Bostitch 21680B 80 Series Fine Wire Stapler Instruction Manual

1. Proizvod je gotovview

The Bostitch 21680B is an air-powered fine wire stapler designed for various fastening applications. This tool is engineered for efficiency and durability, utilizing 80 series staples with a 1/2-inch crown and leg lengths ranging from 1/4 inch to 1/2 inch.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Bostitch 21680B stapler.

Image: The Bostitch 21680B Fine Wire Stapler, showcasing its yellow and black design and staple magazine.

2. Sigurnosne informacije

Always observe the following safety precautions when operating the Bostitch 21680B stapler to prevent injury and tool damage:

• Pročitajte i razumite sva uputstva prije upotrebe alata.
• Nosite odgovarajuću ličnu zaštitnu opremu (LZO), uključujući zaštitne naočale sa bočnim štitnicima, zaštitu za sluh i rukavice.
• Ensure the air compressor is set to the recommended operating pressure (refer to specifications). Do not exceed the maximum allowable pressure.
• Disconnect the air supply before loading staples, performing maintenance, clearing jams, or when the tool is not in use.
• Nikada nemojte usmjeravati alat u sebe ili druge.
• Keep hands and body parts clear of the discharge area.
• Use only the specified staples for this tool.
• Ne koristite alat ako je oštećen ili neispravan.
• Održavajte radni prostor čistim i dobro osvijetljenim.

3. Komponente

Familiarize yourself with the main components of your stapler:

• okidač: Aktivira mehanizam za heftanje.
• Magazin: Holds the strip of staples.
• Izduvni priključak: Releases compressed air.
• Dovod zraka: Mjesto spajanja crijeva za zrak.
• Kontaktirajte putovanje: Sigurnosni mehanizam koji se mora pritisnuti na radni komad da bi se alat aktivirao.

4. Podešavanje

4.1 Povezivanje na dovod zraka

1. Provjerite je li kompresor zraka isključen i je li spremnik zraka ispražnjen.
2. Attach a quick-connect fitting (not included) to the stapler's air inlet.
3. Connect the air hose from the compressor to the stapler's quick-connect fitting.
4. Set the air compressor regulator to the recommended operating pressure (typically 70-100 PSI, refer to tool specifications for exact range).
5. Uključite zračni kompresor.

4.2 Ubacivanje spajalica

1. Isključite dovod zraka prije umetanja spajalica.
2. Push the magazine latch or release button to open the staple magazine.
3. Insert a strip of 80 series staples into the magazine with the staple points facing down. Ensure the staples are correctly oriented.
4. Close the magazine until it latches securely.
5. Ponovo spojite dovod zraka.

5. Uputstvo za upotrebu

5.1 Osnovni rad

1. Ensure the stapler is properly loaded with staples and connected to the air supply.
2. Hold the stapler firmly with both hands.
3. Place the nose of the tool (contact trip) firmly against the workpiece where the staple is to be driven.
4. Squeeze the trigger to drive a staple.
5. Otpustite okidač i podignite alat s radnog komada.

5.2 Depth Adjustment (If applicable)

Some models may feature a depth adjustment mechanism. If your model includes this feature, refer to the markings on the tool for adjusting staple depth. Rotate the adjustment dial or lever to achieve the desired staple penetration.

6. Održavanje

Regular maintenance ensures optimal performance and extends the life of your stapler.

6.1 Dnevno održavanje

• Isključite dovod zraka.
• Add 3-5 drops of pneumatic tool oil (not included) into the air inlet before each use.
• Wipe down the tool with a clean, dry cloth to remove dust and debris.
• Provjerite sve vijke i pričvršćivače da li su čvrsto pričvršćeni. Zategnite po potrebi.

6.2 Održavanje zračnog kompresora

Regularly drain moisture from your air compressor tank to prevent rust and ensure clean air supply to the tool.

6.3 Skladištenje

Store the stapler in a clean, dry environment, disconnected from the air supply.

7. Otkrivanje problema

Za uklanjanje zaglavljenog papira: Isključite dovod zraka. Open the magazine and carefully remove any jammed staples or debris. Do not force staples out. Reconnect air supply and test.

8. Specifikacije

• Model: 21680B
• Staple Series: 80 Series
• Veličina krune: 1/2 inča
• Dužina nogu: 1/4 inča do 1/2 inča
• Izvor napajanja: Na zračni pogon
• Radni pritisak: Typically 70-100 PSI (consult tool for exact range)
• Kapacitet magazina: Full Strip (approximately 156 fasteners)
• Težina artikla: 2.15 funte
• Materijal: Metal
• Boja: Žuta
• Uključene komponente: Prilozi
• Proizvođač: Stanley Bostitch

9. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the official Bostitch webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.