EUFAB APA 16540 Power Pack with Compressor and Jump Starter 12V - Instruction Manual

Uvod

Thank you for choosing the EUFAB APA 16540 Power Pack. This versatile device combines a 12V jump starter, an air compressor, and a portable 12V power source, making it an essential tool for automotive, camping, and marine applications. This manual provides important information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference.

Sigurnosna uputstva

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može dovesti do strujnog udara, požara i/ili ozbiljnih povreda.

• Uvijek nosite zaštitu za oči i zaštitne rukavice pri radu s baterijama.
• Do not smoke or allow sparks or flames in the vicinity of the battery or power pack. Batteries generate explosive gases.
• Ensure proper ventilation when charging or using the jump starter.
• Držite uređaj dalje od djece i neovlaštenih osoba.
• Do not expose the power pack to rain or wet conditions.
• Never short-circuit the jump starter clamps.
• If battery acid comes into contact with skin or eyes, flush immediately with plenty of clean water and seek medical attention.
• Ne pokušavajte pokrenuti smrznuti akumulator pomoću kablova.
• Ensure the vehicle's ignition is off before connecting the jump starter.
• Do not use the compressor for more than 10 minutes continuously to prevent overheating. Allow it to cool down before further use.

Product Overview

The EUFAB APA 16540 Power Pack is designed for portability and multi-functionality. It features a robust casing with an integrated carrying handle, making it easy to transport.

Slika 1: Prednja strana view of the EUFAB APA 16540 Power Pack, showing the integrated compressor with pressure gauge and the main power switch.

Komponente:

• Jump Start Cables: Crveni (+) i crni (-) clamps for vehicle battery connection.
• Kompresor za zrak: Integrated compressor with a hose and various adapters for inflation.
• Manometar: Displays current air pressure during inflation.
• 12V DC utičnica: For powering 12V accessories.
• LED radno svjetlo: Obezbjeđuje osvjetljenje u uslovima slabog osvjetljenja.
• Indikator nivoa baterije: LEDs to show the charge status of the internal battery.
• Priključci za punjenje: Input for 230V AC adapter and 12V DC car charger.
• Integrisana ručka za nošenje: Za lakši transport.

Slika 2: Vrh view of the Power Pack, highlighting the ON/OFF switch, LED work light, and battery level indicators.

Podešavanje i početno punjenje

Before first use, fully charge the EUFAB APA 16540 Power Pack for at least 12-15 hours. Regular charging is crucial for maintaining battery life and performance.

Punjenje Power Pack-a:

1. Using the 230V AC Adapter:
   • Connect the 230V AC adapter to the charging port on the power pack.
   • Priključite adapter u standardnu ​​zidnu utičnicu.
   • The charging indicator LED will illuminate (typically red during charging, turning green when fully charged).
   • Charge until the indicator shows full charge.
2. Using the 12V DC Car Charger:
   • Connect the 12V DC car charger to the charging port on the power pack.
   • Drugi kraj uključite u utičnicu za upaljač za cigarete od 12 V u vašem vozilu.
   • The charging indicator LED will illuminate.
   • Charge until the indicator shows full charge.

It is recommended to recharge the power pack every 2-3 months, even when not in use, to ensure optimal battery health.

Operacija

1. Paljenje vozila pomoću kablova

Use this function to start vehicles with a discharged 12V battery.

1. Ensure the vehicle's ignition is OFF and all accessories (lights, radio, etc.) are turned off.
2. Povežite crveno (+) jump start clamp to the pozitivno (+) terminal of the vehicle's discharged battery.
3. Povežite crna (-) jump start clamp to a clean, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do NOT connect to the negative (-) battery terminal directly.
4. Uvjerite se da su sve veze sigurne.
5. Turn on the power pack's jump start function (if applicable, refer to specific switch on your model).
6. Attempt to start the vehicle. If it doesn't start after 5-6 seconds, wait at least 3 minutes before trying again.
7. Čim se vozilo pokrene, odmah isključite crna (-) clamp from the chassis, then disconnect the crveno (+) clamp iz baterije.
8. Turn off the power pack.

Figure 3: The Power Pack connected to a vehicle's battery terminals for jump-starting. Note the correct connection order for safety.

2. Korištenje zračnog kompresora

The integrated compressor can inflate tires, sports equipment, and other inflatables.

1. Ensure the power pack is adequately charged.
2. Screw the compressor hose adapter onto the valve stem of the item to be inflated. For different items (e.g., bicycle tires, inflatable mattresses), use the appropriate adapter provided.
3. Check the pressure gauge for the current pressure.
4. Uključite prekidač kompresora.
5. Monitor the pressure gauge closely. Once the desired pressure is reached, turn off the compressor switch.
6. Unscrew the hose adapter from the valve stem.

Važno: Do not over-inflate. Refer to the manufacturer's recommended pressure for the item you are inflating. Do not operate the compressor for more than 10 minutes continuously. Allow a cooling period of at least 15 minutes between uses.

Figure 4: The Power Pack's compressor in use, inflating a car tire. The pressure gauge is visible for monitoring.

3. Using the 12V DC Power Socket

The 12V DC socket can power various 12V accessories (e.g., car vacuum cleaners, portable coolers) up to a maximum current draw.

1. Ensure the power pack is adequately charged.
2. Plug your 12V accessory into the 12V DC socket on the power pack.
3. Turn on the power pack's 12V output switch (if available).
4. When finished, turn off the output switch and unplug the accessory.

Napomena: The 12V socket is protected by an internal fuse. If an accessory does not work, check the accessory's power requirements and the power pack's charge level.

4. Korištenje LED radnog svjetla

The integrated LED light provides convenient illumination.

• Locate the switch for the LED light (refer to Figure 2).
• Toggle the switch to turn the light ON or OFF.

Održavanje

Održavanje baterije:

• Recharge the power pack immediately after each use.
• If not in frequent use, recharge the power pack every 2-3 months to prevent deep discharge and prolong battery life.
• Do not store the power pack in extreme temperatures (hot or cold).

čišćenje:

• Wipe the exterior of the power pack with a soft, damp tkanina.
• Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.
• Ensure all ports and openings are free from dust and debris.

Skladištenje:

• Store the power pack in a cool, dry place, away from direct sunlight and moisture.
• Keep the jump start clampčist je i bez korozije.

Rješavanje problema

Specifikacije

• Model: APA 16540
• Vrsta baterije: Olovna kiselina
• Battery Voltage: 12 V
• Kapacitet baterije: 7 Ah (7000 mAh) / 10 Ah (10000 mAh) - Note: Discrepancy in source data, using both for clarity.
• Skok Startna struja: 250 A (maks. 500 A)
• Compressor Pressure: 18 bara (260 PSI)
• 12V DC Socket Output: 1 x 12 V
• Ulaz za punjenje: 230V AC adapter or 12V DC car charger
• Dimenzije (D x Š x V): Približno 25.5 x 23 x 16.5 cm (10 x 9 x 6.5 inča)
• Težina: Približno 3.8 kg (8.38 lbs)
• Posebne karakteristike: LED Light, Portable
• Certifikati: CE

Garancija i podrška

The EUFAB APA 16540 Power Pack is designed for durability and performance. Spare parts availability is typically 1 year from the date of purchase.

For technical support, warranty claims, or questions not covered in this manual, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty purposes.

Manufacturer: APA

Marka: EUFAB