordingly.
3. Thread the fixture's electrical wires through the chain and the canopy.
4. Secure the chain to the mounting loop on the crossbar and to the fixture body.
5. Slide the canopy up the chain and secure it to the ceiling, covering the outlet box.
6. Attach the etched glass shade to the fixture body.

Figure 4.2: The P3597-09 fixture configured for hanging installation, showcasing the included chain and how it integrates with the fixture's design.

Slika 4.3: Krupni plan view of the chain's connection point to the fixture's top canopy, demonstrating the secure and integrated design for hanging applications.

5. Uputstvo za upotrebu

Once the fixture is securely installed and wired, you can begin operation.

1. Instalirajte žarulje: Insert two (2) 100-Watt maximum medium base (E26) incandescent bulbs into the sockets. Ensure bulbs are fully seated.
2. Vrati snagu: Ponovo uključite napajanje na glavnom prekidaču.
3. Aktiviraj svjetlo: Use the wall switch connected to the fixture to turn the light on and off.

The etched glass shade provides a softly diffused light, ideal for various indoor settings.

6. Održavanje

Redovno održavanje će pomoći u očuvanju izgleda i funkcionalnosti vašeg uređaja.

• čišćenje: To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass. For the etched glass, a slightly damp Može se koristiti krpa, a zatim suha krpa.
• Zamjena žarulje: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Replace with bulbs of the same type and wattage (2 x 100-Watt max, medium base).
• inspekcija: Povremeno provjeravajte ožičenje i spojeve na znakove habanja ili oštećenja. Ako pronađete bilo kakve probleme, obratite se kvalificiranom električaru.

7. Otkrivanje problema

Ako vaš uređaj ne radi ispravno, pogledajte sljedeće uobičajene probleme i rješenja:

If the problem persists after trying these solutions, please contact a qualified electrician or Progress Lighting customer support.

8. Specifikacije

Detailed technical specifications for the P3597-09 fixture:

Figure 8.1: Dimensional diagram of the P3597-09 fixture, indicating a width of 12-3/4 inches and a height of 13-5/8 inches.

9. Garancija i podrška

Progress Lighting offers a 1-Year Limited Warranty on this product, covering defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer support. Refer to the contact information provided on the product packaging or the official Progress Lighting website.

Proizvođač: Progres Lighting
Mjesto poslovanja: GREENVILLE, SC, 29607 US