Draytek Vigor 3120 G.SHDSL Security Router User Manual

1. Uvod

The Draytek Vigor 3120 is a G.SHDSL Security Router designed for reliable and secure network connectivity. It features a G.SHDSL WAN port for high-speed digital subscriber line connections, along with multiple LAN ports for local network devices. This router integrates advanced security features such as a comprehensive firewall and VPN capabilities to ensure secure and efficient network operations.

2. Vodič za postavljanje

2.1. Sadržaj paketa

Prije nego što nastavite, provjerite da li su sve komponente prisutne:

• Draytek Vigor 3120 Router
• Adapter za napajanje
• Ethernet kabl
• Vodič za brzi početak (ako je uključen)

2.2. Fizičke veze

Refer to the image below for port identification on the front panel of the Vigor 3120 router.

Figure 1: Front Panel of Draytek Vigor 3120 Router. This image displays the router's front panel, highlighting the DSL port, four LAN ports, a USB port, and various LED indicators for activity, VPN, QoS, PRN, DSL link, LAN link/activity, and a reset button.

1. Priključak za napajanje: Spojite adapter za napajanje na ulaz za napajanje rutera, a zatim na utičnicu.
2. WAN Connection (DSL): Connect your G.SHDSL line to the router's DSL luka.
3. LAN veze: Connect your local network devices (computers, switches, access points) to the router's LAN 1-4 luke.
4. USB veza: For 3.5G Mobile Broadband support or other USB devices, connect a compatible USB modem or device to the USB luka.

2.3. Početna konfiguracija

Za pristup ruteru web-bazirano upravljanje interfejsom:

1. Ensure your computer is connected to one of the router's LAN ports.
2. Otvori a web preglednik (npr. Chrome, Firefox, Edge).
3. In the address bar, type the default IP address (commonly 192.168.1.1 or refer to the Quick Start Guide) and press Enter.
4. Unesite zadano korisničko ime i lozinku (obično admin za oboje, ili kako je navedeno u vodiču).
5. Follow the on-screen wizard for initial setup, including WAN configuration and wireless settings.

3. Uputstvo za upotrebu

3.1. G.SHDSL WAN Connectivity

The Vigor 3120 provides a dedicated G.SHDSL WAN port for high-speed, symmetrical digital subscriber line connections. Configure your G.SHDSL parameters, such as encapsulation mode and VPI/VCI settings, through the router's web interface under the WAN settings.

3.2. Wireless (802.11n) Configuration

The router provides 802.11n wireless connectivity. Access the "Wireless LAN" section in the web interfejs za:

• Set up your Wi-Fi network name (SSID).
• Configure security settings (WPA2-PSK recommended).
• Podesite postavke kanala i propusnog opsega za optimalne performanse.

3.3. VPN (Virtual Private Network)

The Vigor 3120 supports various VPN protocols (e.g., IPSec, PPTP, L2TP) for secure remote access and site-to-site connections. Configure VPN tunnels via the "VPN" menu in the web interfejs.

3.4. Firewall and Security

Utilize the built-in firewall to protect your network. Features include:

• Filtriranje paketa
• DoS/DDoS odbrana
• Filtriranje sadržaja
• Object-based Firewall Rules

3.5. USB 3.5G Support

The USB port allows connection of a 3.5G USB modem for mobile broadband connectivity, serving as a backup or primary connection. Ensure your 3.5G modem is compatible with the Vigor 3120.

4. Održavanje

4.1. Ažuriranja firmvera

Regularly check the Draytek website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Always back up your configuration before performing a firmware update.

4.2. Sigurnosna kopija i vraćanje konfiguracije

It is recommended to back up your router's configuration settings periodically. This allows for quick restoration of your settings in case of a factory reset or hardware replacement. Access this feature in the "System Maintenance" section of the web interfejs.

4.3. Cleaning and Environment

Keep the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

5. Otkrivanje problema

5.1. LED indikatori

LED diode na prednjoj ploči pružaju informacije o statusu:

• POČINITI: Označava aktivnost sistema.
• VPN: Lit when a VPN tunnel is active.
• QoS: Indicates Quality of Service is active.
• PRN: Printer status (if USB printer connected).
• DSL: Indicates DSL line status (link/activity).
• LNK/LAN (1-4): Indicates link status and activity for each LAN port.
• prvo: Dugme za resetovanje (pritisnite i držite za fabričko vraćanje na tvorničke postavke).

5.2. Uobičajeni problemi i rješenja

• Nema internetske veze:
  • Check DSL cable connection.
  • Verify DSL modem/line status.
  • Ensure WAN settings in router are correct (e.g., G.SHDSL parameters).
  • Reboot DSL modem and router.
• Spore mrežne performanse:
  • Check for high bandwidth usage by devices.
  • Verify wireless channel interference.
  • Uvjerite se da je firmver ažuran.
• Ne mogu pristupiti Web Interfejs:
  • Ensure computer is connected to a LAN port.
  • Verify computer's IP address is in the same subnet as the router.
  • Pokušajte drugačije web pretraživač.
  • Perform a soft reboot of the router.

Ako problemi i dalje postoje, razmislite o vraćanju na tvorničke postavke (note: this will erase all configurations) or contact technical support.

6. Specifikacije

7. Informacije o garanciji

Draytek products typically come with a limited manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Draytek webSačuvajte dokaz o kupovini za slučaj reklamacije.

8. Tehnička podrška

For technical assistance, product inquiries, or advanced configuration guidance, please contact Draytek technical support:

• Službeno Webstranica: Posjetite www.draytek.com for support resources, FAQs, firmware downloads, and contact information.
• Online podrška: Many regions offer online ticketing systems or email support.
• Telefonska podrška: Check the Draytek webstranica za regionalne brojeve telefonske podrške.

When contacting support, have your product model (Vigor 3120 / VIGOR3120) and serial number ready.