VWR B001UI040W

VWR Digital Refrigerator/Freezer Thermometer with Alarm User Manual

Brand: VWR

Model: B001UI040W

1. Uvod

This manual provides instructions for the proper setup, operation, and maintenance of your VWR Digital Refrigerator/Freezer Thermometer with Alarm. This device is designed to accurately monitor temperatures in refrigerators and freezers, featuring a digital display and an audible alarm for temperature excursions.

Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe proizvoda kako biste osigurali siguran i efikasan rad.

2. Sigurnosne informacije

3. Sadržaj paketa

4. Značajke proizvoda

VWR Digital Refrigerator/Freezer Thermometer with Alarm, showing the main unit with digital display, control buttons, and a connected remote probe.

Slika 1: VWR Digital Refrigerator/Freezer Thermometer. The image displays the white main unit with a blue-bordered digital screen showing "33.7°F" and "FRIDGE" indicator. Buttons for MAX/MIN, ROOM/FRIDGE, and an alarm bell icon are visible on the right. A white wired probe extends from the left side of the unit.

5. Podešavanje

  1. Instalacija baterije:
    • Pronađite odeljak za baterije na poleđini glavne jedinice.
    • Otvorite poklopac odjeljka.
    • Insert the required batteries (e.g., AAA, check compartment for type) ensuring correct polarity (+/-).
    • Čvrsto zatvorite poklopac odeljka za baterije.
  2. Položaj sonde:
    • Carefully route the remote temperature probe into the refrigerator or freezer. Ensure the cable is not pinched by the door seal, which could damage the cable or compromise the seal.
    • Place the probe tip in the area where temperature monitoring is desired. Avoid placing it directly against cooling elements.
  3. Položaj glavne jedinice:
    • Attach the main unit to the exterior of the refrigerator or freezer using its built-in magnets.
    • Ensure the display is easily visible for regular temperature checks.

6. Uputstvo za upotrebu

  1. Uključivanje/isključivanje:

    The device typically powers on automatically upon battery installation. There may not be a dedicated power button; removal of batteries usually powers it off.

  2. Switching Temperature Display (Room/Fridge):

    Pritisnite ROOM/FRIDGE button to toggle between displaying the ambient room temperature (measured by a sensor in the main unit) and the temperature measured by the remote probe (for the fridge/freezer).

  3. Viewing MAX/MIN Temperatures:

    Pritisnite MAX/MIN button once to display the maximum temperature recorded since the last reset. Press it again to display the minimum temperature. Press a third time to return to the current temperature display.

  4. Resetting MAX/MIN Temperatures:

    While MAX or MIN temperature is displayed, press and hold the MAX/MIN button for a few seconds until the display resets to the current temperature. This clears the recorded high and low values.

  5. Funkcija alarma:

    The device features an alarm. Press the Ikona zvona button to activate or deactivate the alarm. If the temperature goes outside a pre-set range, an audible alarm will sound. (Specific instructions for setting alarm thresholds are not available; refer to the device's on-screen prompts or manufacturer's website for advanced settings if applicable).

  6. Promjena temperaturnih jedinica (°C/°F):

    Look for a small switch or button, often located in the battery compartment or on the back of the unit, to switch between Celsius (°C) and Fahrenheit (°F) display.

7. Održavanje

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Nema ekrana ili ekran je tamanSlabe ili prazne baterije; nepravilna ugradnja baterija.Zamijenite baterije, pazeći na ispravan polaritet.
Netačna očitavanja temperatureProbe improperly placed; probe damaged; unit malfunction.Reposition probe away from direct cooling elements. Check probe for visible damage. If issues persist, contact support.
Alarm se ne oglašavaAlarm deactivated; temperature not outside set range; low batteries.Press the Bell Icon button to activate the alarm. Verify temperature conditions. Replace batteries.
Dugmad ne reagirajuUnit frozen (in extreme cold); low batteries; internal malfunction.Bring unit to room temperature. Replace batteries. If problem persists, contact support.

9. Specifikacije

10. Garancija i podrška

Specific warranty information for the VWR Digital Refrigerator/Freezer Thermometer with Alarm is typically provided with the product packaging or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact VWR customer service or visit their official website. Contact details are usually available on the product packaging or the manufacturer's website.

Proizvođač: Vwr

Povezani dokumenti - B001UI040W

Preview VWR Uputstvo za upotrebu za linearno tresivo vodeno kupatilo od 12 i 18 litara
Sveobuhvatno uputstvo za upotrebu za VWR linearne tresilice od 12 i 18 litara. Obuhvata sigurnosne mjere, podešavanje, rad, specifikacije, održavanje, rješavanje problema, garanciju i odlaganje.
Preview VWR Traceable Workstation Barometer with Clock: User Manual and Specifications
Comprehensive guide to operating the VWR Traceable Workstation Barometer with Clock, including setup, features like barometric pressure, temperature, weather forecasting, alarm functions, and technical specifications. Also includes details for the VWR Thermometer.
Preview Vodič za VWR laboratorijske proizvode: Sveobuhvatni katalog naučne opreme i potrošnog materijala
Istražite Vodič za laboratorijske proizvode VWR-a, koji sadrži širok asortiman visokokvalitetne laboratorijske opreme, potrošnog materijala i pribora za naučna istraživanja i primjene, uključujući kulture ćelija, PCR, laboratorijske potrepštine, opremu i laboratorijski namještaj.
Preview VWR Uputstvo za upotrebu elektronske pipete: Rad, održavanje i specifikacije
Sveobuhvatan vodič za VWR elektronsku pipetu, koji detaljno opisuje njene karakteristike, načine rada, rad, rješavanje problema i održavanje za precizno rukovanje tekućinama u laboratoriju.
Preview VWR Mini Bead Mill Homogeniser Quick Start Guide - Model 432-0366
Quickly set up and operate your VWR Mini Bead Mill Homogeniser (Model 432-0366) with this essential quick start guide. Learn about safety, unpacking, controls, and basic operation for efficient laboratory sample obrada.
Preview VWR Uputstvo za upotrebu platforme za ljuljanje
Sveobuhvatno uputstvo za upotrebu VWR ljuljačke platforme, koje detaljno opisuje njene karakteristike, rad, sigurnosne mjere predostrožnosti, instalaciju, održavanje i rješavanje problema za laboratorijsku upotrebu.